<html><body><p><font size="2" face="sans-serif">I am having a strange issue where cisco devices are being authorized by do_auth properly, however, arista devices are not. The arista device is sending command to tacplus but daemont does not send command to do_auth. I can confirm since there is no update to do_auth log when sending commands from arista. any ideas? Everything seems to be working fine except arista, this is my last hurdle! </font><br><br><br><font size="2" face="sans-serif">CISCO</font><br><br><font size="2" face="sans-serif">connect from test.router.com [10.11.128.30]</font><br><font size="2" face="sans-serif">Waiting for packet</font><br><font size="2" face="sans-serif">Read ACCT size=137</font><br><font size="2" face="sans-serif">validation request from test.router.com</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 1, flags 0x1</font><br><font size="2" face="sans-serif">session_id 677254324 (0x285e14b4), Data length 125 (0x7d)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT, flags=0x4 method=6 priv_lvl=1</font><br><font size="2" face="sans-serif">type=1 svc=1</font><br><font size="2" face="sans-serif">user_len=6 port_len=6 rem_addr_len=14</font><br><font size="2" face="sans-serif">arg_cnt=6</font><br><font size="2" face="sans-serif">User:</font><br><font size="2" face="sans-serif">testuser</font><br><font size="2" face="sans-serif">port:</font><br><font size="2" face="sans-serif">tty130</font><br><font size="2" face="sans-serif">rem_addr:</font><br><font size="2" face="sans-serif">10.12.144.108</font><br><font size="2" face="sans-serif">arg[0]: size=13</font><br><font size="2" face="sans-serif">task_id=41325</font><br><font size="2" face="sans-serif">arg[1]: size=12</font><br><font size="2" face="sans-serif">timezone=EDT</font><br><font size="2" face="sans-serif">arg[2]: size=13</font><br><font size="2" face="sans-serif">service=shell</font><br><font size="2" face="sans-serif">arg[3]: size=21</font><br><font size="2" face="sans-serif">start_time=1439827839</font><br><font size="2" face="sans-serif">arg[4]: size=10</font><br><font size="2" face="sans-serif">priv-lvl=0</font><br><font size="2" face="sans-serif">arg[5]: size=15</font><br><font size="2" face="sans-serif">cmd=enable <cr></font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Writing ACCT size=17</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 2, flags 0x1</font><br><font size="2" face="sans-serif">session_id 677254324 (0x285e14b4), Data length 5 (0x5)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT/REPLY status=1</font><br><font size="2" face="sans-serif">msg_len=0 data_len=0</font><br><font size="2" face="sans-serif">msg:</font><br><font size="2" face="sans-serif">data:</font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">test.router.com: disconnect</font><br><br><br><font size="2" face="sans-serif">session request from test.router.com sock=5</font><br><font size="2" face="sans-serif">connect from test.router.com [10.11.128.30]</font><br><font size="2" face="sans-serif">Waiting for packet</font><br><font size="2" face="sans-serif">Read AUTHOR size=104</font><br><font size="2" face="sans-serif">validation request from test.router.com</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 2, seq no 1, flags 0x1</font><br><font size="2" face="sans-serif">session_id 4255328848 (0xfda32a50), Data length 92 (0x5c)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">type=AUTHOR, priv_lvl=15, authen=1</font><br><font size="2" face="sans-serif">method=none</font><br><font size="2" face="sans-serif">svc=0 user_len=6 port_len=6 rem_addr_len=14</font><br><font size="2" face="sans-serif">arg_cnt=4</font><br><font size="2" face="sans-serif">User:</font><br><font size="2" face="sans-serif">testuser</font><br><font size="2" face="sans-serif">port:</font><br><font size="2" face="sans-serif">tty130</font><br><font size="2" face="sans-serif">rem_addr:</font><br><font size="2" face="sans-serif">10.12.144.108</font><br><font size="2" face="sans-serif">arg[0]: size=13</font><br><font size="2" face="sans-serif">service=shell</font><br><font size="2" face="sans-serif">arg[1]: size=13</font><br><font size="2" face="sans-serif">cmd=configure</font><br><font