[rancid] RcsDiff Problem With Juniper Router

[Ho Siew Fah]

Hello group,

Sometimes, the diff command shows the following "show chassis environment"
from my juniper router even after I had changed my interface configuration
in this router. I expect the diff command shows the changes I have made to
the interface, but instead it just show the difference in the environment. I
have to execute rancid-run again in order to get the configuration change I
have made.

Can anyone tell me how to solve this problem without running the rancid-run
command again?

Also, is there a way to change the time setting in the ouput of the rcsdiff?
I have adeded the command TZ=SGT and export TZ in the rancid.conf file, but
it seems that is not working.

Thank you.

RCS file: /usr/local/var/rancid/CVS/ix/configs/sbt-cr2.ix.sing.com,v
retrieving revision 1.121
retrieving revision 1.122
diff -c -r1.121 -r1.122
*** sbt-cr2.ix.singtel.com    2007/06/30 16:11:40     1.121
--- sbt-cr2.ix.singtel.com    2007/06/30 21:39:24     1.122
***************
*** 2,8 ****
  #
  # sbt-cr2-re1> show chassis clocks
  # Clock     State                           Measured frequency
! # PCG 0     Online - Master clock           124.95 MHz
  # PCG 1     Online - Standby                124.96 MHz
  #
  # sbt-cr2-re1> show chassis environment
--- 2,8 ----
  #
  # sbt-re1> show chassis clocks
  # Clock     State                           Measured frequency
! # PCG 0     Online - Master clock           124.96 MHz
  # PCG 1     Online - Standby                124.96 MHz
  #
  # sbt-cr2-re1> show chassis environment
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20070711/f17c57ce/attachment.html