[rancid] Re: GSR 12k - sho diag / missing subslot spa info

[Elliott, Andrew]

> > Hello,
> > 
> > I have been recently asked that my router backups include 
> the SUBSLOT
> > line from 'sho diag' on the 12k's.
> > 
> > Here is an example (trimmed for brevity) of the output I 
> want rancid to
> > parse:
> > 
> > SLOT 1  (RP/LC 1 ): Modular SPA Interface Card (10G)
> > -snip-
> > 
> >   SPA Information:
> >         subslot 1/0: SPA-10X1GE-V2 (0x508), status is ok
> >         subslot 1/1: Empty
> >         subslot 1/2: Empty
> >         subslot 1/3: Empty
> > 
> > SUBSLOT  1/0 (SPA-10X1GE-V2): 10-port Gigabit Ethernet Shared Port
> > Adapter
> >         Product Identifier (PID) : SPA-10X1GE-V2
> > -snip-
> > 
> > This is a new card type that we have recently begun deploying, and
> > currently all that is backed up is the main SPA IC 
> information, not the
> > info on the "SUBSLOT" or "SPA -> subslot" lines.
> 
> I'd need to have the complete output; I don't have GSRs anymore.
>
CHR1.NYC-NY#sho diag 1

SLOT 1  (RP/LC 1 ): Modular SPA Interface Card (10G)
  MAIN: type 149,  00-0000-00 rev A0
        Deviation:  D090170
        HW config: 0x20    SW key: 00-00-00
  PCA:  00-00000-00 rev A0 ver 4
        Design Release 1.0  S/N SAD000000M0
  MBUS: Embedded Agent
        Test hist: 0x00    RMA#: 00-00-00    RMA hist: 0x00
  DIAG: Test count: 0x00000000    Test results: 0x00000000
  FRU:  Linecard/Module: 12000-SIP-601=
        Processor Memory: MEM-LC5-2048=(Non-Replaceable)
        Packet Memory: MEM-LC5-PKT-256=(Non-Replaceable)
  L3 Engine: 5 - ISE 10 Gbps
  MBUS Agent Software version 2.51 (RAM) (ROM version is 3.50)
  ROM Monitor version 17.1
  Fabric Downloader version used 4.1 (ROM version is 4.1)
  Primary clock is CSC 1
  Board is analyzed
  Board State is Line Card Enabled (IOS  RUN )
  Insertion time: 00:22:52 (2w4d ago)
  Processor Memory size: 2147483648 bytes
  TX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 32768
bytes
  RX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 32768
bytes
  0 crashes since restart

  SPA Information:
        subslot 1/0: SPA-10X1GE-V2 (0x508), status is ok
        subslot 1/1: Empty
        subslot 1/2: Empty
        subslot 1/3: Empty
CHR1.NYC-NY#

> 
> > It is possible I am using a version of rancid that needs to 
> be upgraded
> > and/or patched.  
> 
> possibly.  'show inventory' has been added and that ought to 
> include this
> information...if cisco has gotten around to adding it to this platform
> yet.
> 

Looks like this might be the best way to go.  From the show inventory:

NAME: "slot 1", DESCR: "ISE 10G Modular Services Card v2"
PID: 12000-SIP-601     , VID: V02, SN: SAD111403M0

NAME: "SPA subslot 1/0", DESCR: "10-port Gigabit Ethernet Shared Port
Adapter"
PID: SPA-10X1GE-V2     , VID: V01, SN: JAB111701NG