<div dir="ltr"><div>Any one Please help me on this isseu..<br><br><br><a href="http://san-sw1.subisu.net.np">san-sw1.subisu.net.np</a>: missed cmd(s): show running-config view full,write term,show <a href="http://running-configsan-sw1.subisu.net.np">running-configsan-sw1.subisu.net.np</a>: missed cmd(s): show running-config view full,write term,show running-config<br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sat, Jul 8, 2017 at 10:47 PM, Bipin Sharma <span dir="ltr"><<a href="mailto:bipinsharma091@gmail.com" target="_blank">bipinsharma091@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Hi there,
<br>
<br>
<br>I have configured rancid 2.3.8 and viewvc to view cvs file on my
enterprise network but while getting the configs it shows the error. i.e
<br>
<br>switch1.x.x.x: missed cmd(s): show chassis alarms,show chassis hardware
detail,show system license,show chassis scb,show chassis feb,show
chassis routing-engine,show chassis firmware,show version detail,show
chassis feb detail,show configuration,show system boot-messages,show
chassis cfeb,show chassis clocks,show chassis sfm detail,show chassis
ssb,show chassis fpc detail,show chassis environment,show system core-dumps
<br>switch1.x.x.x: End of run not found
<br>
<br>
<br>I even tried to rancid -d <switch-name> after that i get half
configuration i.e
<br>
<br>!RANCID-CONTENT-TYPE: cisco
<br>!
<br>!Chassis type: WS-C2960CPD-8PT-L - a 2900XL switch
<br>!CPU: PowerPC405
<br>!
<br>!Memory: main 131072K
<br>!Serial Number: FOC1745Y2SP
<br>!Model revision number : C0
<br>!Model number : WS-C2960CPD-8PT-L
<br>!Motherboard assembly number : 73-12988-06
<br>!Motherboard serial number : FOC17448QAT
<br>!Motherboard revision number : A0
<br>!
<br>!Processor ID: FOC1745Y2SP
<br>!
<br>!Power: Power Source Type Power(w) Mode
<br>!
<br>!Image: Software: C2960c405-UNIVERSALK9-M, 12.2(55)EX2, RELEASE SOFTWARE
(fc1)
<br>!Image: Compiled: Wed 18-May-11 13:53 by prod_rel_team
<br>!Image:
flash:/c2960c405-universalk9-<wbr>mz.122-55.EX2/c2960c405-<wbr>universalk9-mz.122-55.EX2.bin
<br>!
<br>!BOOTLDR: Version 12.2(55r)EX4, RELEASE SOFTWARE (fc1)
<br>!
<br>!
<br>!Variable: BOOT path-list :
flash:/c2960c405-universalk9-<wbr>mz.122-55.EX2/c2960c405-<wbr>universalk9-mz.122-55.EX2.bin
<br>!Variable: Config file : flash:/config.text
<br>!Variable: Private Config file : flash:/private-config.text
<br>!Variable: Enable Break : no
<br>!Variable: Manual Boot : no
<br>!Variable: HELPER path-list :
<br>!Variable: Auto upgrade : yes
<br>!Variable: Auto upgrade path :
<br>!Variable: NVRAM/Config file
<br>!Variable: buffer size: 65536
<br>!Variable: Timeout for Config
<br>!Variable: Download: 0 seconds
<br>!Variable: Config Download
<br>!Variable: via DHCP: disabled (next boot: disabled)
<br>!
<br>!Flash: Directory of flash:/
<br>!Flash: 4 -rwx 3576 Mar 9 1993 23:32:09 +00:00 config.text
<br>!Flash: 5 -rwx 1915 Mar 9 1993 23:32:09 +00:00
private-config.text
<br>!Flash: 6 drwx 512 Mar 1 1993 00:14:41 +00:00
c2960c405-universalk9-mz.122-<wbr>55.EX2
<br>!Flash: 59996160 bytes total (45029376 bytes free)
<br>!
<br>!Flash: nvram: Directory of nvram:/
<br>!Flash: nvram: 57 -rw- 3576 <no date>
startup-config
<br>!Flash: nvram: 58 ---- 1915 <no date>
private-config
<br>!Flash: nvram: 1 ---- 35 <no date>
persistent-data
<br>!Flash: nvram: 2 -rw- 0 <no date>
ifIndex-table
<br>!Flash: nvram: 3 -rw- 597 <no date>
IOS-Self-Sig#3838.cer
<br>!Flash: nvram: 65536 bytes total (56921 bytes free)
<br>!
<br>!
