[rancid] missed cmd(s): write term

Mon Oct 23 21:52:46 UTC 2006

Hi all! I suddenly started getting certain devices in my network not
updating in rancid. Only 5% of my routers fail but they all fail with the
same error "missed cmd(s): write term".

Anyone have any ideas why this would just start happening? Below is my
rancid debug test run on one device that fails, thanks.

--Scott

[rancid at ns4 rancid]$ /usr/local/rancid/bin/rancid -d border1.phx1

executing clogin -t 90 -c"admin show version;show version;show = redundancy
secondary;show idprom backplane;show install active;admin show env =
all;show env all;show rsp chassis-info;show gsr chassis;show diag =
chassis-info;show boot;show bootvar;admin show variables boot;show variables
boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all slot0:;dir /all
disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all = disk2:;dir
/all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all
sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir /all
slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all
slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all
sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all =
sec-disk2:;show controllers;show controllers cbus;show diagbus;admin show
diag;show diag;show module;show spe version;show c7200;show inventory
raw;show vtp status;show vlan;show vlan-switch;show debug;show
running-config;write = term"

border1.phx1

PROMPT MATCH: border1.phx1#

HIT COMMAND:border1.phx1#admin show version

    In ShowVersion: border1.phx1#admin show version

HIT COMMAND:border1.phx1#show version

    In ShowVersion: border1.phx1#show version

TYPE =3D 7200

HIT COMMAND:border1.phx1#show redundancy secondary

    In ShowRedundancy: border1.phx1#show redundancy secondary

HIT COMMAND:border1.phx1#show idprom backplane

    In ShowIDprom: border1.phx1#show idprom backplane

HIT COMMAND:border1.phx1#show install active

    In ShowInstallActive: border1.phx1#show install active

HIT COMMAND:border1.phx1#admin show env all

    In ShowEnv: border1.phx1#admin show env all

HIT COMMAND:border1.phx1#show env all

    In ShowEnv: border1.phx1#show env all

HIT COMMAND:border1.phx1#show rsp chassis-info

    In ShowRSP: border1.phx1#show rsp chassis-info

HIT COMMAND:border1.phx1#show gsr chassis

    In ShowGSR: border1.phx1#show gsr chassis

HIT COMMAND:border1.phx1#show diag chassis-info

    In ShowGSR: border1.phx1#show diag chassis-info

HIT COMMAND:border1.phx1#show boot

    In ShowBoot: border1.phx1#show boot

HIT COMMAND:border1.phx1#show bootvar

    In ShowBoot: border1.phx1#show bootvar

HIT COMMAND:border1.phx1#admin show variables boot

    In ShowBoot: border1.phx1#admin show variables boot

HIT COMMAND:border1.phx1#show variables boot

    In ShowBoot: border1.phx1#show variables boot

HIT COMMAND:border1.phx1#show flash

    In ShowFlash: border1.phx1#show flash

HIT COMMAND:border1.phx1#dir /all nvram:

    In DirSlotN: border1.phx1#dir /all nvram:

HIT COMMAND:border1.phx1#dir /all bootflash:

    In DirSlotN: border1.phx1#dir /all bootflash:

HIT COMMAND:border1.phx1#dir /all slot0:

    In DirSlotN: border1.phx1#dir /all slot0:

HIT COMMAND:border1.phx1#dir /all disk0:

    In DirSlotN: border1.phx1#dir /all disk0:

HIT COMMAND:border1.phx1#dir /all slot1:

    In DirSlotN: border1.phx1#dir /all slot1:

HIT COMMAND:border1.phx1#dir /all disk1:

    In DirSlotN: border1.phx1#dir /all disk1:

HIT COMMAND:border1.phx1#dir /all slot2:

    In DirSlotN: border1.phx1#dir /all slot2:

HIT COMMAND:border1.phx1#dir /all disk2:

    In DirSlotN: border1.phx1#dir /all disk2:

HIT COMMAND:border1.phx1#dir /all harddisk:

    In DirSlotN: border1.phx1#dir /all harddisk:

HIT COMMAND:border1.phx1#dir /all harddiska:

    In DirSlotN: border1.phx1#dir /all harddiska:

HIT COMMAND:border1.phx1#dir /all harddiskb:

    In DirSlotN: border1.phx1#dir /all harddiskb:

HIT COMMAND:border1.phx1#dir /all sup-bootflash:

