[rancid] Re: Cisco PIX / ASA Activation key ?

[Brian Ipsen]

Hi,

The pix is running 6.3(5)

My dump file for this device looks like:

!RANCID-CONTENT-TYPE: cisco
!
!Chassis type: PIX-501 - a PIX
!CPU: Am5x86 133 MHz
!
!Memory: 16 MB RAM
!This PIX has a Restricted (R) license.
!Serial Number: xxxxxxxxxxxxxxxxxxxxxxx
!
!
!
!Image: Compiled: on Thu 04-Aug-05 21:40 by morlee
!
!
!
!Flash: flash file system:  version:3  magic:0x12345679
!Flash:   file 0: origin:       0 length:1978424
!Flash:   file 1: origin: 2097152 length:6650
!Flash:   file 2: origin: 2228224 length:1925
!Flash:   file 3: origin: 2359296 length:3152452
!Flash:   file 4: origin:       0 length:0
!Flash:   file 5: origin: 7864320 length:308
!
!
: Saved
:

Show version reveals:

Running Activation Key: 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa


And for Cisco ASA:

!RANCID-CONTENT-TYPE: cisco
!
!Chassis type: ASA5510 - a PIX
!CPU: Pentium 4 Celeron 1600 MHz
!
!Memory: 256 MB RAM
!Serial Number:xxxxxxxxxx
!
!
!
!Image: Compiled: on Wed 22-Nov-06 14:16 by builders
!Image: disk0:/asa722-k8.bin
!
!
!
!
!BootFlash: BOOT variable = disk0:/asa722-k8.bin
!BootFlash: Current BOOT variable = disk0:/asa722-k8.bin
!BootFlash: CONFIG_FILE variable =
!BootFlash: Current CONFIG_FILE variable =
!
!BootFlash: BOOT variable = disk0:/asa722-k8.bin
!BootFlash: Current BOOT variable = disk0:/asa722-k8.bin
!BootFlash: CONFIG_FILE variable =
!BootFlash: Current CONFIG_FILE variable =
!
!Flash: -#- --length-- -----date/time------ path
!Flash:   8 8312832    Dec 04 2006 07:00:14 asa722-k8.bin
!Flash:   9 5623108    Dec 04 2006 07:07:22 asdm-522.bin
!Flash: 241418240 bytes available (14008320 bytes used)
!
!Flash: disk0: Directory of disk0:/
!Flash: disk0: 8      -rw-  8312832     07:00:14 Dec 04 2006  asa722-k8.bin
!Flash: disk0: 9      -rw-  5623108     07:07:22 Dec 04 2006  asdm-522.bin
!Flash: disk0: 255426560 bytes total (241418240 bytes free)
!
!
!Slot 0: hvers 1.1, firmware 1.0(11)2, sw 7.2(2)
!

And "Show version" for the ASA:

Running Activation Key: 0xbbbbbbbbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbbbbb


Med venlig hilsen / Kind regards
Brian Ipsen

RackPeople ApS
Dynamovej 11C, 2 sal
DK-2730 Herlev

Mobil:   +45 25 41 49 13
Tel:   +45 70 25 35 90
Fax:   +45 70 25 35 91
Support:   +45 70 26 27 02
Internet: www.rackpeople.dk
Email: bi at rackpeople.dk

___________________________________


-----Original Message-----
From: Regnar Bang Lyngsø [mailto:regnar.lyngso at aak.com]
Sent: 29. januar 2008 12:50
To: Brian Ipsen
Cc: rancid-discuss at shrubbery.net; rancid-discuss-bounces at shrubbery.net
Subject: Re: [rancid] Cisco PIX / ASA Activation key ?

rancid-discuss-bounces at shrubbery.net wrote on 29-01-2008 12:20:15:

>  Looking through the code, I can see, that there are something
> listed with activations keys ? but these are not listed as comments
> in my PIX/ASA configuration dumps?

Using which version of rancid? Which PIX version?

On PIX 6.3:

!RANCID-CONTENT-TYPE: cisco
!This PIX has an Unrestricted (UR) license.
!Key: 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa

Rancid parses the information from the command "show version". Is the
activation code listed as "Activation Key: 0xaaaaaaaa 0xaaaaaaaa
0xaaaaaaaa 0xaaaaaaaa" when issuing "show version" on your
platform/software version?

Regards,
--
Regnar Bang Lyngsø, Network Administrator
AarhusKarlshamn Denmark A/S
M.P. Bruuns Gade 27, DK-8000 Århus C, Denmark
Email: mailto:regnar.lyngso at aak.com
Phone: +45 87 30 61 65 Mobile: +45 40 45 08 89
Registered office: Aarhus Reg. no: 15672099