Connecting the Netra T1 Server to a Laptop

NOTE - Make sure you do not attempt to use the laptop's (25-pin) parallel port
instead of its serial port (the serial port is normally a male 9-pin D-type connector).                         

1. Connect the RJ45-to-RJ45 patch cable (supplied with the server) to the 
   Serial A/LOM port on the back panel of the Netra T1 server.

2. Connect the other end of the patch cable to the RJ45 connector on the 
   silver-colored DB25 (25-way DSUB male-to-female 8 POS RJ-45) adapter 
  (part number 530-2889-0x) supplied with the Netra T1 server.            

     Netra T1 Serial Port Pin-outs
     =============================
     
     8-Pos RJ45           25-pin DSUB 
     -------------------------
      Pin 1 RTS ========> Pin 5 CTS
      Pin 2 DTR ========> Pin 6 DTR
      Pin 3 TXD ========> Pin 3 RXD
      Pin 4 REF ========> Pin 7 GND
      Pin 5 REF ========> Pin 7 GND
      Pin 6 RXD ========> Pin 2 TXD
      Pin 7 DSR ========> Pin 20 DTR
      Pin 8 CTS ========> Pin 4 RTS      

Please view the PDF or Postscript attachment for a diagram on installing this cable.

Reference the Netra T1 AC200 & DC200 server product notes (P/N 806-6134-13) for additional information.