[rancid] Re: Fwd: Dell Powerconnects

[Chris Gauthier]

Yes, some of the HP Procurve line IS actually OEM'd by Foundry, though a 
recent conversation at the recent Angelbeat conference enlightened me to 
the fact that HP is now making all of their own stuff.

Chris


john heasley wrote:
> right.  the dells I've seen were actually SMC OEMs, but like *some* of the
> HP procurve series, this one appears that it may be a foundry.  It is hard
> to say without seeing the config [and other output].
>
> Fri, Nov 02, 2007 at 10:12:57AM -0700, Chris Gauthier:
>   
>> A possibility that might be happening is that if, as I suspect, the 
>> switch is OEM'd from Foundry, that SSH is not fully implemented.  That 
>> has been the case on some Foundry switches I have used.  I do not know 
>> who the OEM for Dell's networking gear is, though.
>>
>> Chris Gauthier, CCNA, Network+, A+
>> Network Administration Team
>> Portland Community College
>> Portland, Oregon
>>
>> "For once you have tasted flight you will walk the earth with your eyes 
>> turned skywards, for there you have been and there you will long to return."
>> --Leonardo da Vinci
>>
>>
>>
>> Lance wrote:
>>     
>>> Login to the box via ssh tom at 172.16.10.161. After getting logged in
>>> enable. Then log off. Then use a login script to attempt to connect to
>>> the same box "172.16.10.161". Make sure to capture all the output from
>>> all of that then post back to the list and we might be able to help
>>> more.
>>>
>>> After this we can then try to debug if it is not clear enough...assuming
>>> the login script you are using supports the debug switch.
>>>
>>> -lance
>>>
>>>  
>>>       
>>>> -------- Original Message --------
>>>> Subject: [rancid] Re: Fwd: Dell Powerconnects
>>>> From: PhaNtoX <phantox at gmail.com>
>>>> Date: Fri, November 02, 2007 8:25 am
>>>> To: rancid-discuss at shrubbery.net
>>>> Setup ssh on the switch, verifed I can ssh into the switch with the user 
>>>> and
>>>> password from the rancid box.  However when i try to manually kick off
>>>> srancid or rancid-run im still getting on the switch. If i try kicking off
>>>> flogin it connects fine however, I also modified srancid to try to use
>>>> flogin vs hlogin that actually logs into the switch but fails to go 
>>>> anywhere
>>>> else. Any other idea's
>>>> "new ssh connection for user unKnown, source 172.16.10.160 (rancid box)"
>>>> add autoenable 172.16.10.161 1
>>>> add method 172.16.10.161 ssh
>>>> add user 172.16.10.161 admin
>>>> add password 172.16.10.161 password
>>>> On 11/2/07, Lance <rancid at gheek.net> wrote:
>>>>    
>>>>         
>>>>> It looks like ssh is denied or you have the wrong username/password.
>>>>> Make sure you can ssh with that username and password from the same
>>>>> machine you are running rancid from.
>>>>>
>>>>> -Lance
>>>>>
>>>>>      
>>>>>           
>>>>>> -------- Original Message --------
>>>>>> Subject: [rancid]  Fwd:  Dell Powerconnects
>>>>>> From: PhaNtoX <phantox at gmail.com>
>>>>>> Date: Thu, November 01, 2007 1:22 pm
>>>>>> To: rancid-discuss at shrubbery.net
>>>>>> Just tried this and it doesn't seem to be working im getting this in my
>>>>>> logs.
>>>>>> Trying to get all of the configs.
>>>>>> 172.16.10.161 dlogin error: Error: Connection Refused (ssh)
>>>>>> 172.16.10.161: missed cmd(s): show version,show system,show
>>>>>> running-config,show vlan,dir
>>>>>> 0: found end
>>>>>> 172.16.10.161: End of run not found
>>>>>> !
>>>>>> =====================================
>>>>>> Look at the activity on the switch itself its getting a telnet
>>>>>>        
>>>>>>             
>>>>> connection
>>>>>      
>>>>>           
>>>>>> for user unKnown
>>>>>> my .cloginrc looks like this
>>>>>> add autoenable 172.16.10.161 1
>>>>>> add user 172.16.10.161 admin
>>>>>> add password 172.16.10.161 password
>>>>>> my router.db looks like this
>>>>>> 172.16.10.161:smc:up
>>>>>> And yes this is a cisco like
>>>>>>        
>>>>>>             
>>>>> CLI<hr>_______________________________________________
>>>>>      
>>>>>           
>>>>>> Rancid-discuss mailing list
>>>>>> Rancid-discuss at shrubbery.net
>>>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>>>>        
>>>>>>             
>>>>> <hr>_______________________________________________
>>>>>      
>>>>>           
>>>> Rancid-discuss mailing list
>>>> Rancid-discuss at shrubbery.net
>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>>    
>>>>         
>>> _______________________________________________
>>> Rancid-discuss mailing list
>>> Rancid-discuss at shrubbery.net
>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>  
>>>       
>
>   
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>     
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>   

-- 
Chris Gauthier, CCNA, Network+, A+
Network Administration Team
Portland Community College
Portland, Oregon

"For once you have tasted flight you will walk the earth with your eyes turned skywards, for there you have been and there you will long to return."
--Leonardo da Vinci

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20071105/7ba1cbd8/attachment.html