size="2" face="sans-serif">arg[2]: size=16</font><br><font size="2" face="sans-serif">cmd-arg=terminal</font><br><font size="2" face="sans-serif">arg[3]: size=12</font><br><font size="2" face="sans-serif">cmd-arg=<cr></font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Writing AUTHOR/FAIL size=18</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 2, seq no 2, flags 0x1</font><br><font size="2" face="sans-serif">session_id 4255328848 (0xfda32a50), Data length 6 (0x6)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">type=AUTHOR/REPLY status=16 (AUTHOR/FAIL)</font><br><font size="2" face="sans-serif">msg_len=0, data_len=0 arg_cnt=0</font><br><font size="2" face="sans-serif">msg:</font><br><font size="2" face="sans-serif">data:</font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">authorization query for 'testuser' tty130 from test.router.com rejected</font><br><font size="2" face="sans-serif">test.router.com: disconnect</font><br><br><br><font size="2" face="sans-serif">ARISTA</font><br><br><font size="2" face="sans-serif">connect from Aristalab-1.router.com [10.15.10.18]</font><br><font size="2" face="sans-serif">Waiting for packet</font><br><font size="2" face="sans-serif">Read ACCT size=119</font><br><font size="2" face="sans-serif">validation request from Aristalab-1.router.com</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 1, flags 0x1</font><br><font size="2" face="sans-serif">session_id 1744489531 (0x67facc3b), Data length 107 (0x6b)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT, flags=0x4 method=6 priv_lvl=1</font><br><font size="2" face="sans-serif">type=1 svc=1</font><br><font size="2" face="sans-serif">user_len=6 port_len=5 rem_addr_len=0</font><br><font size="2" face="sans-serif">arg_cnt=6</font><br><font size="2" face="sans-serif">User:</font><br><font size="2" face="sans-serif">testuser</font><br><font size="2" face="sans-serif">port:</font><br><font size="2" face="sans-serif">ttyS0</font><br><font size="2" face="sans-serif">rem_addr:</font><br><font size="2" face="sans-serif">arg[0]: size=10</font><br><font size="2" face="sans-serif">task_id=22</font><br><font size="2" face="sans-serif">arg[1]: size=13</font><br><font size="2" face="sans-serif">service=shell</font><br><font size="2" face="sans-serif">arg[2]: size=10</font><br><font size="2" face="sans-serif">priv-lvl=1</font><br><font size="2" face="sans-serif">arg[3]: size=21</font><br><font size="2" face="sans-serif">start_time=1439828055</font><br><font size="2" face="sans-serif">arg[4]: size=12</font><br><font size="2" face="sans-serif">timezone=UTC</font><br><font size="2" face="sans-serif">arg[5]: size=15</font><br><font size="2" face="sans-serif">cmd=enable <cr></font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Writing ACCT size=17</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 2, flags 0x1</font><br><font size="2" face="sans-serif">session_id 1744489531 (0x67facc3b), Data length 5 (0x5)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT/REPLY status=1</font><br><font size="2" face="sans-serif">msg_len=0 data_len=0</font><br><font size="2" face="sans-serif">msg:</font><br><font size="2" face="sans-serif">data:</font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Aristalab-1.router.com: disconnect</font><br><br><br><font size="2" face="sans-serif">session request from Aristalab-1.router.com sock=5</font><br><font size="2" face="sans-serif">connect from Aristalab-1.router.com [10.15.10.18]</font><br><font size="2" face="sans-serif">Waiting for packet</font><br><font size="2" face="sans-serif">Read ACCT size=132</font><br><font size="2" face="sans-serif">validation request from Aristalab-1.router.com</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 1, flags 0x1</font><br><font size="2" face="sans-serif">session_id 1288212585 (0x4cc89069), Data length 120 (0x78)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT, flags=0x4 method=6 priv_lvl=15</font><br><font size="2" face="sans-serif">type=1 svc=1</font><br><font size="2" face="sans-serif">user_len=6 port_len=5 rem_addr_len=0</font><br><font size="2" face="sans-serif">arg_cnt=6</font><br><font size="2" face="sans-serif">User:</font><br><font