[rancid] Re: Can't poll a cat5 switch. clogin works fine manually

Wed Jun 18 07:35:55 UTC 2008

Hi,

Looks like that worked though as all you are doing with that command is
logging in. Remember clogin is only the login mechanism.

Try the following

clogin 10.10.10.7 -c "show version"

That should login, go into enable mode, do a show version, and exit.

On Tue, Jun 17, 2008 at 11:07 PM, Victor Breen <victor at impulse.net> wrote:

> Seth,
>
> I added the "add autoenable 10.10.10.7 0" line but it didn't change how
> it's behaving.
>
> I have included the terminal output for scrutiny.  After it enables, an
> additional carriage return is being sent with no command, then it hangs
> until I manually kill it.
>
>
> rancid$ /usr/local/rancid/bin/clogin 10.10.10.7
> 10.10.10.7
> spawn telnet 10.10.10.7
> Trying 10.10.10.7...
> Connected to 10.10.10.7
> Escape character is '^]'.
>
>
> Cisco Systems, Inc. Console
>
>
>
>
> Username: rancid
>
>
> Password:
> sw2> enable
>
> Password:
> sw2> (enable)
> sw2> (enable)
>
>
>
>
> Anything else I could be missing?
>
> Thanks again!
>
>
> -- Victor
>
>
>
> ----- Original Message -----
> From: "Seth Martin" <SMartin at sourceinterlink.com>
> To: "Victor Breen" <victor at impulse.net>, "Gareth Hopkins" <
> gabbawp at gmail.com>
> Cc: rancid-discuss at shrubbery.net
> Sent: Tuesday, June 17, 2008 1:54:46 PM GMT -08:00 US/Canada Pacific
> Subject: RE: [rancid] Re: Can't poll a cat5 switch. clogin works fine
> manually
>
> add autoenable 10.10.10.7 0
>
> If you are logging in with a privileged user then you don't have to
> enable.  But if your clogin gets an unprivileged prompt then you need to
> turn off autoenable for the host.
>
> _____________________________________________________________________
> Seth Martin
>
>
> -----Original Message-----
> From: rancid-discuss-bounces at shrubbery.net
> [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Victor Breen
> Sent: Tuesday, June 17, 2008 4:48 PM
> To: Gareth Hopkins
> Cc: rancid-discuss at shrubbery.net
> Subject: [rancid] Re: Can't poll a cat5 switch. clogin works fine
> manually
>
> Hi Gareth,
>
> I'd rather not send the entire file, of course.  It contains about 200
> user/pass combos for different routers ;>)
>
> I ran "clogin 10.10.10.7" and it definitely failed to work without all
> of the arguments.  Here are the only lines I'm using now.
>
> add user 10.10.10.7      {rancid}
> add password 10.10.10.7  {Masked}      {Masked}
> add method 10.10.10.7    telnet
>
> The current behavior using clogin with no extra args is it logs in with
> the "rancid" username, gets to the unprivileged prompt, it types
> "enable" and enters the password then it hangs there.  I'm not sure why
> it's doing that.
>
> Thanks for your help!
>
>
> --Victor
>
>
>
> ----- Original Message -----
> From: "Gareth Hopkins" <gabbawp at gmail.com>
> To: "Victor Breen" <victor at impulse.net>
> Cc: rancid-discuss at shrubbery.net
> Sent: Tuesday, June 17, 2008 1:10:50 PM GMT -08:00 US/Canada Pacific
> Subject: Re: [rancid] Can't poll a cat5 switch. clogin works fine
> manually
>
> Hi,
>
> What does your .cloginrc file look like? I'd hazard a guess that
> something is missing in there.
>
> The following config should work for your device
>
> add user 10.10.10.7 username
> add password 10.10.10.7 {password}
> add autoenable 10.10.10.7 1
>
> You can always run clogin 10.10.10.7 (without all the options) to see if
> your .cloginrc file is being used correctly.
>
> Cheers,
>
> Gabba
>
>
> On Tue, Jun 17, 2008 at 9:58 PM, Victor Breen < victor at impulse.net >
> wrote:
>
>
> Hello!
>
> I am having some pretty aggravating issues getting a Cisco Cat switch
> working in Rancid. Perhaps I'm missing something dumb? I'm hoping
> someone out there can hit me with the clue-by-four.
>
> I am using Rancid 2.3.1 on a FreeBSD box. The "cisco" devices I have set
> up poll just fine. This is the only cat5 device I'm attempting to poll
> so I can't say I've ever gotten one to work before. Just the same,
> clogin seems to work when I run it manually.
>
> Here's an example of clogin working fine with the cat5 switch. It does
> complete but I've snipped the output for less noise:
>
>
>
> rancid$ /usr/local/rancid/bin/clogin -autoenable -c "write term" -f
> /home/rancid/.cloginrc -u rancid -p (masked) -t 30
> 10.10.10.7
>
> spawn telnet 10.10.10.7
> Trying 10.10.10.7...
> Connected to 10.10.10.7 .
> Escape character is '^]'.
>
>
> Cisco Systems, Inc. Console
>
>
>
>
> Username: rancid
>
>
> Password:
> sw2> (enable)
> sw2> (enable) set length 0
> Screen length for this session set to 0.
> sw2> (enable) set logging session disable
> System logging messages will not be sent to the current login session.
> sw2> (enable)
> sw2> (enable)write term
> This command shows non-default configurations only.
> Use 'write terminal all' to show both default and non-default
> configurations.
> .................
>
> .............................
> .............................
> .
>
> begin
> !
> # ***** NON-DEFAULT CONFIGURATION *****
> !
> !
> #time: Mon Jun 16 2008, 23:43:28
> !
> #version 8.4(11)GLX
>
> <snip snip>
>
>
> When I run /usr/local/rancid/bin/rancid-run to test the automated
> method, I see this show up in the log output:
>
>
>
> starting: Mon Jun 16 17:09:03 PDT 2008
>
>
>
> Trying to get all of the configs.
> 10.10.10.7 : missed cmd(s): write term all
> =====================================
> Getting missed routers: round 1.
> 10.10.10.7 : missed cmd(s): write term all
> =====================================
> Getting missed routers: round 2.
> 10.10.10.7 : missed cmd(s): write term all
> =====================================
> Getting missed routers: round 3.
> 10.10.10.7 : missed cmd(s): write term all
> =====================================
> Getting missed routers: round 4.
> 10.10.10.7 : missed cmd(s): write term all
>
> cvs diff: Diffing .
> cvs diff: Diffing configs
> cvs commit: Examining .
> cvs commit: Examining configs
> done
>
> ending: Mon Jun 16 17:14:02 PDT 2008
>
>
>
>
> Any help would be greatly appreciated!
>
>
> --
> ============================================|
> Victor Breen
> victor at impulse.net
> |==========================================*|
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20080618/6f93e2c1/attachment.html 