<br>!NAME: "1", DESCR: "WS-C2960CPD-8PT-L"
<br>!PID: WS-C2960CPD-8PT-L
<br>!VID: V01
<br>!SN: FOC1745Y2SP
<br>!NAME: "WS-C2960CPD-8PT-L - Sensor 0", DESCR: "WS-C2960CPD-8PT-L - Sensor 0"
<br>!NAME: "WS-C2960CPD-8PT-L - Fixed Module 0", DESCR: "WS-C2960CPD-8PT-L -
Fixed Module 0"
<br>!NAME: "FastEthernet0/1", DESCR: "FastEthernet0/1"
<br>!NAME: "FastEthernet0/2", DESCR: "FastEthernet0/2"
<br>!NAME: "FastEthernet0/3", DESCR: "FastEthernet0/3"
<br>!NAME: "FastEthernet0/4", DESCR: "FastEthernet0/4"
<br>!NAME: "FastEthernet0/5", DESCR: "FastEthernet0/5"
<br>!NAME: "FastEthernet0/6", DESCR: "FastEthernet0/6"
<br>!NAME: "FastEthernet0/7", DESCR: "FastEthernet0/7"
<br>!NAME: "FastEthernet0/8", DESCR: "FastEthernet0/8"
<br>!NAME: "GigabitEthernet0/1", DESCR: "GigabitEthernet0/1"
<br>!NAME: "GigabitEthernet0/2", DESCR: "GigabitEthernet0/2"
<br>!
<br>!VTP: VTP Version capable : 1 to 3
<br>!VTP: VTP version running : 1
<br>!VTP: VTP Domain Name :
<br>!VTP: VTP Pruning Mode : Disabled
<br>!VTP: VTP Traps Generation : Disabled
<br>!VTP: Device ID : 5ca4.8a5f.8980
<br>!VTP: Local updater ID is 172.22.8.76 on interface Vl63 (lowest numbered
VLAN interface found)
<br>!VTP: Feature VLAN:
<br>!VTP: --------------
<br>!VTP: VTP Operating Mode : Server
<br>!VTP: Maximum VLANs supported locally : 255
<br>!VTP: Number of existing VLANs : 7
<br>!VTP: Configuration Revision : 2
<br>!VTP: MD5 digest : 0x72 0xEB 0x10 0xEA 0x47 0x2B
0x07 0xE1
<br>!VTP: <wbr> 0x6A 0x8D 0xD2 0x9E 0x4A 0x99
0x42 0x5C
<br>!
<br>!VLAN: VLAN Name <wbr> Status Ports
<br>!VLAN: ---- ------------------------------<wbr>-- ---------
------------------------------<wbr>-
<br>!VLAN: 1 default <wbr> active Gi0/1, Gi0/2
<br>!VLAN: 63 ***mgmt_vlan*** <wbr> active Fa0/8
<br>!VLAN: 748 soalti_nas1_atarkhel <wbr> active Fa0/2, Fa0/3,
Fa0/4, Fa0/5, Fa0/6, Fa0/7
<br>!VLAN: 1002 fddi-default <wbr> act/unsup
<br>!VLAN: 1003 token-ring-default <wbr> act/unsup
<br>!VLAN: 1004 fddinet-default <wbr> act/unsup
<br>!VLAN: 1005 trnet-default <wbr> act/unsup
<br>!VLAN: VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode
Trans1 Trans2
<br>!VLAN: ---- ----- ---------- ----- ------ ------ -------- ---- --------
------ ------
<br>!VLAN: 1 enet 100001 1500 - - - - -
0 0
<br>!VLAN: 63 enet 100063 1500 - - - - -
0 0
<br>!VLAN: 748 enet 100748 1500 - - - - -
0 0
<br>!VLAN: 1002 fddi 101002 1500 - - - - -
0 0
<br>!VLAN: 1003 tr 101003 1500 - - - - -
0 0
<br>!VLAN: 1004 fdnet 101004 1500 - - - ieee -
0 0
<br>!VLAN: 1005 trnet 101005 1500 - - - ibm -
0 0
<br>!VLAN: Remote SPAN VLANs
<br>!VLAN:
------------------------------<wbr>------------------------------<wbr>------------------
<br>!VLAN: Primary Secondary Type Ports
<br>!VLAN: ------- --------- -----------------
------------------------------<wbr>------------
<br>!
<br>
<br>
<br>
<br>So Please help me to over come this error.. I have tried almost every
thing to fix this bug but i failed in every way.. Hope you guys would
help me and suggest me to work out..
<br>
<br><br></div>regards.<br>
</div>
</blockquote></div><br></div>