size="2" face="sans-serif">testuser</font><br><font size="2" face="sans-serif">port:</font><br><font size="2" face="sans-serif">ttyS0</font><br><font size="2" face="sans-serif">rem_addr:</font><br><font size="2" face="sans-serif">arg[0]: size=10</font><br><font size="2" face="sans-serif">task_id=23</font><br><font size="2" face="sans-serif">arg[1]: size=13</font><br><font size="2" face="sans-serif">service=shell</font><br><font size="2" face="sans-serif">arg[2]: size=11</font><br><font size="2" face="sans-serif">priv-lvl=15</font><br><font size="2" face="sans-serif">arg[3]: size=21</font><br><font size="2" face="sans-serif">start_time=1439828061</font><br><font size="2" face="sans-serif">arg[4]: size=12</font><br><font size="2" face="sans-serif">timezone=UTC</font><br><font size="2" face="sans-serif">arg[5]: size=27</font><br><font size="2" face="sans-serif">cmd=configure terminal <cr></font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Writing ACCT size=17</font><br><font size="2" face="sans-serif">PACKET: key=password</font><br><font size="2" face="sans-serif">version 192 (0xc0), type 3, seq no 2, flags 0x1</font><br><font size="2" face="sans-serif">session_id 1288212585 (0x4cc89069), Data length 5 (0x5)</font><br><font size="2" face="sans-serif">End header</font><br><font size="2" face="sans-serif">ACCT/REPLY status=1</font><br><font size="2" face="sans-serif">msg_len=0 data_len=0</font><br><font size="2" face="sans-serif">msg:</font><br><font size="2" face="sans-serif">data:</font><br><font size="2" face="sans-serif">End packet</font><br><font size="2" face="sans-serif">Aristalab-1.router.com: disconnect</font><br><br><br><font size="2" face="sans-serif">tac_plus.cfg:</font><br><br><br><font size="2" face="sans-serif"> group = snm {</font><br><font size="2" face="sans-serif"> default service = permit</font><br><font size="2" face="sans-serif"> service = exec {</font><br><font size="2" face="sans-serif"> priv-lvl = 15</font><br><font size="2" face="sans-serif"> }</font><br><font size="2" face="sans-serif"> after authorization "/usr/bin/python /usr/local/sbin/tacplus/do_auth.py -i $address -fix_crs_bug -u $user -d $name -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini"</font><br><br><font size="2" face="sans-serif"> }</font><br><br><br><br><font size="2" face="sans-serif">do_auth.ini:</font><br><br><br><font size="2" face="sans-serif">[snm]</font><br><font size="2" face="sans-serif">host_allow =</font><br><font size="2" face="sans-serif"> .*</font><br><font size="2" face="sans-serif">device_permit =</font><br><font size="2" face="sans-serif"> .*</font><br><font size="2" face="sans-serif">command_deny =</font><br><font size="2" face="sans-serif"> configure.*</font><br><font size="2" face="sans-serif"> show controllers vip.*</font><br><font size="2" face="sans-serif">command_permit =</font><br><font size="2" face="sans-serif"> show ip.*</font><br><font size="2" face="sans-serif"> show interface.*</font><br><font size="2" face="sans-serif"> clear counters.*</font><br><font size="2" face="sans-serif"> clear qos stat.*</font><br><font size="2" face="sans-serif"> clear mls qos int.*</font><br><font size="2" face="sans-serif"> disable.*</font><br><font size="2" face="sans-serif"> enable.*</font><br><font size="2" face="sans-serif"> end.*</font><br><font size="2" face="sans-serif"> exit.*</font><br><font size="2" face="sans-serif"> logout.*</font><br><font size="2" face="sans-serif"> ping.*</font><br><font size="2" face="sans-serif"> set length.*</font><br><font size="2" face="sans-serif"> show.*</font><br><font size="2" face="sans-serif"> skip-page-display.*</font><br><font size="2" face="sans-serif"> write network.*</font><br><font size="2" face="sans-serif"> write terminal.*</font><br><font size="2" face="sans-serif"> write memory.*</font><br><font size="2" face="sans-serif"> terminal length.