Sun Microsystems, Inc.
spacer spacer
spacer   Sun System Handbook Home | Systems | Components | General Info | Search | Feedback 
spacer
black dot
 
black fade
 

PCI I/O Board

Sun Fire 4800 / 4810 / 6800

Option 4050

501-4404 540-4616
PCI Assembly FRU Assembly

Sun Fire 3800-6800 Codename: Serengeti

Notes

  1. The minimum operating system is Solaris 8 4/01.
  2. I/O Board slots are labeled IB6 to IB9.
  3. The left to right system installation sequence is IB6, IB8, IB7, and IB9.
  4. Slots 0 and 1 support short length (174.63 mm) PCI boards.
  5. Slots 0 and 1 do not support standard length (312 mm) PCI boards.
  6. Slots 2 through 7 support short and standard length PCI boards.
  7. InfoDoc 42950 provides a "ftp-only" shortcut for updating the flashprom firmware.
  8. All I/O boards within a system must be at the same firmware revision.
    When replacing an I/O board, confirm that the firmware version on the replacement matches the other I/O boards.

Filler Notes

  1. Install PCI Filler Board 540-4045 in all short empty PCI board slots.
  2. Install PCI Filler Board 540-4046 in all long empty PCI board slots.
  3. Install Filler Panel 330-2822 when servicing a PCI I/O board slot.

References

  1. PCI I/O Installation Guide, 806-2949.
  2. Powering On and Off Guide, 806-2956.

WebToneWebToneWebToneWebTone
 Copyright 1994-2003 Sun Microsystems, Inc.,  901 San Antonio Road, Palo Alto, CA 94303 USA.  All rights reserved.
 Legal Terms Privacy Policy Feedback