Setting the default config on the Storedge 3310

From within the cli menu screen:

<CTRL + acbd>

Maint - Password?

oemmaint <=== this is the password!

Maint> defaults restore

This operation will clear important configuration information!

Are you sure you want to do this (y/n)? y

Defaults restored!

Maint>q

This operation clears configuration information from nvram. If you previously saved nvram to disks you can

choose to restore nvram to get back your configuration including logical devices and volumes.

It is recommended that you save nvram to disks after the system has been configured.

The channel mappings for the logical drives is not saved so you must manually re-map the logical drives to the channels.

To save or restore nvram: from main menu, SYSTEM FUNCTIONS=>CONTROLLER MAINTENANCE.

Daniel Martinez

d.m@sun.com