<div dir="ltr">Hi,<div style>When I run bin/clogin 192.168.150.1 I can log into my Enterasys Switch.</div><div style>Since I am using an Enterasys Switch I should be using rivlogin since this is what rancid-run will use for my vendor.</div>
<div style>But when I run rivlogin I get:</div><div style><div>$ bin/rivlogin 192.168.150.1</div><div>192.168.150.1</div><div>ERROR: no enable password found for 192.168.150.1 in /usr/local/rancid/.cloginrc.</div><div>$ </div>
<div><br></div><div style>My Understanding if I do add autoenable 192.168.150.1 1 then the 1 would tell the script not to use the enable password. Or is there something in the script I need to change? </div><div style>When I finally run the rancid-run I will edited the rivlogin script to do just a show config or show config all.</div>
<div><br></div><div># Rancid .cloginrc setup</div><div>add user 192.168.150.1 tacacssu</div><div>add password 192.168.150.1 tacacs</div><div>add autoenable 192.168.150.1 1</div><div>add method 192.168.150.1 ssh</div></div>
<div><br></div><div class="gmail_extra">Thanks</div><div class="gmail_extra">Scott<br><br><div class="gmail_quote">On Fri, Apr 5, 2013 at 12:00 PM, Marito ... <span dir="ltr"><<a href="mailto:me_gogorza@hotmail.com" target="_blank">me_gogorza@hotmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div><div dir="ltr">Scott,<br>
<br>
Please check in your router.db which vendor you setup. As per your log file , the script is trying to execute "system show XXXX", while the rancid script executes "show XXXX". <br>
<br>
I think you are using the rivrancid/rivlogin scripts for this devices. Instead of using clogin, try rivlogin -c 'system show XXXX' 192.168.150.1 (where XXXX is your comand)<br> <br>
<div></div>
Regards.<br>
Mario<br>
<br>
<div>
<hr>
</div>
<div>Date: Fri, 5 Apr 2013 10:28:11 -0400<br>From: <a href="mailto:sgilmour@enterasys.com" target="_blank">sgilmour@enterasys.com</a><br>To: <a href="mailto:rwest@zyedge.com" target="_blank">rwest@zyedge.com</a><br>CC: <a href="mailto:rancid-discuss@shrubbery.net" target="_blank">rancid-discuss@shrubbery.net</a><br>
Subject: Re: [rancid] Release Authorised RANCID Email Issue<br><br></div>
<div dir="ltr">Ryan,
<div>Here is the output:</div>
<div><br></div>
<div>
<div>$ bin/rancid -d 192.168.150.1</div>
<div>executing clogin -t 90 -c"show version;show redundancy secondary;show idprom backplane;show install active;show env all;show rsp chassis-info;show gsr chassis;show diag chassis-info;show boot;show bootvar;show variables boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all sup-bootdisk:;dir /all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show config;show controllers cbus;show diagbus;show diag;show capture;show module;show spe version;show c7200;show inventory raw;show vtp status;show vlan;show vlan-switch;show debug;show shun;more system:running-config;show running-config view full;show running-config;show config;write term" 192.168.150.1</div>
<div>sh: 1: clogin: not found</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): dir /all slavedisk2:,show rsp chassis-info,show capture,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,show running-config view full,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,show install active,show bootvar,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show module,show shun,show controllers,show diagbus,more system:running-config,dir /all slavedisk0:,show debug,show idprom backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all sec-slot0:,show config,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,dir /all nvram:,show version,show vlan-switch,show redundancy secondary,show running-config,show c7200,dir /all slot1:</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): dir /all slavedisk2:,show rsp chassis-info,show capture,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,show running-config view full,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,show install active,show bootvar,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show module,show shun,show controllers,show diagbus,more system:running-config,dir /all slavedisk0:,show debug,show idprom backplane,dir /all bootflash:,dir /all sup-bootdisk:,dir /all sec-slot0:,show config,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,dir /all nvram:,show version,show vlan-switch,show redundancy secondary,show running-config,show c7200,dir /all slot1:</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div>!</div>
<div>you have mail</div>
<div>$</div>
<div><br></div>
<div><br></div>
<div>Starting rancid-run</div>
<div> bin/rancid-run</div>
<div>/usr/local/rancid/var/logs/networking.20130405.102327</div>
<div><br></div>
<div>starting: Fri Apr 5 10:23:27 EDT 2013</div>
<div><br></div>
<div><br></div>
<div><br></div>
