[rancid] Re: folded lines

[Lance Vermilion]

On Wed, Nov 01, 2006 at 01:12:53PM -0500, chen_daniel at emc.com wrote:
> Here's an idea,
> 
> It would seem that the IOS directive 'term width 0' just like the 'term
> length 0' prevents the paging.
> 
> Ooh, time to change the 'clogin' code near the 'term length 0' section.
> 
> I have 6509 with lots of vlan memberships that constantly change as
> ports link/unlink.
> 
> Regards,
> Daniel Chen
> 
> > -----Original Message-----
> > From: rancid-discuss-bounces at shrubbery.net [mailto:rancid-discuss-
> > bounces at shrubbery.net] On Behalf Of Lance Vermilion
> > Sent: Wednesday, November 01, 2006 10:39 AM
> > To: William Yardley
> > Cc: rancid-discuss at shrubbery.net
> > Subject: [rancid] Re: folded lines
> > 
> > On Tue, Oct 31, 2006 at 09:28:28PM -0800, William Yardley wrote:
> > > I have a Cisco 4948 and RANCID is repeatedly noticing the following
> > > difference: (squished down the columns a little to be a bit easier
> to
> > > read)
> > >
> > >   !VLAN: VLAN Name           Status   Ports
> > >   !VLAN: ---- -------------- --------
> -------------------------------
> > >
> > > - !VLAN: 1    default        active   Gi1/1, Gi1/2, Gi1/3, Gi1/4
> > > - !VLAN:                              Gi1/5, Gi1/6, Gi1/9, Gi1/10
> > > - !VLAN:                              Gi1/11, Gi1/13, Gi1/14, Gi1/15
> > > - !VLAN:                              Gi1/17, Gi1/18, Gi1/19, Gi1/21
> > > - !VLAN:                              Gi1/22, Gi1/23, Gi1/24, Gi1/25
> > > - !VLAN:                              Gi1/27, Gi1/29, Gi1/30, Gi1/31
> > > - !VLAN:                              Gi1/33, Gi1/35, Gi1/37, Gi1/39
> > > - !VLAN:                              Gi1/41, Gi1/42, Gi1/43, Gi1/44
> > > + !VLAN: 1    default        active   Gi1/1, Gi1/2, Gi1/3, Gi1/4,
> Gi1/5,
> > Gi1/6, Gi1/9, Gi1/10, Gi1/11, Gi1/13, Gi1/14, Gi1/15, Gi1/17,
> > > Gi1/18, Gi1/19, Gi1/21, Gi1/22, Gi1/23, Gi1/24, Gi1/25, Gi1/27,
> Gi1/29,
> > Gi1/30, Gi1/31, Gi1/33, Gi1/35, Gi1/37, Gi1/39, Gi1/41, Gi1/42,
> Gi1/43,
> > Gi1/44
> > >   !VLAN: 20   VLAN0020                         active    Gi1/45,
> Gi1/46,
> > Gi1/47, Gi1/48
> > >
> > > Each time it runs, the version that gets committed flip-flops. Am I
> > > missing something obvious?
> > >
> > > w
> > >
> > > _______________________________________________
> > > Rancid-discuss mailing list
> > > Rancid-discuss at shrubbery.net
> > > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> > 
> > I have that same problem. Anyone else solved this problem other than
> > ignoring !VLAN lines?
> > --
> > 
> > -Lance <rancid at gheek.net>
> > 
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> 
Chen,

Have you changed your code and had success with the changes?

-- 

-Lance <rancid at gheek.net>