[rancid] Re: Connecting to a Cisco Service Control Engine

[Sherrill, Justin]

In this case, it doesn't work.  Since the normal prompt includes '>', it
goes into a loop.  It looks like without the normal prompt, it never
leaves the login loop.

-----------------------------------------
Justin C. Sherrill - CURRENT Communications
220 Kenneth Drive
Rochester, New York 14623
P: 585.486.0549 F: 585.486.0030

-----Original Message-----
From: Manuel Noriega [mailto:mnoriega at amnetcorp.com] 
Sent: Friday, January 26, 2007 1:53 PM
To: Sherrill, Justin
Cc: rancid-discuss at shrubbery.net
Subject: Re: [rancid] Connecting to a Cisco Service Control Engine

I had a similar situation with Tellabs equipment which don't ask for  
user or password and login immediately. What I used in .cloginrc was:

add userprompt  tellabs* ">"

I guess in your case something similar may work using

add enableprompt  10.0.0.1 ">"



Sincerely,

Manuel Noriega
ISP Engineer



***CONFIDENTIALITY NOTICE***
The information in this email may be confidential and/or privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this message from your system.