jerancid failing on asterix's ?

[Mark Cooper]

Yup, its not a clogin issue, but a jerancid one.


rancid at lab-srv-001:~$ bin/clogin -c "show environment all" lab-bas-002
lab-bas-002
spawn telnet lab-bas-002
Trying 10.240.8.3...
Connected to lab-bas-002-mgt-lo0.
Escape character is '^]'.


Telnet password: *******
Logged in on vty 0 via telnet.
Copyright (c) 1999-2005 Juniper Networks, Inc.  All rights reserved.

lab-bas-002>enable
Password: *******
lab-bas-002#
lab-bas-002#term length 0
lab-bas-002#show environment all
    chassis: 14 slot (id 0x5, rev. 0xa)
    fabric: 40 Gbps (rev. 0)
    fans: fanSubsystemOk
*** nvs: near capacity (87%), matches running config
    power: A ok, B ok
*** srp redundancy: mode is high-availability, state disabled
        auto-sync enabled, switch-on-error enabled
        status unknown
*** slots: cards missing or offline
        online: 0 1 2 3 4 6 9 10 11 12
        standby: 8
        offline: 7
        empty: 5 13
    line redundancy: 1 redundancy group(s)
        width 6, spare 8, primary 9 10 11 12
    temperature: ok
    timing: primary
        primary: internal SC oscillator (ok)
        secondary: internal SC oscillator (ok)
        tertiary: internal SC oscillator (ok)
        auto-upgrade enabled

*** system operational: no

        processor     processor        IOA           IOA
       temperature   temperature   temperature   temperature
slot   (10C - 70C)     status      (10C - 70C)     status
----   -----------   -----------   -----------   -----------
0          32        normal            ---       unknown
1          32        normal            23        normal
2          34        normal            24        normal
3          32        normal            22        normal
4          35        normal            22        normal
6          29        normal            25        normal
8          32        normal            ---       unknown
9          33        normal            22        normal
10         35        normal            22        normal
11         36        normal            23        normal
12         36        normal            23        normal

processor temperature ranges
        below -5C is too cold
        above 80C is too hot
        low temperature warning below 10C
        high temperature warning above 70C
IOA temperature ranges
        below -5C is too cold
        above 80C is too hot
        low temperature warning below 10C
        high temperature warning above 70C
lab-bas-002#exit
Logging out.


Connection closed by foreign host.



On 1/10/06, john heasley <heas at shrubbery.net> wrote:
>
> Mon, Jan 09, 2006 at 02:31:53PM +0000, Mark Cooper:
> > Think I'm having problems with asterix's being returned in the 'show
> > environment all' command output ...
>
> though it does seem that there is a missing catch, i suspect its not the
> asterixs, rather it appears that the telnet died.  does clogin -c 'show
> environment all' work?
>
>