All<br><br>I am seeing similar which happed in the early hours of the morning, I am not seeing the reverse, <br><br>If I connect to the device and do a show run I see "no names" in the running config but not in the start-up config. The show run also tells me that my config has not been changed since 18th November, therefore I must conclude that this addition in the config did not get added by the CLI or Web interface but by other means. I am starting to look at bug tracker on <a href="http://cisco.com">cisco.com</a> for SNMP bugs.<br>
<br>Do a "show version" from the enabled CLI<br><div style="margin-left: 40px;">this will tell you the last user to modify the config and the date and time when this was done<br></div><div style="margin-left: 40px;">
"Configuration last modified by <XXX> at 10:38:56.343 UTC Wed Nov 18 2009"<br>Check this with the time and date of the rancid config, I get rancid to pull configs every hour and I could pin point this to a one hour window between 6 and 7 am<br>
</div>check your stat up config <br><div style="margin-left: 40px;">"show startup-config | include no names"<br>Its not in my start up config.<br><br></div>However on other ASA's I am see this and it flips several times a day<br>
<br><div style="margin-left: 40px;"> !BootFlash: Current BOOT variable = disk0:/asa804-k8.bin<br> !BootFlash: CONFIG_FILE variable = <br> !BootFlash: Current CONFIG_FILE variable = <br> !<br>- !BootFlash: BOOT variable = disk0:/asa804-k8.bin<br>
+ !BootFlash: BOOT variable = <br> !BootFlash: Current BOOT variable = disk0:/asa804-k8.bin<br> !BootFlash: CONFIG_FILE variable = <br> !BootFlash: Current CONFIG_FILE variable = <br></div><br><br><br><br><div class="gmail_quote">
2009/11/25 Martin Barry <span dir="ltr"><<a href="mailto:marty@supine.com">marty@supine.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Just recently configured RANCID and am having isssues with an ASA. It<br>
alternates between "names" output and "no names" output. Sample<br>
snippets:<br>
<br>
- names<br>
+ no names<br>
<br>
- ip address Internet-Transit 255.255.255.248 standby 192.168.0.2<br>
+ ip address 192.168.0.1 255.255.255.248 standby 192.168.0.2<br>
<br>
An hour later I get the reverse.<br>
<br>
Any ideas?<br>
<br>
OS: OpenSUSE 11.2<br>
RANCID: 2.3.2<br>
Expect: 5.44.1.11<br>
<br>
cheers<br>
Marty<br>
_______________________________________________<br>
Rancid-discuss mailing list<br>
<a href="mailto:Rancid-discuss@shrubbery.net">Rancid-discuss@shrubbery.net</a><br>
<a href="http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss" target="_blank">http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss</a><br>
</blockquote></div><br>