| SRDB ID | Synopsis | Date | ||
| 23181 | Sun StorEdge[TM] T3: Symptom:cu Switched Disks in a T300 but Doesn't Remember Their Order | 14 Nov 2002 |
| Status | Issued |
| Description |
T3array (T300)
cu switched disks in a T300, but doesn't remember their order, as a result the configured T300 will not boot
SOLUTION SUMMARY:
If the disks of a configured T300 have been moved around, the T300 pSOSystem will not boot. the user will be dropped to the EPROM level, which is similar to the OBP level in a server/workstation. At this level, the user will have a ">" prompt.
1. type "boot -s" this command will cause the private area to be rebuilt and will remap the drive positions
2. the T300 will then boot normally.
INTERNAL SUMMARY:Internal Section
James Beck
Storage/East Technical Support Engineer
james.beck@east.sun.com
SUBMITTER: James Beck APPLIES TO: Hardware/Disk Storage Subsystem/StorEdge Disk Array/StorEdge T3 ATTACHMENTS: