[rancid] Re: accessing routers from another router

Aditya Anand aanand at uebiz.net
Fri Mar 2 16:54:13 UTC 2007 

See the output of login to a device from the rancid box...

 

[rancid at netscreen1 ~]$ /usr/local/rancid/bin/clogin -f /usr/local/rancid/.cloginrc -u rancid 10.100.3.3

10.100.3.3

spawn telnet 10.100.3.3

Trying 10.100.3.3...

Connected to 10.100.3.3 (10.100.3.3).

Escape character is '^]'.

 

 

User Access Verification

 

Username: rancid

Password:

 

SACNCD02#

 

 

 

sh run

 

 

Error: TIMEOUT reached

[rancid at netscreen1 ~]$

[rancid at netscreen1 ~]$

[rancid at netscreen1 ~]$

[rancid at netscreen1 ~]$

[rancid at netscreen1 ~]$ sh run

sh: run: No such file or directory

 

 

Does not any further.....DOES NOT RUN ANYTHING.........Please advise......

 

 

 

-----Original Message-----
From: Gary Roberts [mailto:groberts at hcis.net] 
Sent: Friday, March 02, 2007 11:15 AM
To: Aditya Anand
Subject: Re: [rancid] Re: accessing routers from another router

 

Trying to get all of the configs.

 

10.10.100.1 clogin error: Error: Check your passwd for 10.10.100.1

 

 

It appears, judging by the second line in the log, that you have an 

incorrect password in your /rancid/.cloginrc file

 

 

 

 

Aditya Anand wrote:

> 

> Hi All,

> 

> I am having problems setting up rancid. I am doing it for the first 

> time , so not much experience with it. Please help. I can login to the 

> device from rancid, however cannot pull the configs. It gives error if 

> I see the logs......

> 

> *PLEASE HELP IF SOMEBODY CAN..................*

> 

> Trying to get all of the configs.

> 

> 10.10.100.1 clogin error: Error: Check your passwd for 10.10.100.1

> 

> 10.10.100.1: missed cmd(s): admin show diag,dir /all slavedisk2:,show 

> rsp chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show 

> gsr chassis,dir /all sec-nvram:,show di

> 

> ag chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe 

> version,dir /all slaveslot2:,dir /all disk0:,show install active,show 

> bootvar,dir /all slaveslot0:,dir /all sec-

> 

> slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all 

> sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all 

> harddiskb:,show variables boot,show boot

> 

> ,show inventory raw,dir /all slavedisk1:,show env all,show 

> module,admin show env all,show controllers,admin show version,show 

> diagbus,dir /all slavedisk0:,show debug,show idprom

> 

> backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all 

> sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all 

> slot2:,dir /all harddisk:,dir /all slot0:,dir

> 

> /all sup-microcode:,show vlan,dir /all slavebootflash:,show 

> controllers cbus,dir /all slaveslot1:,dir /all nvram:,show 

> version,show vlan-switch,admin show variables boot,show re

> 

> dundancy secondary,show running-config,show c7200,dir /all slot1:

> 

> 10.10.100.1: End of run not found

> 

> !

> 

> 10.10.1.11 clogin error: Error: Check your passwd for 10.10.1.11

> 

> 10.10.1.11: missed cmd(s): admin show diag,dir /all slavedisk2:,show 

> rsp chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show 

> gsr chassis,dir /all sec-nvram:,show dia

> 

> g chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe 

> version,dir /all slaveslot2:,dir /all disk0:,show install active,show 

> bootvar,dir /all slaveslot0:,dir /all sec-s

> 

> lot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all 

> sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all 

> harddiskb:,show variables boot,show boot,

> 

> show inventory raw,dir /all slavedisk1:,show env all,show module,admin 

> show env all,show controllers,admin show version,show diagbus,dir /all 

> slavedisk0:,show debug,show idprom

> 

> backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all 

> sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all 

> slot2:,dir /all harddisk:,dir /all slot0:,dir /

> 

> all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers 

> cbus,dir /all slaveslot1:,dir /all nvram:,show version,show 

> vlan-switch,admin show variables boot,show red

> 

> undancy secondary,show running-config,show c7200,dir /all slot1:

> 

> 10.10.1.11: End of run not found

> 

> !

> 

> 10.10.64.175 nlogin error: Error: Check your passwd for 10.10.64.175

> 

> 10.10.64.175: missed cmd(s): get system,get conf

> 

> 10.10.64.175: End of run not found

> 

> #

> 

> 10.10.1.152 nlogin error: Error: TIMEOUT reached

> 

> 10.10.1.152: missed cmd(s): get system,get conf

> 

> 10.10.1.152: End of run not found

> 

> 10.10.64.146 nlogin error: Error: TIMEOUT reached

> 

> 10.10.64.146: missed cmd(s): get system,get conf

> 

> 10.10.64.146: End of run not found

> 

> #

> 

> #

> 

> 10.10.1.183 nlogin error: Error: TIMEOUT reached

> 

> 10.10.1.183: missed cmd(s): get system,get conf

> 

> 10.10.1.183: End of run not found

> 

> #

> 

> 10.100.16.140 clogin error: Error: Couldn't login: 10.100.16.140

> 

> 10.100.16.140: missed cmd(s): admin show diag,dir /all 

> slavedisk2:,show rsp chassis-info,dir /all sec-slot2:,show diag,dir 

> /all disk1:,show gsr chassis,dir /all sec-nvram:,show

> 

> diag chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe 

> version,dir /all slaveslot2:,dir /all disk0:,show install active,show 

> bootvar,dir /all slaveslot0:,dir /all se

> 

> c-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all 

> sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all 

> harddiskb:,show variables boot,show bo

> 

> ot,show inventory raw,dir /all slavedisk1:,show env all,show 

> module,admin show env all,show controllers,admin show version,show 

> diagbus,dir /all slavedisk0:,show debug,show idpr

> 

> om backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all 

> sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all 

> slot2:,dir /all harddisk:,dir /all slot0:,di

> 

> r /all sup-microcode:,show vlan,dir /all slavebootflash:,show 

> controllers cbus,dir /all slaveslot1:,dir /all nvram:,show 

> version,show vlan-switch,admin show variables boot,show

> 

> redundancy secondary,show running-config,show c7200,dir /all slot1:

> 

> ------------------------------------------------------------------------

> 

> *From:* rancid-discuss-bounces at shrubbery.net 

> [mailto:rancid-discuss-bounces at shrubbery.net] *On Behalf Of *Boštjan Fele

> *Sent:* Tuesday, February 27, 2007 11:21 PM

> *To:* rancid-discuss at shrubbery.net

> *Subject:* [rancid] accessing routers from another router

> 

> Hi everyone,

> 

> I need to collect the config from routers that are not directly 

> reachable by the host that rancid runs on. I can ssh to the first 

> router, then telnet to the ones that I need the config from.

> 

> Was searching mailing list and found two threads but none of them 

> works for me.

> 

> http://www.shrubbery.net/pipermail/rancid-discuss/2004-November/000905.html

> 

> http://www.shrubbery.net/pipermail/rancid-discuss/2006-May/001490.html

> 

> Does anybody have implemented hop-by-hop accessing to the routers?

> 

> Bostjan

> 

> ------------------------------------------------------------------------

> 

> _______________________________________________

> Rancid-discuss mailing list

> Rancid-discuss at shrubbery.net

> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20070302/2c58a9da/attachment.html

More information about the Rancid-discuss mailing list