The lufslist command is part of a suite of commands that make up the Live Upgrade feature of the Solaris operating environment. See live_upgrade(5) for a description of the Live Upgrade feature.

The lufslist command lists the configuration of a boot environment (BE). The output contains the disk slice (file system), file system type, and file system size for each BE mount point.

The following is an example of lufslist output.

# lufslist BE_name Filesystem fstype size(Mb) Mounted on ------------------------------------------------------------------ /dev/dsk/c0t0d0s1 swap 512.11 - /dev/dsk/c0t4d0s3 ufs 3738.29 / /dev/dsk/c0t4d0s4 ufs 510.24 /opt

File system type can be ufs, swap, or vxfs, for a Veritas file system. Under the Filesystem heading can be a disk slice or a logical device, such as a disk metadevice used by volume management software.

The lufslist command requires root privileges.

The lufslist command has the following options:

-l error_log

Error and status messages are sent to error_log, in addition to where they are sent in your current environment.

-o outfile

All command output is sent to outfile, in addition to where it is sent in your current environment.

-X

Enable XML output. Characteristics of XML are defined in DTD, in /usr/share/lib/xml/dtd/lu_cli.dtd.<num>, where <num> is the version number of the DTD file.

BE_name

Name of the BE for which file systems are to be reported. You cannot specify a BE that is involved in another Live Upgrade operation.

The following exit values are returned:

0

Successful completion.

>0

An error occurred.

/etc/lutab

list of BEs on the system

/usr/share/lib/xml/dtd/lu_cli.dtd.<num>

Live Upgrade DTD (see -X option)

See attributes(5) for descriptions of the following attributes:

lu(1M), luactivate(1M), lucancel(1M), lucompare(1M), lucreate(1M), lucurr(1M), ludelete(1M), ludesc(1M), lumake(1M), lumount(1M), lurename(1M), lustatus(1M), luupgrade(1M), lutab(4), attributes(5), live_upgrade(5)