Cisco "show inventory" command

[Arnold Nipper]

On 05.07.2005 18:21 Ed Ravin wrote

> On another mailing list that I (and some of you) subscribe to, someone
> mentioned the "show inventory" command.  It seems to be tailor-made
> for RANCID.  It's in 12.0(30)S, and apparently in other recent releases.

Ans it is in CatOS as well (at least since 8.3(3))

> Sample output below...
> 

for CatOS format looks identical

> 	-- Ed
> 
> ------------------------
> NAME: "7513 chassis,ID:73002384", DESCR: "7513 chassis"
> PID: 2                 , VID: Hardware Version : 1.00, Board Revision : B0, SN: 73002384
> 
> NAME: "Line Card 0", DESCR: "Versatile Interface Processor (VIP2)"
> PID: VIP2              , VID: Hardware Version : 2.04, Board Revision : D0, SN: 6354210
> 

NAME: "1", DESCR: "1000BaseX Ethernet 48 port WS-X6748-SFP Rev. 1.3"
PID: WS-X6748-SFP      , VID:    , SN: SAD082108BS

NAME: "submodule 1/1", DESCR: "Centralized Fwd Card WS-F6700-CFC Rev 2.0"
PID: WS-F6700-CFC      , VID:    , SN: SAD080600LP

NAME: "2", DESCR: "1000BaseX Ethernet 48 port WS-X6748-SFP Rev. 1.3"
PID: WS-X6748-SFP      , VID:    , SN: SAD082108BC




Arnold
-- 
Arnold Nipper, AN45