*</font><br><br><br><br><br><br><img width="16" height="16" src="cid:1__=0ABBF437DFCAABBF8f9e@AMERICAS.CORP.LOCAL" border="0" alt="Inactive hide details for John Fraizer ---08/07/2015 12:54:36 PM---Here is one problem: *cmd exit does not exist, denied by def"><font size="2" color="#424282" face="sans-serif">John Fraizer ---08/07/2015 12:54:36 PM---Here is one problem: *cmd exit does not exist, denied by default*</font><br><br><font size="1" color="#5F5F5F" face="sans-serif">From: </font><font size="1" face="sans-serif">John Fraizer <john@op-sec.us></font><br><font size="1" color="#5F5F5F" face="sans-serif">To: </font><font size="1" face="sans-serif">"Kevin.Cruse@Instinet.com" <Kevin.Cruse@instinet.com>, </font><br><font size="1" color="#5F5F5F" face="sans-serif">Cc: </font><font size="1" face="sans-serif">Daniel Schmidt <daniel.schmidt@wyo.gov>, "tac_plus@shrubbery.net" <tac_plus@shrubbery.net></font><br><font size="1" color="#5F5F5F" face="sans-serif">Date: </font><font size="1" face="sans-serif">08/07/2015 12:54 PM</font><br><font size="1" color="#5F5F5F" face="sans-serif">Subject: </font><font size="1" face="sans-serif">Re: [tac_plus] Cisco Nexus Authorization problem</font><br><hr width="100%" size="2" align="left" noshade style="color:#8091A5; "><br><br><br><font size="3" face="serif">Here is one problem:</font><br><br><font size="3" face="serif"><b>cmd exit does not exist, denied by default</b></font><br><br><font size="3" face="serif">It looks like you've got default service = deny in your tac_plus.conf. To use do_auth, you need default service = permit.</font><br><br><font size="3" face="serif">Your after auth line doesn't look right either.</font><br><br><font size="3" face="serif"><b>/usr/bin/python /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini</b></font><br><br><font size="3" face="serif">You're not giving it the device address or the address of the user attempting to auth. Try changing the after authorization line in tac_plus.conf to:</font><br><br><font size="3" face="serif"><b>after authorization "/usr/bin/python /usr/local/sbin/tacplus/do_auth.py -i $address -u $user -d $name -l /tmp/do_auth.log -f /usr/local/sbin/tacplus/do_auth.ini"</b></font><br><br><font size="3" face="serif">Note that this will create a do_auth specific log in /tmp/do_auth.log but, right now - we'll need that for debugging purposes.</font><br><br><font size="3" face="serif">Also remember, you'll need to restart tac_plus for this change to take effect.</font><br><br><font size="3" face="serif">Here is an example tac_plus group that I know to work properly with do_auth.py on CatOS, IOS, IOS-XR, NX-OS, EOS and JUNOS:</font><br><br><font size="3" face="serif">group = doauthaccess {</font><br><font size="3" face="serif"> default service = permit</font><br><br><font size="3" face="serif"> service = exec {</font><br><font size="3" face="serif"> priv-lvl = 1</font><br><font size="3" face="serif"> optional idletime = 30</font><br><font size="3" face="serif"> optional acl = 2</font><br><font size="3" face="serif"> shell:roles="\"network-operator vdc-operator\""</font><br><font size="3" face="serif"> }</font><br><br><font size="3" face="serif"> service = junos-exec {</font><br><font size="3" face="serif"> bug-fix = "first pair is lost"</font><br><font size="3" face="serif"> local-user-name = "remote"</font><br><font size="3" face="serif"> allow-commands = "(.*exit)|(show cli auth.*)"</font><br><font size="3" face="serif"> deny-commands = ".*"</font><br><font size="3" face="serif"> allow-configuration = ""</font><br><font size="3" face="serif"> deny-configuration = ""</font><br><font size="3" face="serif"> }</font><br><font size="3" face="serif">after authorization "/usr/bin/python /usr/local/sbin/tacplus/do_auth.py -i $address -u $user -d $name -l /tmp/do_auth.log -f /usr/local/sbin/tacplus/do_auth.ini"</font><br><font size="3" face="serif"><b>}</b></font><br><br><br><font size="3" face="serif">One more thing... Looking at your do_auth.ini, you seem to have a space between the commands and ".*" which should not be there.</font><br><br><font size="3" face="serif">For example:</font><br><br><font size="3" face="serif">exit .*</font><br><br><font size="3" face="serif">...should be:</font><br><br><font size="3" face="serif">exit.*</font><br><font size="3" face="serif"> </font><br><br><font size="3" face="serif">I posted a complete working tac_plus.conf and do_auth.ini along with the AAA config I use on devices the other day. Take a look at that post as well.