[rancid] Cisco 3750's

[Walter Gould]

Anyone know why rancid might be hanging grabbing config's from Cisco
3750 switches?  I keep seeing hung rancid processes and all of the
switches are 3750's.  I run clogin and the script logins to them fine. 


This is what I see when I show the processes:

rancid   32398     1  0 12:42 ?        00:00:00 sh -c clogin -t 90 -c
"show version;show redundancy secondary;show idprom backplane;show
install active;show env all;show rsp chassis-info;show gsr chassis;show
boot;show bootvar;show variables boot;show flash;dir /all nvram:;dir
/all bootflash:;dir /all slot0:;dir /all disk0:;dir /all slot1:;dir /all
disk1:;dir /all slot2:;dir /all disk2:;dir /all harddisk:;dir /all
harddiska:;dir /all harddiskb:;dir /all sup-bootflash:;dir /all
sup-microcode:;dir /all slavenvram:;dir /all slavebootflash:;dir /all
slaveslot0:;dir /all slavedisk0:;dir /all slaveslot1:;dir /all
slavedisk1:;dir /all slaveslot2:;dir /all slavedisk2:;dir /all
slavesup-bootflash:;dir /all sec-nvram:;dir /all sec-bootflash:;dir /all
sec-slot0:;dir /all sec-disk0:;dir /all sec-slot1:;dir /all
sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show controllers;show
controllers cbus;show diagbus;show diag;show module;show spe
version;show c7200;show vtp status;show vlan;show running-config;write
term" 10.4.152.70 </dev/null

rancid   32399 32398  0 12:42 ?        00:00:01 /usr/local/bin/expect
-- /usr/local/rancid/bin/clogin -t 90 -c show version;show redundancy
secondary;show idprom backplane;show install active;show env all;show
rsp chassis-info;show gsr chassis;show boot;show bootvar;show variables
boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all slot0:;dir
/all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all
disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir
/all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir
/all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all
slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all
sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all
sec-disk2:;show controllers;show controllers cbus;show diagbus;show
diag;show module;show spe version;show c7200;show vtp status;show
vlan;show running-config;write term 10.4.152.70


Any thoughts or suggestions would be appreciated.

Walter Gould
Auburn University