<html><body><p><font size="2" face="sans-serif">Hey Aaron,</font><br><br><font size="2" face="sans-serif">Sorry to keep bothering you - I am pulling my hair out trying to get this working!! I scrapped the mavvis version and installed the native version of tac_plus (tac_plus version F4.0.4.28) and authorization seems to fail for devices, here is my config. Do you see something amiss? I also tried getting 'do_auth' to work but that doesn't work either.</font><br><br><font size="2" face="sans-serif">Arista1#sh run | i aaa</font><br><font size="2" face="sans-serif">aaa group server tacacs+ CiscoACS</font><br><font size="2" face="sans-serif">aaa authentication login default group CiscoACS local</font><br><font size="2" face="sans-serif">aaa authorization exec default group CiscoACS none</font><br><font size="2" face="sans-serif">aaa authorization commands 0-14 default group CiscoACS local</font><br><font size="2" face="sans-serif">aaa authorization commands 15 default group CiscoACS none</font><br><font size="2" face="sans-serif">aaa accounting exec default start-stop group CiscoACS</font><br><font size="2" face="sans-serif">aaa accounting commands all default start-stop group CiscoACS</font><br><font size="2" face="sans-serif">no aaa root</font><br><font size="2" face="sans-serif">Arista1#</font><br><br><br><font size="2" face="sans-serif"> group = snm {</font><br><font size="2" face="sans-serif"> default service = deny</font><br><font size="2" face="sans-serif"> default</font><br><font size="2" face="sans-serif"> service = exec {</font><br><font size="2" face="sans-serif"> priv-lvl = 15</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = show {</font><br><font size="2" face="sans-serif"> permit ip</font><br><font size="2" face="sans-serif"> permit interface</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = configure {</font><br><font size="2" face="sans-serif"> deny .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = clear {</font><br><font size="2" face="sans-serif"> permit "counters"</font><br><font size="2" face="sans-serif"> permit "qos stat"</font><br><font size="2" face="sans-serif"> permit "mls qos int"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = disable {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = enable {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = end {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = exit {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = logout {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = ping {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = set {</font><br><font size="2" face="sans-serif"> permit "length 0"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = show {</font><br><font size="2" face="sans-serif"> deny "controllers vip"</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = skip-page-display {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = terminal {</font><br><font size="2" face="sans-serif"> permit "length 0"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = write {</font><br><font size="2" face="sans-serif"> permit "network"</font><br><font size="2" face="sans-serif"> permit "terminal"</font><br><font size="2" face="sans-serif"> permit "memory"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> }</font><br><br><br><br><font size="2" face="sans-serif">user = testuser {</font><br><font size="2" face="sans-serif"> login = PAM</font><br><font size="2" face="sans-serif"> member = snm</font><br><font size="2" face="sans-serif">}</font><br><br><br><font size="2" face="sans-serif">!!! router allows commands which should be denied !!</font><br><br><br><font size="2" face="sans-serif">Arista1 login: testuser </font><br><font size="2" face="sans-serif">Password:</font><br><font size="2" face="sans-serif">Last login: Thu Aug 6 16:12:19 on ttyS0</font><br><font size="2" face="sans-serif">Arista1>en</font><br><font size="2" face="sans-serif">Password:</font><br><font size="2" face="sans-serif">Arista1#configure terminal <-------- Should be denied</font><br><font size="2" face="sans-serif">Arista1(config)#interface ethernet 10 <----------- Should be denied </font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#shut <----------- Should be denied </font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#no shut <----------- Should be denied </font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#end</font><br><font size="2" face="sans-serif">Arista1#</font><br><br><br><br><font size="2" face="sans-serif">!!! SAME EXAMPLE WITH DO_AUTH </font><br><br><br><br><font size="2" face="sans-serif">group = snm {</font><br><font size="2" face="sans-serif"> default service = deny</font><br><font size="2" face="sans-serif"> default</font><br><font size="2" face="sans-serif"> service = exec {</font><br><font size="2" face="sans-serif"> priv-lvl = 15</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = show {</font><br><font size="2" face="sans-serif"> permit ip</font><br><font size="2" face="sans-serif"> permit interface</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = configure {</font><br><font size="2" face="sans-serif"> deny .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = clear {</font><br><font size="2" face="sans-serif"> permit "counters"</font><br><font size="2" face="sans-serif"> permit "qos stat"</font><br><font size="2" face="sans-serif"> permit "mls qos int"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = disable {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = enable {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = end {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = exit {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = logout {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = ping {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = set {</font><br><font size="2" face="sans-serif"> permit "length 0"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = show {</font><br><font size="2" face="sans-serif"> deny "controllers vip"</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = skip-page-display {</font><br><font size="2" face="sans-serif"> permit .*</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = terminal {</font><br><font size="2" face="sans-serif"> permit "length 0"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> cmd = write {</font><br><font size="2" face="sans-serif"> permit "network"</font><br><font size="2" face="sans-serif"> permit "terminal"</font><br><font size="2" face="sans-serif"> permit "memory"</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> after authorization "/usr/bin/python /usr/local/sbin/tacplus/do_auth.pyc -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini"</font><br><font size="2" face="sans-serif"> }</font><br><br><br><br><br><br><font size="2" face="sans-serif">Arista1 login: testuser</font><br><font size="2" face="sans-serif">Password:</font><br><font size="2" face="sans-serif">Last login: Thu Aug 6 16:14:44 on ttyS0</font><br><font size="2" face="sans-serif">Arista1>en</font><br><font size="2" face="sans-serif">Password:</font><br><font size="2" face="sans-serif">Arista1#configure terminal <-------- Should be denied</font><br><font size="2" face="sans-serif">Arista1(config)#interface ethernet 10 <-------- Should be denied</font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#shut <-------- Should be denied</font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#no shut</font><br><font size="2" face="sans-serif">Arista1(config-if-Et10)#end</font><br><font size="2" face="sans-serif">Arista1#</font><br><br><br><font size="2" face="sans-serif">!! When i run the debug to do_auth it just hangs at prompt, meaning it does not run then hand back the prompt:</font><br><br><font size="2" face="sans-serif">tac01 tacplus $ sudo /usr/bin/python2 /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini -D</font><br><br><font size="2" face="sans-serif">this is what i would expect:</font><br><br><font size="2" face="sans-serif">tac01 tacplus $ sudo /usr/bin/python2 /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini -D</font><br><font size="2" face="sans-serif">tac01 tacplus $ </font><br><br><font size="2" face="sans-serif"><br>!! do_auth.ini</font><br><br><font size="2" face="sans-serif">tac01 tacplus $ cat do_auth.ini</font><br><font size="2" face="sans-serif">[users]</font><br><font size="2" face="sans-serif">kcruse =</font><br><font size="2" face="sans-serif"> snm</font><br><font size="2" face="sans-serif">[snm]</font><br><font size="2" face="sans-serif">command_deny =</font><br><font size="2" face="sans-serif"> configure .*</font><br><font size="2" face="sans-serif"> terminal .*</font><br><font size="2" face="sans-serif"> interface .*</font><br><font size="2" face="sans-serif"> shutdown .*</font><br><font size="2" face="sans-serif">command_permit =</font><br><font size="2" face="sans-serif"> show.*</font><br><font size="2" face="sans-serif">hcvmtac01 tacplus $</font><br><br><img width="16" height="16" src="cid:1__=0ABBF40ADFC472868f9e@AMERICAS.CORP.LOCAL" border="0" alt="Inactive hide details for Aaron Wasserott ---07/22/2015 03:28:27 PM---Kevin, I just tested this and it works for me. User can r"><font size="2" color="#424282" face="sans-serif">Aaron Wasserott ---07/22/2015 03:28:27 PM---Kevin, I just tested this and it works for me. User can run show commands, but not enter conf t mode</font><br><br><font size="1" color="#5F5F5F" face="sans-serif">From: </font><font size="1" face="sans-serif">Aaron Wasserott <aaron.wasserott@viawest.com></font><br><font size="1" color="#5F5F5F" face="sans-serif">To: </font><font size="1" face="sans-serif">"Kevin.Cruse@Instinet.com" <Kevin.Cruse@Instinet.com>, </font><br><font size="1" color="#5F5F5F" face="sans-serif">Cc: </font><font size="1" face="sans-serif">"tac_plus@shrubbery.net" <tac_plus@shrubbery.net></font><br><font size="1" color="#5F5F5F" face="sans-serif">Date: </font><font size="1" face="sans-serif">07/22/2015 03:28 PM</font><br><font size="1" color="#5F5F5F" face="sans-serif">Subject: </font><font size="1" face="sans-serif">RE: [tac_plus] Cisco Nexus Authorization problem</font><br><hr width="100%" size="2" align="left" noshade style="color:#8091A5; "><br><br><br><font size="2" color="#1F497D" face="Calibri">Kevin,</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri">I just tested this and it works for me. User can run show commands, but not enter conf t mode. </font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri">Arista DCS-7050S-52-R running code 4.8.3. In production we run do_auth. It comes bundled with the latest version of tac_plus and makes tweaking authorization a lot easier. It’s more scalable, syntax is cleaner, and it has its own authorization logs which are easier to read.</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri"># tac_plus.conf</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri">group = tier1 {</font><br><font size="2" color="#1F497D" face="Calibri"> default service = permit</font><br><font size="2" color="#1F497D" face="Calibri"> login = PAM</font><br><font size="2" color="#1F497D" face="Calibri"> pap = PAM</font><br><font size="2" color="#1F497D" face="Calibri"> default command = deny</font><br><font size="2" color="#1F497D" face="Calibri"> cmd = show {permit .*}</font><br><font size="2" color="#1F497D" face="Calibri"> service = exec {</font><br><font size="2" color="#1F497D" face="Calibri"> priv-lvl = 15</font><br><font size="2" color="#1F497D" face="Calibri"> }</font><br><font size="2" color="#1F497D" face="Calibri"> service = raccess {</font><br><font size="2" color="#1F497D" face="Calibri"> priv-lvl = 0</font><br><font size="2" color="#1F497D" face="Calibri"> }</font><br><font size="2" color="#1F497D" face="Calibri">}</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri">user = first.last {</font><br><font size="2" color="#1F497D" face="Calibri"> member = tier1</font><br><font size="2" color="#1F497D" face="Calibri">}</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri"># switch AAA commands</font><br><font size="2" color="#1F497D" face="Calibri">aaa group server tacacs+ TacGroup</font><br><font size="2" color="#1F497D" face="Calibri">aaa authentication login default group TacGroup local</font><br><font size="2" color="#1F497D" face="Calibri">aaa authorization exec default group TacGroup none</font><br><font size="2" color="#1F497D" face="Calibri">aaa authorization commands 15 default group TacGroup none</font><br><font size="2" color="#1F497D" face="Calibri">aaa accounting exec default start-stop group TacGroup</font><br><font size="2" color="#1F497D" face="Calibri">aaa accounting commands 15 default start-stop group TacGroup</font><br><font size="2" color="#1F497D" face="Calibri">no aaa root</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" color="#1F497D" face="Calibri">-Aaron</font><br><font size="2" color="#1F497D" face="Calibri"> </font><br><font size="2" face="Tahoma"><b>From:</b></font><font size="2" face="Tahoma"> Kevin.Cruse@Instinet.com [</font><font size="2" face="Tahoma"><a href="mailto:Kevin.Cruse@Instinet.com">mailto:Kevin.Cruse@Instinet.com</a></font><font size="2" face="Tahoma">] </font><font size="2" face="Tahoma"><b><br>Sent:</b></font><font size="2" face="Tahoma"> Wednesday, July 22, 2015 12:44 PM</font><font size="2" face="Tahoma"><b><br>To:</b></font><font size="2" face="Tahoma"> Aaron Wasserott</font><font