    In DirSlotN: border1.phx1#dir /all sup-bootflash:

HIT COMMAND:border1.phx1#dir /all sup-microcode:

    In DirSlotN: border1.phx1#dir /all sup-microcode:

HIT COMMAND:border1.phx1#dir /all slavenvram:

    In DirSlotN: border1.phx1#dir /all slavenvram:

HIT COMMAND:border1.phx1#dir /all slavebootflash:

    In DirSlotN: border1.phx1#dir /all slavebootflash:

HIT COMMAND:border1.phx1#dir /all slaveslot0:

    In DirSlotN: border1.phx1#dir /all slaveslot0:

HIT COMMAND:border1.phx1#dir /all slavedisk0:

    In DirSlotN: border1.phx1#dir /all slavedisk0:

HIT COMMAND:border1.phx1#dir /all slaveslot1:

    In DirSlotN: border1.phx1#dir /all slaveslot1:

HIT COMMAND:border1.phx1#dir /all slavedisk1:

    In DirSlotN: border1.phx1#dir /all slavedisk1:

HIT COMMAND:border1.phx1#dir /all slaveslot2:

    In DirSlotN: border1.phx1#dir /all slaveslot2:

HIT COMMAND:border1.phx1#dir /all slavedisk2:

    In DirSlotN: border1.phx1#dir /all slavedisk2:

HIT COMMAND:border1.phx1#dir /all slavesup-bootflash:

    In DirSlotN: border1.phx1#dir /all slavesup-bootflash:

HIT COMMAND:border1.phx1#dir /all sec-nvram:

    In DirSlotN: border1.phx1#dir /all sec-nvram:

HIT COMMAND:border1.phx1#dir /all sec-bootflash:

    In DirSlotN: border1.phx1#dir /all sec-bootflash:

HIT COMMAND:border1.phx1#dir /all sec-slot0:

    In DirSlotN: border1.phx1#dir /all sec-slot0:

HIT COMMAND:border1.phx1#dir /all sec-disk0:

    In DirSlotN: border1.phx1#dir /all sec-disk0:

HIT COMMAND:border1.phx1#dir /all sec-slot1:

    In DirSlotN: border1.phx1#dir /all sec-slot1:

HIT COMMAND:border1.phx1#dir /all sec-disk1:

    In DirSlotN: border1.phx1#dir /all sec-disk1:

HIT COMMAND:border1.phx1#dir /all sec-slot2:

    In DirSlotN: border1.phx1#dir /all sec-slot2:

HIT COMMAND:border1.phx1#dir /all sec-disk2:

    In DirSlotN: border1.phx1#dir /all sec-disk2:

HIT COMMAND:border1.phx1#show controllers

    In ShowContAll: border1.phx1#show controllers

HIT COMMAND:border1.phx1#show controllers cbus

    In ShowContCbus: border1.phx1#show controllers cbus

HIT COMMAND:border1.phx1#show diagbus

    In ShowDiagbus: border1.phx1#show diagbus

HIT COMMAND:border1.phx1#admin show diag

    In ShowDiag: border1.phx1#admin show diag

HIT COMMAND:border1.phx1#show diag

    In ShowDiag: border1.phx1#show diag

HIT COMMAND:border1.phx1#show module

    In ShowModule: border1.phx1#show module

HIT COMMAND:border1.phx1#show spe version

    In ShowSpeVersion: border1.phx1#show spe version

HIT COMMAND:border1.phx1#show c7200

    In ShowC7200: border1.phx1#show c7200

HIT COMMAND:border1.phx1#show inventory raw

    In ShowInventory: border1.phx1#show inventory raw

HIT COMMAND:border1.phx1#show vtp status

    In ShowVTP: border1.phx1#show vtp status

HIT COMMAND:border1.phx1#show vlan

    In ShowVLAN: border1.phx1#show vlan

HIT COMMAND:border1.phx1#show vlan-switch

    In ShowVLAN: border1.phx1#show vlan-switch

HIT COMMAND:border1.phx1#show debug

    In ShowDebug: border1.phx1#show debug

HIT COMMAND:border1.phx1#show running-config

    In WriteTerm: border1.phx1#show running-config

border1.phx1: missed cmd(s): write term

border1.phx1: missed cmd(s): write term

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.0.408 / Virus Database: 268.13.4/476 - Release Date: 10/14/2006

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20061023/c7937bcc/attachment.html 