</font><br><br><br><font size="3" face="serif">--</font><br><font size="3" face="serif">John Fraizer</font><br><font size="3" face="serif">LinkedIn profile: </font><a href="http://www.linkedin.com/in/johnfraizer/" target="_blank"><font size="3" color="#0000FF" face="serif"><u>http://www.linkedin.com/in/johnfraizer/</u></font></a><br><br><br><br><font size="3" face="serif">On Fri, Aug 7, 2015 at 5:16 AM, <</font><a href="mailto:Kevin.Cruse@instinet.com" target="_blank"><font size="3" color="#0000FF" face="serif"><u>Kevin.Cruse@instinet.com</u></font></a><font size="3" face="serif">> wrote:</font><ul style="padding-left: 9pt"><font size="2" face="sans-serif">I will try upgrading to 4.14.5F and see what happens! thanks</font><font size="3" face="serif"><br></font><font size="2" face="sans-serif"><br>wondering if you are familiar with this error in do_auth execution, I am permitting exit in do_auth.ini. seems to be some issue with do_auth script:</font><font size="3" face="serif"><br></font><font size="2" face="sans-serif"><br>Reading config<br>Version F4.0.4.28 Initialized 1<br>tac_plus server F4.0.4.28 starting<br>socket FD 4 AF 2<br>uid=0 euid=0 gid=0 egid=0 s=23660848<br>connect from router1 [172.28.10.124]<br>Start authorization request<br>do_author: user='testuser'<br>user 'testuser' found<br>authorize_cmd: user=testuser, cmd=exit<br>cmd exit does not exist, denied by default<br>After authorization call: /usr/bin/python /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini</font><font size="2" face="sans-serif"><b><br>substitute: /usr/bin/python /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini<br>Dollar substitution: /usr/bin/python /usr/local/sbin/tacplus/do_auth.py -u testuser -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini<br>pid 24672 child exited status 1</b></font><font size="2" face="sans-serif"><br>cmd /usr/bin/python /usr/local/sbin/tacplus/do_auth.py -u $user -l /var/log/tacacs/do_auth_log.txt -f /usr/local/sbin/tacplus/do_auth.ini returns 1 (unconditional deny)<br>authorization query for 'testuser' tty130 from router1 rejected<br>connect from router1 [1.1.1.1]</font><font size="3" face="serif"><br><br></font><font size="2" face="sans-serif"><br>do_auth.ini:</font><font size="3" face="serif"><br></font><font size="2" face="sans-serif"><br>[users]<br>testuser =<br> snm<br>[snm]<br>command_deny =<br> configure .*<br> show controllers vip .*<br>command_permit =<br> show ip .*<br> show interface .*<br> clear counters .*<br> clear qos stat .*<br> clear mls qos int .*<br> disable .*<br> enable .*<br> end .*<br> exit .*<br> logout .*<br> ping .*<br> set length .*<br> show .*<br> skip-page-display .*<br> write network .*<br> write terminal .*<br> write memory .*</font><font size="3" face="serif"><br><br><br><br><br></font><img src="cid:1__=0ABBF437DFCAABBF8f9e@AMERICAS.CORP.LOCAL" width="16" height="16" alt="Inactive hide details for John Fraizer ---08/06/2015 06:54:05 PM---I'm not sure when this command became available in EOS but, "><font size="2" color="#424282" face="sans-serif">John Fraizer ---08/06/2015 06:54:05 PM---I'm not sure when this command became available in EOS but, at least in 4.14.5F, you will get what y</font><font size="3" face="serif"><br></font><font size="1" color="#5F5F5F" face="sans-serif"><br>From: </font><font size="1" face="sans-serif">John Fraizer <</font><a href="mailto:john@op-sec.us" target="_blank"><font size="1" color="#0000FF" face="sans-serif"><u>john@op-sec.us</u></font></a><font size="1" face="sans-serif">></font><font size="1" color="#5F5F5F" face="sans-serif"><br>To: </font><font size="1" face="sans-serif">"Kevin.Cruse@Instinet.com" <</font><a href="mailto:Kevin.Cruse@instinet.com" target="_blank"><font size="1" color="#0000FF" face="sans-serif"><u>Kevin.Cruse@instinet.com</u></font></a><font size="1" face="sans-serif">>, </font><font size="1" color="#5F5F5F" face="sans-serif"><br>Cc: </font><font size="1" face="sans-serif">Daniel Schmidt <</font><a href="mailto:daniel.schmidt@wyo.gov" target="_blank"><font size="1" color="#0000FF" face="sans-serif"><u>daniel.schmidt@wyo.gov</u></font></a><font size="1" face="sans-serif">>, "</font><a