[rancid] Re: ASA Timeouts

[Lance]

Todd,

Make sure you don't have a * mentioned above those lines.

add method * {telent} {ssh}

I use the above when rancid runs because I have some PIXes that just
don't like expect running ssh from cron.

-lance

> -------- Original Message --------
> From: "Todd Heide" <Todd at equivoice.com>
> Date: Tue, October 09, 2007 1:04 pm
> To: "Lance" <rancid at gheek.net>
> Cc: <rancid-discuss at shrubbery.net>
> 
> 
> Yep, trying everything under the rancid user login. When I run
> bin/clogin <ipaddress> it doesn't appear to be sending the password in
> the .cloginrc file.
> 
> I have the entries
> 
> Add password {telnetpd} {enablepd}
> Add method	 <ip address> telnet
> 
> For the ASA, when I try bin/clogin, it spawns telnet instead of SSH. 
> 
> Entries are
> 
> add autoenable  <ip address>    0
> add user        <ip address>    rancid
> add cyphertype                  des
> add password    <ip address>    {passwd}        {passwd}
> add method      <ip address>    ssh
> 
> I do see updates on some devices, and not on others. 
> 
> If I just do either a telnet or ssh session under rancid user, I can
> connect OK, so I know the user/passwords are OK. 
> 
> Thanks
> 
> -----Original Message-----
> From: Lance [mailto:rancid at gheek.net] 
> Sent: Tuesday, October 09, 2007 2:47 PM
> To: Todd Heide
> Cc: rancid-discuss at shrubbery.net
> Subject: RE: [rancid] ASA Timeouts
> 
> Todd,
> 
> Have you tried "sudo su - <rancid user>" and then "source
> etc/rancid.conf" and then last but not least tried to connect to the
> devices after you have all the environmentals?
> 
> -lance
> 
> > -------- Original Message --------
> > From: "Todd Heide" <Todd at equivoice.com>
> > Date: Tue, October 09, 2007 10:17 am
> > To: <rancid-discuss at shrubbery.net>
> > 
> > 
> > I have a weird problem, on a few ASA devices I get timeouts "clogin
> > error: Error: TIMEOUT reached", yet from the command I can easily ssh
> > into the devices, so I know it isn't a connectivity issue. I can login
> > using the credentials in the .cloginrc file, and use the same setup
> for
> > all the PIX/ASA logins save for the IP address, some work, some
> don't.<hr>_______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss