Newbie Problem

[Andrew Fort]

On 6/01/2004 10:15 AM, Kevin O'Malley wrote:

> Greetings All,
>
> [rancid at localhost rancid]$ rancid -d -l   ROUTERNAME

[snip]

> Done : ROUTERNAME#exit
>
> ROUTERNAME: missed cmd(s): show diag,show install active,show 
> controllers cbus
> ROUTERNAME: missed cmd(s): show diag,show install active,show 
> controllers cbus
>
> Which looks good, and makes a .new file, but it still runs all 4 
> times. I am looking at the rancid code but I fear I am not man enough. 
> Any help would be appriciated.


Check the .new file for the exchange between expect and the router's 
output around the command 'show diag', 'show install active', and 'show 
controllers cbus'. 

If you have output and it all looks like it should be OK, then the 
"rancid" program (parser) is missing those bits for whatever reason.  If 
this is so, try upgrading to 2.3beta first off as some similar sounding 
parser bugs have been cleaned up recently (check the recent list 
archives for occurances of "ftp.shrubbery.net" to get the link).

-afort