<div>Trying to get all of the configs.</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: End of run not found</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: End of run not found</div>
<div>!</div>
<div>!</div>
<div>!</div>
<div>=====================================</div>
<div>Getting missed routers: round 1.</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: End of run not found</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: End of run not found</div>
<div>!</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div>!</div>
<div>!</div>
<div>=====================================</div>
<div>Getting missed routers: round 2.</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: End of run not found</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: End of run not found</div>
<div>!</div>
<div>!</div>
<div>!</div>
<div>=====================================</div>
<div>Getting missed routers: round 3.</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: End of run not found</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: End of run not found</div>
<div>!</div>
<div>!</div>
<div>!</div>
<div>=====================================</div>
<div>Getting missed routers: round 4.</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.1/" target="_blank">192.168.200.1</a>: End of run not found</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.200.4/" target="_blank">192.168.200.4</a>: End of run not found</div>
<div>!</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: missed cmd(s): system show hardware,system show version,system show active-config,system show uptime</div>
<div><a href="http://192.168.150.1/" target="_blank">192.168.150.1</a>: End of run not found</div>
<div>!</div>
<div>!</div>
<div><br></div>
<div>cvs diff: Diffing .</div>
<div>cvs diff: Diffing configs</div>
<div>cvs commit: Examining .</div>
<div>cvs commit: Examining configs</div>
<div><br></div>
<div>ending: Fri Apr 5 10:23:28 EDT 2013</div>
<div><br></div></div></div>
<div><br><br>
<div>On Fri, Apr 5, 2013 at 9:37 AM, Ryan West <span dir="ltr"><<a href="mailto:rwest@zyedge.com" target="_blank">rwest@zyedge.com</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;PADDING-LEFT:1ex">On Fri, Apr 05, 2013 at 08:14:19, Gilmour, Scott wrote:<br>> Subject: Re: [rancid] Release Authorised RANCID Email Issue<br>><br>> Yes I can do for example bin/clogin -c 'show config' 192.168.150.1<br>
> and that logs in without any issue.<br>> If I do a bin/rancid-run that is where my issue is occurring. I am<br>> debugging the script to see if there is something I need to edit in the script.<br>><br>Try rancid -d 192.168.150.1 and post that. What's in your logs when you try rancid-run?<br>
<br></blockquote></div><span class="HOEnZb"><font color="#888888"><br><br clear="all">
<div><br></div>-- <br>
<p style="MARGIN:0in 0in 0pt"><span style><font size="3"><font face="Calibri">Scott Gilmour | SQA Engineer</font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><span style><font size="3"><font face="Calibri">Enterasys Networks | A Siemens Enterprise Communications Company</font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><span style><font size="3"><font face="Calibri">Office: <a href="tel:%28603%29%20952-5924" value="+16039525924" target="_blank">(603) 952-5924</a></font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><font face="Calibri"><span style><font size="3">Email: </font></span><span style="COLOR:blue"><a href="mailto:sgilmour@enterasys.com" target="_blank"><font size="3">sg</font><font size="3">ilmour@enterasys.com</font></a></span></font></p>
</font></span></div><span class="HOEnZb"><font color="#888888">
<div><br>_______________________________________________ Rancid-discuss mailing list <a href="mailto:Rancid-discuss@shrubbery.net" target="_blank">Rancid-discuss@shrubbery.net</a> <a href="http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss" target="_blank">http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss</a></div>
</font></span></div></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br><p style="MARGIN:0in 0in 0pt"><span style="COLOR:black"><font size="3"><font face="Calibri">Scott Gilmour | SQA Engineer</font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><span style="COLOR:black"><font size="3"><font face="Calibri">Enterasys Networks | A Siemens Enterprise Communications Company</font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><span style="COLOR:black"><font size="3"><font face="Calibri">Office: (603) 952-5924</font></font></span></p>
<p style="MARGIN:0in 0in 0pt"><font face="Calibri"><span style="COLOR:black"><font size="3">Email: </font></span><span style="COLOR:blue"><a href="mailto:sgilmour@enterasys.com" target="_blank"><font size="3">sg</font><font size="3">ilmour@enterasys.com</font></a></span></font></p>
</div></div>