[rancid] Re: clogin password

[Smirnoff Alexander]

Huh, really i have not 3 , but ~1000 cisco routers, and in this case i
need describe all routers what don't ask Username: in .cloginrc , or
setup AAA on routers - it's a though task , and i want avoid it by such
.cloginrc configuration what consider all devices - with Username and
without. 

-----Original Message-----
From: Gregory W Zill [mailto:gregoryzill at solutionary.com] 
Sent: Tuesday, July 29, 2008 6:38 PM
To: Smirnoff Alexander
Cc: rancid-discuss at shrubbery.net
Subject: Re: [rancid] Re: clogin password

Further, in the .cloginrc file, the generic lines you currently have 
will serve two out of three routers, so for the third, specifically add

   add user router201 admin
   add password router201 g00dpa55w0rd

where your routers might be distinguished as
   router101
   router102
   router 201

The router101 and router 102 will follow the * entries you have and the 
router201 will follow the more specific entries.

Martin, Seth wrote:
> You need to configure your line statements to use login local
(assuming
> the users are setup in ios and not using remote AAA)
> 
> Should be at the bottom of your routers configuration
> 
> line vty 0 4
>  login local
> 
> _____________________________________________________________________
> Seth Martin 
> - Desk: 239-949-4450 x6705 - Cell: 239-588-0681 - Fax: 239-495-5181 -
> 
> -----Original Message-----
> From: rancid-discuss-bounces at shrubbery.net
> [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Smirnoff
> Alexander
> Sent: Tuesday, July 29, 2008 3:07 AM
> To: rancid-discuss at shrubbery.net
> Subject: [rancid] Re: clogin password
> 
> I try to explain more. For example I have 3 cisco routers. All have
same
> password and username, but one router ask only password. Now I use
this
> .clorginrc:
> 
> #all routers
> add user * user
> add password * password enablepassword
> 
> And RANCID can login only to 2 cisco's what ask username, third cisco
> ask only password, and RANCID can't login.
> 
> What I need to change in .cloginrc for login to third Cisco?
> 
> 
> -----Original Message-----
> From: john heasley [mailto:heas at shrubbery.net] 
> Sent: Friday, July 25, 2008 9:27 PM
> To: Smirnoff Alexander
> Cc: rancid-discuss at shrubbery.net
> Subject: Re: [rancid] clogin password
> 
> Fri, Jul 25, 2008 at 10:27:42AM +0400, Smirnoff Alexander:
>> Hello!
>>
>>  
>>
>> I have a lot of cisco devices, and RANCID collect configurations from
>> them.  I use this clogin configuration:
>>
>>  
>>
>> #all routers
>>
>> add user * user
>>
>> add password * password enablepassword
>>
>>  
>>
>> But some devices not ask Username - only password. How I can setup
>> clogin , for trying directly password,
> 
> If the passwords are the same, then this should work.  if it doesn't
> ask for a username, one simply won't be given.
> 
>> then router not ask username, without selecting all this routers int
>> .cloginrc?
> 
> i don't understand that last bit.
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

-- 
gregory w zill, mba, cissp
Information Security Engineer
Managed Services Team
-----------------------------
Solutionary, Inc.
Making Security Manageable
v: 402-361-3066