CatOS Problem

Tue Oct 5 15:15:00 UTC 2004

Worked like a charm for me too.  Thanks.

  _____  

From: darren kruse [mailto:darren at adam.com.au] 
Sent: Monday, October 04, 2004 8:52 PM
To: john heasley
Cc: Christopher E. Brown; Coupe, Mark (ITD);
rancid-discuss at shrubbery.net
Subject: Re: CatOS Problem

John
thanks !! - works for me ... 

%less coreswitches.20041005.101429
starting: Tue Oct 5 10:14:29 CST 2004
Trying to get all of the configs.
All routers sucessfully completed.
cvs diff: Diffing .
cvs diff: Diffing configs
cvs commit: Examining .
cvs commit: Examining configs
Checking in configs/c55k-2;
/usr/local/rancid/var/CVS/coreswitches/configs/c55k-2,v  <--  c55k-2
new revision: 1.13; previous revision: 1.12
done
Checking in configs/c55k-3;
/usr/local/rancid/var/CVS/coreswitches/configs/c55k-3,v  <--  c55k-3
new revision: 1.27; previous revision: 1.26
done
ending: Tue Oct 5 10:15:17 CST 2004

I had been running clogin v.177, I'm now running..

%less /usr/local/libexec/rancid/clogin
## $Id: clogin.in,v 1.79 2004/05/27 21:57:52 heas 

cheers,
darren.

john heasley wrote: 

	Could you all please try this version of clogin.in?
		ftp://ftp.shrubbery.net/pub/rancid/clogin.in

	I believe Christopher (in a private email) hit on the bug that
is triggering
	at least some of these issues.  It was fixed, but we've have not
been able
	release a 2.3.2.

	Fri, Oct 01, 2004 at 11:47:18AM +0930, darren kruse:

		I tried your suggestion re autoenable ...

		ferret# less .cloginrc
		add autoenable c55k-2 0
		add password c55k-1  userpass enablepass
		add password c55k-2  userpass enablepass
		add password c55k-3 userpass enablepass

		But, it's still doing the same thing , since the upgrade
to 2.3.1
		it works for the first cat (c55k-1) , then chokes on the
second and third.

		Trying to get all of the configs.
		write(spawn_id=3): I/O error
		   while executing
		"send "exit\r""
		   invoked from within
		"expect -nobrace -re {^[^
		^M *]*c55k2> \(enable\)} {
		etc.. as previously advised..

		darren

		Christopher E. Brown wrote:

			I noticed that for whatever reason there is an
issue with prompt 
			parsing on CatOS devices.

			I had to set login/enable passwords and
autoenable = 0 in cloginrc for 
			my Cat)S devices.

			Coupe, Mark (ITD) wrote:

				Hi,

				I've got a Cisco network of 1900s
(haven't dealt with yet), IOS and 
				CatOS.  I've got all the IOS and CatOS
devices in a single router.db 
				file.  The manufacturer entry is set for
each to either 'cisco' or 
				'cat5' as appropriate.  The problem that
I'm having is that while all 
				of the IOS devices have their config
pulled without issue, none of 
				the CatOS devices do.

				I have successfully logged into and run
commands on the CatOS devices 
				by using 'clogin' and specifying the
hostname and commands.  When I 
				use 'rancid-run' I get the following
error message (or similar) in 
				the logs for each of the devices:

				"<hostname> clogin error: Error: TIMEOUT
reached
				<hostname>: missed cmd(s): write term
all,show port ifindex,show 
				module,dir sup-microcode:,dir
sup-bootflash:,dir bootflash:,dir 
				slot0:,showversion,show flash,write
term,show boot,dir slot1:
				<hostname>: End of run not found"

				Can anyone point me in the right
direction at least because while I 
				realize that the "End of run not found"
is the bigger issue than the 
				"missed cmd(s)" (according to stuff I've
read in the archives) I'm 
				not really sure where I should be
looking.

				Thanks,

				Mark

		-- 
		Darren Kruse
		Network Operations Centre
		Adam Internet
		mob 0404 034 773
		ph (08) 8423 4000
		fax(08) 8231 0223
		Office Address: 117 King William St, Adelaide 5000
Postal Address:
		G.P.O. Box 121, Adelaide 5001

-- 
Darren Kruse
Network Operations Centre
Adam Internet
mob 0404 034 773
ph (08) 8423 4000
fax(08) 8231 0223
Office Address: 117 King William St, Adelaide 5000 Postal Address:
G.P.O. Box 121, Adelaide 5001