href="mailto:tac_plus@shrubbery.net" target="_blank"><font size="1" color="#0000FF" face="sans-serif"><u>tac_plus@shrubbery.net</u></font></a><font size="1" face="sans-serif">" <</font><a href="mailto:tac_plus@shrubbery.net" target="_blank"><font size="1" color="#0000FF" face="sans-serif"><u>tac_plus@shrubbery.net</u></font></a><font size="1" face="sans-serif">></font><font size="1" color="#5F5F5F" face="sans-serif"><br>Date: </font><font size="1" face="sans-serif">08/06/2015 06:54 PM</font><font size="1" color="#5F5F5F" face="sans-serif"><br>Subject: </font><font size="1" face="sans-serif">Re: [tac_plus] Cisco Nexus Authorization problem</font><br><hr width="100%" size="2" align="left" noshade><br><font size="3" face="serif"><br><br><br>I'm not sure when this command became available in EOS but, at least in 4.14.5F, you will get what you want with:<br></font><font size="2" color="#500050" face="serif"><br>aaa authorization commands all default group tacacs+ none</font><font size="3" face="serif"><br><br><br>--<br>John Fraizer<br>LinkedIn profile: </font><a href="http://www.linkedin.com/in/johnfraizer/" target="_blank"><font size="3" color="#0000FF" face="serif"><u>http://www.linkedin.com/in/johnfraizer/</u></font></a><font size="3" face="serif"><br><br><br><br>On Thu, Aug 6, 2015 at 1:58 PM, <</font><a href="mailto:Kevin.Cruse@instinet.com" target="_blank"><font size="3" color="#0000FF" face="serif"><u>Kevin.Cruse@instinet.com</u></font></a><font size="3" face="serif">> wrote:</font><ul style="padding-left: 36pt"><font size="3" face="serif">tried that! arista only takes this command with no arguments:<br><br>aaa authorization config-commands<br><br>it still didn't work.<br><br>fyi - i just tried same config with cisco router and it works perfectly,<br>running 4.13.11M of EOS.<br><br><br><br>From: Daniel Schmidt <</font><a href="mailto:daniel.schmidt@wyo.gov" target="_blank"><font size="3" color="#0000FF" face="serif"><u>daniel.schmidt@wyo.gov</u></font></a><font size="3" face="serif">><br>To: </font><a href="mailto:Kevin.Cruse@instinet.com" target="_blank"><font size="3" color="#0000FF" face="serif"><u>Kevin.Cruse@instinet.com</u></font></a><font size="3" face="serif">,<br>Cc: Aaron Wasserott <</font><a href="mailto:aaron.wasserott@viawest.com" target="_blank"><font size="3" color="#0000FF" face="serif"><u>aaron.wasserott@viawest.com</u></font></a><font size="3" face="serif">>,<br> "</font><a href="mailto:tac_plus@shrubbery.net" target="_blank"><font size="3" color="#0000FF" face="serif"><u>tac_plus@shrubbery.net</u></font></a><font size="3" face="serif">" <</font><a href="mailto:tac_plus@shrubbery.net" target="_blank"><font size="3" color="#0000FF" face="serif"><u>tac_plus@shrubbery.net</u></font></a><font size="3" face="serif">><br>Date: 08/06/2015 04:09 PM<br>Subject: Re: [tac_plus] Cisco Nexus Authorization problem<br><br><br><br>This part of the email looks interesting:<br><br>But if you<br>want them in conf t mode but restrict their commands at that level, you<br>need to enable something like this:<br><br>aaa authorization config-commands default group myTacacsGroup local<br></font></ul><font size="1" face="Georgia"><i><br><br>========================================================================================================= </i></font><p><font size="1" face="Georgia"><b><i><<<< Disclaimer >>>></i></b></font><font size="1" face="Georgia"><i> </i></font><p><font size="1" face="Georgia"><i>This message is intended solely for use by the named addressee(s). If you receive this transmission in error, please immediately notify the sender and destroy this message in its entirety, whether in electronic or hard copy format. Any unauthorized use (and reliance thereon), copying, disclosure, retention, or distribution of this transmission or the material in this transmission is forbidden. We reserve the right to monitor and archive electronic communications. This material does not constitute an offer or solicitation with respect to the purchase or sale of any security. It should not be construed to contain any recommendation regarding any security or strategy. Any views expressed are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. This