Sun Microsystems, Inc.
spacerspacer
spacer   www.sun.com docs.sun.com | | |  
spacer
black dot
   
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
    
 
File Formatsvfstab(4)


NAME

 vfstab - table of file system defaults

DESCRIPTION

 

The file /etc/vfstab describes defaults for each file system. The information is stored in a table with the following column headings:

 
device       device       mount      FS      fsck    mount      mount
to mount     to fsck      point      type    pass    at boot    options

The fields in the table are space-separated and show the resource name (device to mount), the raw device to fsck (device to fsck), the default mount directory (mount point), the name of the file system type (FS type), the number used by fsck to decide whether to check the file system automatically (fsck pass), whether the file system should be mounted automatically by mountall (mount at boot), and the file system mount options (mount options). (See respective mount file system man page below in SEE ALSO for mount options.) A '-' is used to indicate no entry in a field. This may be used when a field does not apply to the resource being mounted.

The getvfsent(3C) family of routines is used to read and write to /etc/vfstab.

/etc/vfstab can be used to specify swap areas. An entry so specified, (which can be a file or a device), will automatically be added as a swap area by the /sbin/swapadd script when the system boots. To specify a swap area, the device-to-mount field contains the name of the swap file or device, the FS-type is "swap", mount-at-boot is "no" and all other fields have no entry.

EXAMPLES

 

The following are vfstab entries for various file system types supported in the Solaris operating environment.

Example 1. NFS and UFS Mounts
 

The following entry invokes NFS to automatically mount the directory /usr/local of the server example1 on the client's /usr/local directory with read-only permission:

 
example1:/usr/local - /usr/local nfs - yes ro

The following example assumes a small departmental mail setup, in which clients mount /var/mail from a server mailsvr. The following entry would be listed in each client's vfstab:

 
mailsvr:/var/mail - /var/mail nfs - yes intr,bg

The following is an example for a UFS file system in which logging is enabled:

 
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging

See mount_nfs(1M) for a description of NFS mount options and mount_ufs(1M) for a description of UFS options.

Example 2. pcfs Mounts
 

The following example mounts a pcfs file system on a fixed hard disk on an (Intel Architecture) IA machine:

 
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -

The example below mounts a Jaz drive on a SPARC machine. Normally, the volume management daemon (see vold(1M)) handles mounting of removable media, obviating a vfstab entry. If you choose to specify a device that supports removable media in vfstab, be sure to set the mount-at-boot field to no, as below. Such an entry presumes you are not running vold.

 
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -

For removable media on a SPARC machine, the convention for the slice portion of the disk identifier is to specify s2, which stands for the entire medium.

For pcfs file systems on IA machines, note that the disk identifier uses a p (p0) and a logical drive (c, in the /win98 example above) for a pcfs logical drive. See mount_pcfs(1M) for syntax for pcfs logical drives and for pcfs-specific mount options.

Example 3. CacheFS Mount
 

Below is an example for a CacheFS file system. Because of the length of this entry and the fact that vfstab entries cannot be continued to a second line, the vfstab fields are presented here in a vertical format. In re-creating such an entry in your own vfstab, you would enter values as you would for any vfstab entry, on a single line.

 
device to mount:  svr1:/export/abc 
device to fsck:  /usr/abc 
mount point:  /opt/cache 
FS type:  cachefs 
fsck pass:  7 
mount at boot:  yes 
mount options: 
local-access,bg,nosuid,demandconst,backfstype=nfs,cachedir=/opt/cache

See mount_cachefs(1M) for CacheFS-specific mount options.

Example 4. Loopback File System Mount
 

The following is an example of mounting a loopback (lofs) file system:

 
/export/test - /opt/test lofs - yes -

See lofs(7FS) for an overview of the loopback file system.

SEE ALSO

 

fsck(1M), mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), mount_ufs(1M), swap(1M), getvfsent(3C)

System Administration Guide: Basic Administration


SunOS 5.9Go To TopLast Changed 21 Jun 2001

 
      
      
Copyright 2002 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.