problem with Cat6000's

[Josh Rivel]

Hi.
I'm using rancid-2.2 on an OpenBSD 3.0 box, tcl/tk 8.3.3, expect 5.24.
Works fine for my various Foundry's and IOS devices (2500s, 4000's, 
7200's, etc.)
However, on the switch side of the 6500's (a 6506 and 6509), and also
on a 2980
I get the following in my log files:

starting: Thu Jan 24 14:16:24 EST 2002
Trying to get all of the configs.
cat6506: End of run not found
end
cat6509: End of run not found
end
cat2980 End of run not found
end
=====================================
etc.

a cloginc -c "cmd1;cmd2" switch-name
works fine, no errors.

I saw the same thing when I was running rancid-2.1 on Solaris 2.6,
figured upgrading to OpenBSD, newer versions of rancid and expect
would solve the problem, but it remains.
The prompt on the switches is:
switchname>
and 
switchname> (enable)
when in enabled mode.

All the switches are running IOS which uses SSH, I am running OpenSSH 3.0.2

The only relevant lines in the .cloginrc is:

add method cat650*            ssh
add method cat2980*        ssh

and

add cyphertype *                {3des}

Thanks.

Here's the output of clogin -s "show version" to one of the switches:

$ clogin -c "show ver" cat6509 
cat6509
spawn ssh -c 3des -x -l rancid cat6509
rancid at cat6509's password: 

Cisco Systems Console
cat6509> enable
Enter password: 
cat6509> (enable) 
cat6509> (enable) set length 0
Screen length for this session set to 0.
cat6509> (enable)  show ver
WS-C6509 Software, Version NmpSW: 7.1(1)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Nov 30 2001, 17:24:31

System Bootstrap Version: 5.3(1)

Hardware Version: 2.0  Model: WS-C6509  Serial #: SCA0349028V

PS1  Module: WS-CAC-1300W    Serial #: ACP03451461
PS2  Module: WS-CAC-1300W    Serial #: ACP03430209

Mod Port Model               Serial #    Versions
--- ---- ------------------- ----------- --------------------------------------
1   2    WS-X6K-SUP1A-2GE    SAD03411160 Hw : 3.4
                                         Fw : 5.3(1)
                                         Fw1: 5.4(2)
                                         Sw : 7.1(1)
                                         Sw1: 7.1(1)
         WS-F6K-PFC          SAD03430164 Hw : 1.1
2   48   WS-X6248-RJ-45      SAD040102MV Hw : 1.1
                                         Fw : 4.2(0.24)VAI78

                                         Sw : 7.1(1)
3   48   WS-X6248-RJ-45      SAD040102T4 Hw : 1.1
                                         Fw : 4.2(0.24)VAI78
                                         Sw : 7.1(1)
15  1    WS-F6K-MSFC         SAD03427681 Hw : 2.1
                                         Fw : 12.0(7)XE1,
                                         Sw : 12.0(7)XE1,

       DRAM                    FLASH                   NVRAM
Module Total   Used    Free    Total   Used    Free    Total Used  Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1       65408K  45434K  19974K  16384K   9896K   6488K  512K  296K  216K

Uptime is 27 days, 23 hours, 14 minutes
cat6509> (enable)Connection to cat6509 closed by remote host.
Connection to cat6509 closed.

-- 
josh