communication is provided on an “as is” basis. It contains material that is owned by Instinet Incorporated, its subsidiaries or its or their licensors, and may not, in whole or in part, be (i) copied, photocopied or duplicated in any form, by any means, or (ii) redistributed, posted, published, excerpted, or quoted without Instinet Incorporated's prior written consent. Please access the following link for important information and instructions: </i></font><a href="http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt" target="_blank"><font size="1" color="#0000FF" face="Georgia"><i><u>http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt</u></i></font></a><font size="1" face="Georgia"><i> </i></font><p><font size="1" face="Georgia"><i>Securities products and services are provided by locally registered brokerage subsidiaries of Instinet Incorporated: Instinet Australia Pty Limited (ACN: 131 253 686 AFSL No: 327834), regulated by the Australian Securities & Investments Commission; Instinet Canada Limited, member IIROC/CIPF; Instinet Pacific Limited, authorized and regulated by the Securities and Futures Commission of Hong Kong; Instinet Singapore Services Private Limited, regulated by the Monetary Authority of Singapore, trading member of The Singapore Exchange Securities Trading Private Limited and clearing member of The Central Depository (Pte) Limited; and Instinet, LLC, member SIPC. </i></font><p><font size="1" face="Georgia"><i><br><br>========================================================================================================= </i></font></ul><br>
<p><font face="sans-serif"><div style="font-size:12px; font-style:italic; font-family:georgia,arial,sans-serif">
<br><br>
=========================================================================================================
<div style="font-size:12px; font-style:italic; font-family:georgia,arial,sans-serif">
<p>
<B><<<< Disclaimer >>>></B>
<p>
This message is intended solely for use by the named addressee(s). If you receive this transmission in error, please immediately notify the sender and destroy this message in its entirety, whether in electronic or hard copy format. Any unauthorized use (and reliance thereon), copying, disclosure, retention, or distribution of this transmission or the material in this transmission is forbidden. We reserve the right to monitor and archive electronic communications. This material does not constitute an offer or solicitation with respect to the purchase or sale of any security. It should not be construed to contain any recommendation regarding any security or strategy. Any views expressed are those of the individual sender, except where the message states otherwise and the sender is authorized to state them to be the views of any such entity. This communication is provided on an “as is” basis. It contains material that is owned by Instinet Incorporated, its subsidiaries or its or their licensors, and may not, in whole or in part, be (i) copied, photocopied or duplicated in any form, by any means, or (ii) redistributed, posted, published, excerpted, or quoted without Instinet Incorporated's prior written consent. Please access the following link for important information and instructions: <a href=" http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt"> http://instinet.com/includes/index.jsp?thePage=/html/le_index.txt</a>
<p>
Securities products and services are provided by locally registered brokerage subsidiaries of Instinet Incorporated: Instinet Australia Pty Limited (ACN: 131 253 686 AFSL No: 327834), regulated by the Australian Securities & Investments Commission; Instinet Canada Limited, member IIROC/CIPF; Instinet Pacific Limited, authorized and regulated by the Securities and Futures Commission of Hong Kong; Instinet Singapore Services Private Limited, regulated by the Monetary Authority of Singapore, trading member of The Singapore Exchange Securities Trading Private Limited and clearing member of The Central Depository (Pte) Limited; and Instinet, LLC, member SIPC.
<p>
<br><br>
=========================================================================================================
</div></font>
</body></html>