size="2" face="Tahoma"><b><br>Cc:</b></font><font size="2" face="Tahoma"> tac_plus@shrubbery.net</font><font size="2" face="Tahoma"><b><br>Subject:</b></font><font size="2" face="Tahoma"> RE: [tac_plus] Cisco Nexus Authorization problem</font><br><font size="3" face="Times New Roman"> </font><p><font size="2" face="Arial">Aaron</font><font size="3" face="Times New Roman"><br></font><font size="2" face="Arial"><br>Do you have experience with Arista? It seems I am having similar problem with this device. Authentication works fine, but once i login and send enable password I can run any command i'd like. It's not restricting access to my preconfigured commands:</font><font size="3" face="Times New Roman"><br><br></font><font size="2" face="Arial"><br>Arista1#sh run | i aaa<br>aaa group server tacacs+ CiscoACS<br>aaa authentication login default group CiscoACS local<br>aaa authorization exec default group CiscoACS local<br>aaa authorization commands all default group CiscoACS local<br>aaa accounting exec default start-stop group CiscoACS<br>aaa accounting commands all default start-stop group CiscoACS<br>no aaa root</font><font size="3" face="Times New Roman"><br></font><font size="2" face="Arial"><br>----- </font><font size="3" face="Times New Roman"><br></font><font size="2" face="Arial"><br> user = testuser {<br> login = clear "test123"<br> pap = clear "test123"<br> member = snm<br> }</font><font size="3" face="Times New Roman"><br><br></font><font size="2" face="Arial"><br> group = snm {<br> default service = deny<br> service = shell {<br> set shell:roles="\"network-admin\""<br> default command = deny<br> default attribute = deny<br> set priv-lvl = 15<br> cmd = configure {deny .*}<br> cmd = clear {<br> permit "counters"<br> permit "qos stat"<br> permit "mls qos int"<br> }<br> cmd = disable {permit .*}<br> cmd = enable {permit .*}<br> cmd = end {permit .*}<br> cmd = exit {permit .*}<br> cmd = logout {permit .*}<br> cmd = ping {permit .*}<br> cmd = set {<br> permit "length 0"<br> }<br> cmd = show {<br> deny "controllers vip"<br> permit .*<br> }<br> cmd = skip-page-display {permit .*}<br> cmd = terminal {<br> permit "length 0"<br> }<br> cmd = write {<br> permit "network"<br> permit "terminal"<br> permit "memory"<br> }<br> }<br> }</font><font size="3" face="Times New Roman"><br></font><font size="2" face="Arial"><br>----</font><font size="3" face="Times New Roman"><br><br></font><font size="2" face="Arial"><br>Arista1 login: testuser<br>Password:<br>Last login: Wed Jul 22 18:49:42 on ttyS0<br>Arista1>en<br>Password:<br>Arista1#conf t <--- This command should be restricted<br>Arista1(config)#interface eth 10 <--- This command should be restricted<br>Arista1(config-if-Et10)#shut <--- This command should be restricted<br>Arista1(config-if-Et10)#end<br>Arista1#exit</font><font size="3" face="Times New Roman"><br><br><br><br></font><img src="cid:1__=0ABBF40ADFC472868f9e@AMERICAS.CORP.LOCAL" width="16" height="16" alt="Inactive hide details for Aaron Wasserott ---07/16/2015 09:26:32 PM---Try changing "service = shell" to "service = exec" and se"><font size="2" color="#424282" face="Arial">Aaron Wasserott ---07/16/2015 09:26:32 PM---Try changing "service = shell" to "service = exec" and see if that works. I have NX-OS working fine</font><font size="3" face="Times New Roman"><br></font><font size="1" color="#5F5F5F" face="Arial"><br>From: </font><font size="1" face="Arial">Aaron Wasserott <</font><a href="mailto:aaron.wasserott@viawest.com"><font size="1" color="#0000FF" face="Arial"><u>aaron.wasserott@viawest.com</u></font></a><font size="1" face="Arial">></font><font size="1" color="#5F5F5F" face="Arial"><br>To: </font><font size="1" face="Arial">"</font><a href="mailto:Kevin.Cruse@Instinet.com"><font size="1" color="#0000FF" face="Arial"><u>Kevin.Cruse@Instinet.com</u></font></a><font size="1" face="Arial">" <</font><a href="mailto:Kevin.Cruse@Instinet.com"><font size="1" color="#0000FF" face="Arial"><u>Kevin.Cruse@Instinet.com</u></font></a><font size="1" face="Arial">>, "</font><a href="mailto:tac_plus@shrubbery.net"><font size="1" color="#0000FF" face="Arial"><u>tac_plus@shrubbery.net</u></font></a><font size="1" face="Arial">" <</font><a href="mailto:tac_plus@shrubbery.net"><font size="1" color="#0000FF" face="Arial"><u>tac_plus@shrubbery.net</u></font></a><font size="1" face="Arial">>, </font><font size="1" color="#5F5F5F" face="Arial"><br>Date: </font><font size="1" face="Arial">07/16/2015 09:26 PM</font><font size="1" color="#5F5F5F" face="Arial"><br>Subject: </font><font size="1" face="Arial">RE: [tac_plus] Cisco Nexus Authorization problem</font><br><hr width="100%" size="2" align="left" noshade><br><font size="3" face="Times New Roman"><br><br></font><font size="2" face="Courier New"><br>Try changing "service = shell" to "service = exec" and see if that works. I have NX-OS working fine using that. Also, I have never seen the shell service used in real-world examples for network devices. But reading the manpage it appears it should work to prevent them from entering configuration mode, as long as your AAA commands are set right.<br><br>service=shell<br>for exec startup, and also for command authorizations. Requires: aaa authorization exec tacacs+<br><br>Whether authorization happens, and at which prompt level, depends on the aaa authorization settings. It's possible to only restrict exec level commands, and prevent them from entering the 'conf t' command. But if you want them in conf t mode but restrict their commands at that level, you need to enable something like this:<br><br>aaa authorization config-commands default group myTacacsGroup local<br><br>If changing the service doesn't work, include the AAA commands on your NX-OS switches.<br><br>-----Original Message-----<br>From: tac_plus [</font><a href="mailto:tac_plus-bounces@shrubbery.net"><font size="2" color="#0000FF" face="Courier New"><u>mailto:tac_plus-bounces@shrubbery.net</u></font></a><font size="2" face="Courier New">] On Behalf Of </font><a href="mailto:Kevin.Cruse@Instinet.com"><font size="2" color="#0000FF" face="Courier New"><u>Kevin.Cruse@Instinet.com</u></font></a><font size="2" face="Courier New"><br>Sent: Thursday, July 16, 2015 3:40 PM<br>To: </font><a href="mailto:tac_plus@shrubbery.net"><font size="2" color="#0000FF" face="Courier New"><u>tac_plus@shrubbery.net</u></font></a><font size="2" face="Courier New"><br>Subject: [tac_plus] Cisco Nexus Authorization problem<br><br><br><br>Hello<br><br>I have configured TACPLUS to work with cisco nexus device. I am able to successfully authenticate, however, I am able to run all commands on router. It seems the router is not restricted to the commands specified in my group config. Has anyone gotten Cisco nexus to work properly with tacplus? I need to limit certain users and cannot get this working properly. Any help is greatly appreciated!!! Thanks.<br><br>Group Config:<br><br> group = snm {<br> default service = deny<br> service = shell {<br> set shell:roles="\"network-admin\""<br> default command = deny<br> default attribute = deny<br> set priv-lvl = 15<br> cmd = configure {deny .*}<br> cmd = clear {<br> permit "counters"<br> permit "qos stat"<br> permit "mls qos int"<br> }<br> cmd = disable {permit .*}<br> cmd = enable {permit .*}<br> cmd = end {permit .*}<br> cmd = exit {permit .*}<br> cmd = logout {permit .*}<br> cmd = ping {permit .*}<br> cmd = set {<br> permit "length 0"<br> }<br> cmd = show {<br> deny "controllers vip"<br> permit .*<br> }<br> cmd = skip-page-display {permit .*}<br> cmd = terminal {<br> permit "length 0"<br> }<br> cmd = write {<br> permit "network"<br> permit "terminal"<br> permit "memory"<br> }<br> }<br> }<br><br><br> user = testuser {<br><br> member = snm<br> }<br><br><br>Session output from router:<br><br>telnet labrouter<br>Trying labrouter...<br>Connected to labrouter.<br>Escape character is '^]'.<br>User Access Verification<br>login: testuser<br>Password:<br>Cisco Nexus Operating System (NX-OS) Software TAC support: </font><a href="http://www.cisco.com/tac"><font size="2" color="#0000FF" face="Courier New"><u>http://www.cisco.com/tac</u></font></a><font size="2" face="Courier New"> Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.<br>The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at </font><a href="http://www.opensource.org/licenses/gpl-2.0.php"><font size="2" color="#0000FF" face="Courier New"><u>http://www.opensource.org/licenses/gpl-2.0.php</u></font></a><font size="2" face="Courier New"> and </font><a href="http://www.opensource.org/licenses/lgpl-2.1.php"><font size="2" color="#0000FF" face="Courier New"><u>http://www.opensource.org/licenses/lgpl-2.1.php</u></font></a><font size="2" face="Courier New"><br>LABROUTER# configure<br><------------------------------------------------------------ This should be denied Enter configuration commands, one per line. End with CNTL/Z.<br>LABROUTER(config)# interface ethernet 1/1 configure<br><------------------------------------------------------------ This should be denied LABROUTER(config-if)# shut<br><------------------------------------------------------------ This should be denied LABROUTER(config-if)# no shut<br><------------------------------------------------------------ This should be denied LABROUTER(config-if)# end LABROUTER#<br><br>========================================================================================================= <<<< Disclaimer >>>> This message is intended solely for use by the named addressee(s). If you receive this transmission in error, please immediately notify the sender and destroy this message in its entirety, whether in electronic or hard copy format. Any unauthorized use (and reliance thereon), copying, disclosure, retention, or distribution of this transmission or the material in this transmission is forbidden. We reserve the right to monitor and archive electronic communications. This material does not constitute an offer or solicitation with respect to the purchase or sale of any security. It should not be construed to contain any recommendation regarding any security or strategy. Any views expressed are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. This communication is provided on an “as is” basis. It contains material that is owned by Instinet Incorporated, its subsidiaries or its or their licensors, and may not, in whole or in part, be (i) copied, photocopied or duplicated in any form, by any means, or (ii) redistributed, posted, published, excerpted, or quoted without Instinet Incorporated's prior written consent. Please access the following link for important information and instructions: </font><a href="http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt"><font size="2" color="#0000FF" face="Courier New"><u>http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt</u></font></a><font size="2" face="Courier New"> Securities products and services are provided by locally registered brokerage subsidiaries of Instinet Incorporated: Instinet Australia Pty Limited (ACN: 131 253 686 AFSL No: 327834), regulated by the Australian Securities & Investments Commission; Instinet Canada Limited, member IIROC/CIPF; Instinet Pacific Limited, authorized and regulated by the Securities and Futures Commission of Hong Kong; Instinet Singapore Services Private Limited, regulated by the Monetary Authority of Singapore, trading member of The Singapore Exchange Securities Trading Private Limited and clearing member of The Central Depository (Pte) Limited; and Instinet, LLC, member SIPC.<br><br>=========================================================================================================<br>-------------- next part --------------<br>An HTML attachment was scrubbed...<br>URL: <</font><a href="http://www.shrubbery.net/pipermail/tac_plus/attachments/20150716/5c309608/attachment.html"><font size="2" color="#0000FF" face="Courier New"><u>http://www.shrubbery.net/pipermail/tac_plus/attachments/20150716/5c309608/attachment.html</u></font></a><font size="2" face="Courier New">><br>_______________________________________________<br>tac_plus mailing list</font><font size="2" color="#0000FF" face="Courier New"><u><br></u></font><a href="mailto:tac_plus@shrubbery.net"><font size="2" color="#0000FF" face="Courier New"><u>tac_plus@shrubbery.net</u></font></a><font size="2" color="#0000FF" face="Courier New"><u><br></u></font><a href="http://www.shrubbery.net/mailman/listinfo/tac_plus"><font size="2" color="#0000FF" face="Courier New"><u>http://www.shrubbery.net/mailman/listinfo/tac_plus</u></font></a><font size="2" face="Courier New"><br>This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message.</font><br><font size="1" face="Georgia"><i><br><br>========================================================================================================= </i></font><p><font size="1" face="Georgia"><b><i><<<< Disclaimer >>>></i></b></font><font size="1" face="Georgia"><i> </i></font><p><font size="1" face="Georgia"><i>This message is intended solely for use by the named addressee(s). If you receive this transmission in error, please immediately notify the sender and destroy this message in its entirety, whether in electronic or hard copy format. Any unauthorized use (and reliance thereon), copying, disclosure, retention, or distribution of this transmission or the material in this transmission is forbidden. We reserve the right to monitor and archive electronic communications. This material does not constitute an offer or solicitation with respect to the purchase or sale of any security. It should not be construed to contain any recommendation regarding any security or strategy. Any views expressed are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. This communication is provided on an “as is” basis. It contains material that is owned by Instinet Incorporated, its subsidiaries or its or their licensors, and may not, in whole or in part, be (i) copied, photocopied or duplicated in any form, by any means, or (ii) redistributed, posted, published, excerpted, or quoted without Instinet Incorporated's prior written consent. Please access the following link for important information and instructions: </i></font><a href="%20http:/instinet.com/includes/index.jsp?thePage=/html/le_index.txt"><font size="1" color="#0000FF" face="Georgia"><i><u>http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt</u></i></font></a><font size="1" face="Georgia"><i> </i></font><p><font size="1" face="Georgia"><i>Securities products and services are provided by locally registered brokerage subsidiaries of Instinet Incorporated: Instinet Australia Pty Limited (ACN: 131 253 686 AFSL No: 327834), regulated by the Australian Securities & Investments Commission; Instinet Canada Limited, member IIROC/CIPF; Instinet Pacific Limited, authorized and regulated by the Securities and Futures Commission of Hong Kong; Instinet Singapore Services Private Limited, regulated by the Monetary Authority of Singapore, trading member of The Singapore Exchange Securities Trading Private Limited and clearing member of The Central Depository (Pte) Limited; and Instinet, LLC, member SIPC. </i></font><p><font size="1" face="Georgia"><i><br><br>========================================================================================================= </i></font><p><font size="3" face="serif">This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message. </font><p><font face="sans-serif"><div style="font-size:12px; font-style:italic; font-family:georgia,arial,sans-serif">
<br><br>
=========================================================================================================
<div style="font-size:12px; font-style:italic; font-family:georgia,arial,sans-serif">
<p>
<B><<<< Disclaimer >>>></B>
<p>
This message is intended solely for use by the named addressee(s). If you receive this transmission in error, please immediately notify the sender and destroy this message in its entirety, whether in electronic or hard copy format. Any unauthorized use (and reliance thereon), copying, disclosure, retention, or distribution of this transmission or the material in this transmission is forbidden. We reserve the right to monitor and archive electronic communications. This material does not constitute an offer or solicitation with respect to the purchase or sale of any security. It should not be construed to contain any recommendation regarding any security or strategy. Any views expressed are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. This communication is provided on an “as is” basis. It contains material that is owned by Instinet Incorporated, its subsidiaries or its or their licensors, and may not, in whole or in part, be (i) copied, photocopied or duplicated in any form, by any means, or (ii) redistributed, posted, published, excerpted, or quoted without Instinet Incorporated's prior written consent. Please access the following link for important information and instructions: <a href=" http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt"> http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt</a>
<p>
Securities products and services are provided by locally registered brokerage subsidiaries of Instinet Incorporated: Instinet Australia Pty Limited (ACN: 131 253 686 AFSL No: 327834), regulated by the Australian Securities & Investments Commission; Instinet Canada Limited, member IIROC/CIPF; Instinet Pacific Limited, authorized and regulated by the Securities and Futures Commission of Hong Kong; Instinet Singapore Services Private Limited, regulated by the Monetary Authority of Singapore, trading member of The Singapore Exchange Securities Trading Private Limited and clearing member of The Central Depository (Pte) Limited; and Instinet, LLC, member SIPC.
<p>
<br><br>
=========================================================================================================
</div></font>
</body></html>