|
FCO
|
Impl.
|
Components
Affected |
Description |
| A0200-1 |
M
|
XVR-1000 Graphics Accelerator (X3256A) |
SunBlade 1000/2000 and Ultra 60/80 systems
may exhibit a blank screen upon boot up with an XVR-1000 Graphics Accelerator
installed. |
| A0189-1 |
U
|
Monitor 21-inch and Expert 3D Lite Graphics
PCI (X3684A) |
Ultra 60/80 and SunBlade 100/1000 systems
with Expert3D-Lite cards and certain 21-inch monitors will have to either
add or replace the monitor adaptor. |
| A0186-1 |
U
|
SunPCi II (375-0131-04) and SunPCi IIpro
(375-3051-01) cards |
SunPCi II and SunPCi IIpro cards may not
respond after rapid/successive power cycling. |
| A0182-1 |
C
|
18GB and 36GB IBM disk drives |
18GB and 36GB IBM disk drives experiencing
high failure rate in high humidity and high temperature environments. |
| A0164-1 |
C
|
FC100/P FC-AL PCI Card (375-0040-02 or
below) |
A host system using the 375-0040-01 or
-02 FC100/P FC-AL PCI card to attach to FC-AL storage (StorEdge A5x00 and
A3500) may experience loop errors, which may affect data access to that
storage. In extreme cases, this can result in the host losing its connection
to the storage completely. However, it is more common for the loop errors
to be intermittent initially, perhaps becoming more frequent over a period
of days or a few weeks. The failures are sometimes sensitive to the data
pattern on the FC-AL loop, so they are not always reproducible with current
diagnostic software. |
| A0158-1 |
U
|
System Board (501-4450-13) |
Ultra 60 systems shipped out of Sun UK
may experience crystal reliability issues which results in mutliple failure
types. |
| A0153-1 |
U
|
System Board 501-4450-10 (or below) |
SCSI transport soft retry errors could
occur on Ultra 60 systems running external Ultra SCSI I/O devices. When
there is a Sun MultiPack connected to the onboard external Ultra SCSI port,
the system gives errors in the /var/adm/messages file. |
| A0149-1 |
M
|
System Board (501-4450-10/11) |
Ultra 60 systems with the 501-4450-11
motherboard (or the 501-4450-10 with Deviation sticker WO_14997) and 1 GB
of memory installed have a high probability of experiencing undetectable
data corruption. This could lead to corrupted application results and unstable
system operation. |
| A0146-1 |
U
|
FFB2+ Vertical/SB (501-4789-05 or below);
FFB2+ Vertical/DBZ (501-4788-05 or below) |
Systems with FFB2+ installed may experience
right shift of horizontal lines that contain the cursor and/or border line
curves toward the mouse pointer when the mouse pointer is placed close to
the left border of a cmdtool window. This can be easily seen when you set
the FFB resolution to 960x680x112s with cmdtool's foreground color set to
black and background to white. |
| A0142-1 |
U
|
System Board (501-4450-08/09) |
Ultra 60 system may hang when attempting
to update flashPROM via patch 106455-03. When attempting to update the flashPROM
from OBP 3.11 version 25 (525-1701-08) to OBP 3.11 version 26 (525-1701-09)
the system will hang during the ERASURE procedure. Once this happens, the
flashPROM has the OBP half erased and is unable to boot. |
| A0139-1 |
U
|
PGX PCI-based 8-bit Frame Buffer (370-2256-02)
|
Systems with a PGX PCI-based 8-bit Frame Buffer may display a vertical
black stripe when running the OpenWindows environment. This occurs only
with frame buffers with an Fcode version 1.09 (determined by reading the
label on the EPROM located at U4 on the frame buffer: 113-377-1-109).
|
