Sorting NAT Statements... producing useless diffs...
Roderick B. Greening
Roderick.Greening at gt.ca
Sun Jun 12 01:50:36 UTC 2005
Nope. As long as the order doesn't change so I don't see multiple diff's
each time the hash decides to sort differently :)
-----Original Message-----
From: 'john heasley' [mailto:heas at shrubbery.net]
Sent: Saturday, June 11, 2005 7:22 PM
To: Roderick B. Greening
Cc: 'john heasley'; 'rancid-discuss at shrubbery.net'
Subject: Re: Sorting NAT Statements... producing useless diffs...
Is there any significance to the order of (list|route-map|static) or
(ip|esp|network|tcp|udp)?
Sat, Jun 11, 2005 at 10:12:29AM -0700, Roderick B. Greening:
> Here's how my router see's NAT:
>
> ubr900(config)#ip nat ?
> Stateful Stateful NAT configuration commands
> inside Inside address translation
> log NAT Logging
> outside Outside address translation
> pool Define pool of addresses
> service Special translation for application using non-standard port
> translation NAT translation entry configuration
>
> ubr900(config)#ip nat inside ?
> destination Destination address translation
> source Source address translation
>
> ubr900(config)#ip nat inside source ?
> list Specify access list describing local addresses
> route-map Specify route-map
> static Specify static local->global mapping
>
> ubr900(config)#ip nat inside source static ?
> A.B.C.D Inside local IP address
> esp IPSec-ESP (Tunnel mode) support
> network Subnet translation
> tcp Transmission Control Protocol
> udp User Datagram Protocol
>
> ubr900(config)#ip nat inside source static tcp ?
> A.B.C.D Inside local IP address
>
> ubr900(config)#ip nat inside source static tcp 1.1.1.1 ?
> <1-65535> Local UDP/TCP port
>
> ubr900(config)#ip nat inside source static tcp 1.1.1.1 9999 ?
> A.B.C.D Inside global IP address
> interface Specify interface for global address
>
> The 3rd field can be (inside|outside)
> The 4th field can be (source|destination) *note: for outside translation,
> only source if available
> The 5th field can be (list|route-map|static)
>
> At this point, we probably need to be able to split list|route-map|static
> off.
>
> List and route-map are basically the same, and have all the same options:
>
> ip nat (inside|outside) (source|destination) (list|route-map) (\S+) pool
> (\S+)
>
> For static translations, we have the following:
>
> ip nat (inside|outside) (source|destination) static
> (tcp|udp|esp|network|\d+\.\d+\.\d+\.\d+)
>
> If it's (tcp|udp|esp) then you have an IP address and port number followed
> by either another IP address and port number or the keyword interface
> replaces the second IP address.
>
> Is this enough detail?
>
> Thanks.
>
>
> -----Original Message-----
> From: john heasley [mailto:heas at shrubbery.net]
> Sent: Friday, June 10, 2005 9:20 PM
> To: Roderick B. Greening
> Cc: 'rancid-discuss at shrubbery.net'
> Subject: Re: Sorting NAT Statements... producing useless diffs...
>
> sigh, I dont have a pix, but from the manual, I think rancid's match is
> deficient.
>
> /^ip nat (\S+) source static (\S+)/ &&
>
> doesn't handle a protocol field (udp|tcp) as the 6th field.
>
> /^ip nat (\S+) source static ((udp|tcp) )?(\S+)/ &&
> ProcessHistory("IP NAT $1","ipsort","$4","$_") && next;
>
> the IP match probably ought be more specific too,
>
> /^ip nat (\S+) source static ((udp|tcp) )?(\d+\.\d+\.\d+\.\d+)/ &&
>
> What options are available for the 6th field?
>
> Fri, Jun 10, 2005 at 07:26:53AM -0700, Roderick B. Greening:
> > Hi,
> >
> > I keep getting uninteresting diffs like the following:
> >
> > retrieving revision 1.10
> > diff -U4 -r1.10 <FILENAME REMOVED>
> > @@ -101,11 +101,11 @@
> > no keepalive
> > !
> > ip default-gateway <IP REMOVED>
> > + ip nat inside source route-map nonat interface cable-modem0 overload
> > ip nat inside source static udp 192.168.1.11 5632 interface
cable-modem0
> > 5632
> > ip nat inside source static tcp 192.168.1.11 5631 interface
cable-modem0
> > 5631
> > - ip nat inside source route-map nonat interface cable-modem0 overload
> > ip classless
> > no ip http server
> > no ip http secure-server
> > no ip http cable-monitor
> >
> > It appears that the sort routine for NAT needs some augmentation to
order
> > non-static entries as well to try and forces these to appear either
before
> > or after the static ones. Any thoughts?
> >
> > There are two main types of entry I use for overloading:
> >
> > ip nat inside source list 1 interface cable-modem0 overload
> >
> > and
> >
> > ip nat inside source route-map nonat interface cable-modem0 overload
> >
> > The important (non-changing) bits are the "overload" and the "list" vs
> > "route-map".
> >
> > I'd like to augment the NAT/sort/ProcessHistory to force overloaded
> > statements to appear at the top of the NAT history.
> >
> > Also, I've noticed that I receive the following diff's regularly:
> >
> > retrieving revision 1.3
> > diff -U4 -r1.3 <FILENAME REMOVED>
> > @@ -76,12 +76,12 @@
> > no cable-modem compliant bridge
> > !
> > ip default-gateway <IP REMOVED>
> > ip nat inside source list 1 interface cable-modem0 overload
> > - ip nat inside source static udp 192.168.1.20 5632 interface
cable-modem0
> > 5632
> > ip nat inside source static udp 192.168.1.20 5631 interface
cable-modem0
> > 5631
> > - ip nat inside source static tcp 192.168.1.20 5631 interface
cable-modem0
> > 5631
> > + ip nat inside source static udp 192.168.1.20 5632 interface
cable-modem0
> > 5632
> > ip nat inside source static tcp 192.168.1.20 5632 interface
cable-modem0
> > 5632
> > + ip nat inside source static tcp 192.168.1.20 5631 interface
cable-modem0
> > 5631
> > ip classless
> > no ip http server
> > !
> > logging trap notifications
> >
> > Notice that no actual config changes have occured. The NAT sort routine
> only
> > sorts on IP with no consideration to the same IP having multiple ports
> being
> > translated. It should also sort on port (at least in my case I'd like
> this).
> >
> > Has anyone provided (or can provide) a way to augment the NAT sorting
> rules?
> > I'd like to reduce the amount of diff mails I receive, as I currenly
have
> a
> > few hundred of these out in the field and I constantly get diffs with no
> > real changes.
> >
> > Thank in advance,
> >
> > Rod.
> >
> >
> > Roderick B. Greening, B.Sc.
> > Manager, Provisioning & Technical Support
> > Atlantic Region
> > group telecom, a Bell Canada Company
> > 541 Kenmount Rd.
> > St. John's, NF
> > (709) 757-1328 (Office)
> > (709) 685-3681 (Mobile)
> > (709) 757-1201 (Fax)
> > rgreening at gt.ca
> >
> >
> >
More information about the Rancid-discuss
mailing list