[rancid] RANCiD 3.6

[heasley]

RANCiD 3.6 is available at
ftp://ftp.shrubbery.net/pub/rancid/rancid-3.6.0.tar.gz

The next release will be 4.0, which will no longer include support for
Compass EOS.  A fix for handling of ACOS AFLEX groups that was removed
in 3.6 is a WiP for 4.0 and we need folks who can test it.

Change log contents for 3.6:
        rancid.pm: ipaddrval() if IPv6 prefix length is missing, simply set 128.

        *login: in_proc must be global in expect_after.  had trouble reproducing
        the original error, but this should be the correct fix.

        xlogin: escape the * in lastprompt - Mattieu Beretti

        *login: change handling of ssh key-related prompts to one line at a time
        to eliminate timing-related problem.

        alogin: login() eat one line at a time

        a10login: remove the aflex-specific stuff.  This is the wrong way to
        do this and it doesn't work properly anyway.

        control_rancid: create <group>/configs if it does not exist

        hrancid: use rancid.pm (removes code duplication)

        rancid.pm: check for existence of functions for given device type after
        loading the modules for the type.  return failure if any are missing.

        par: add -FH options

        rancid.types.conf, iosshtech.pm: Add device type ciscoshtech for
        example purposes

        acos.pm: filter trailing WS & recognize incomplete/invalid command
        error in basicFilter()

        acos.pm: filter trailing WS in ShowAflex()

        acos.pm: 'show vlan' is 'show vlans' in ACOS 4.x.

        acos.pm: Add cmd 'show partition-config all' for ACOS 4.x, where
        'show running-config all-partitions' does not work.

        acos.pm: recognize invalid cmd error in ShowRunningConfig() and filter
        the config size comment

        fnlogin: missing "end" to exit global mode for -[csx] - Richard Goode

        plogin: add -m & -M

        rancid.pm: missing variable initialization

        nxos.pm: fix bug in recognizing the end of an access-list

        hlogin: set tty init options when there is no controlling tty and set
        set the term width to 132 when there is no controlling tty and for -[sc]
        so that the hp device does not wrap lines.

        ios.pm: also filter IPv6 PDP addresses - Reuben Farrelly

        ios.pm: evaluation license periods are displayed differently

        lg: Add show interface optics 

        iosxr.pm: More useless FPD messages

        junos.pm: handle a transient cmd protocol failure seen in show version

        control_rancid: use git ls-files instead of git status for .gitignore
        and <group>/rancid.conf

        fnrancid: fix formatting around removal of private-keys

        bigip.pm: filter snmpv3 oscillating auth-password-encrypted

        iosxr.pm: filter useless FPD upgrade message