HP Procurve 4000 and 2400

[john heasley]

All I have is a 2524.  perhaps these have a 'no menu' or 'default cmd-line'
like-command in the vty or global config sections.  OR, maybe there is a
radius or tacacs AV that will set the default for a given login.

Thu, Sep 04, 2003 at 01:41:01PM -0500, Matthew Davy:
> I don't think you can get to the command line directly.   You have to first
> go to the menu interface and select "Diagnostics" then "Command Prompt".
> 
> - Matt
> 
> -- 
> Matthew Davy                        
> Chief Network Engineer, Indiana University 
> University Information Technology Services / Abilene Network Operations Center 
> 2711 East 10th Street, Bloomington IN, 47403
> mpd at iu.edu /  812.855.7728 
> PGP key fingerprint: A84D DFB6 9DD5 BEB4 1EF7  D713 956F F85C 6422 CBEB         
> 
> On Thu, Sep 04, 2003 at 11:36:56AM -0700, Ellen M. Woods wrote:
> > Hi,
> > 
> > Is there any way to get a command line interface when logging
> > into the HP Procurve 4000 and 2400?  I can only get to the menu
> > interface and then to the CLI from there, so rancid is failing.
> > 
> > I looked through the manuals and didn't see where that could
> > be done, but was hoping it could.
> > 
> > Thanks,
> > 
> > Ellen
> > 
> > 
> > -- 
> > 
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >                                                         _____
> > Ellen M. Woods      Network Administrator           LSI|LOGIC|
> > ellen at lsil.com      LSI Logic - GES LAN Support        |     |
> >                                                        |_____|
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > 
> > 
> >