[rancid] Re: GSR 12k - sho diag / missing subslot spa info

[Yuval Ben Ari]

I am also having the same problem, and I am also interested to have the S/N
of the SPA
Indeed "show inventory" seems the best way to do it.
has anyone added "show inventory" parser yet?
otherwise I can try to add it and post here.

Yuval

On Wed, Jun 27, 2007 at 10:50 PM, Elliott, Andrew <AElliott at xo.com> wrote:

>
> > > Hello,
> > >
> > > I have been recently asked that my router backups include
> > the SUBSLOT
> > > line from 'sho diag' on the 12k's.
> > >
> > > Here is an example (trimmed for brevity) of the output I
> > want rancid to
> > > parse:
> > >
> > > SLOT 1  (RP/LC 1 ): Modular SPA Interface Card (10G)
> > > -snip-
> > >
> > >   SPA Information:
> > >         subslot 1/0: SPA-10X1GE-V2 (0x508), status is ok
> > >         subslot 1/1: Empty
> > >         subslot 1/2: Empty
> > >         subslot 1/3: Empty
> > >
> > > SUBSLOT  1/0 (SPA-10X1GE-V2): 10-port Gigabit Ethernet Shared Port
> > > Adapter
> > >         Product Identifier (PID) : SPA-10X1GE-V2
> > > -snip-
> > >
> > > This is a new card type that we have recently begun deploying, and
> > > currently all that is backed up is the main SPA IC
> > information, not the
> > > info on the "SUBSLOT" or "SPA -> subslot" lines.
> >
> > I'd need to have the complete output; I don't have GSRs anymore.
> >
> CHR1.NYC-NY#sho diag 1
>
> SLOT 1  (RP/LC 1 ): Modular SPA Interface Card (10G)
>  MAIN: type 149,  00-0000-00 rev A0
>        Deviation:  D090170
>        HW config: 0x20    SW key: 00-00-00
>  PCA:  00-00000-00 rev A0 ver 4
>        Design Release 1.0  S/N SAD000000M0
>  MBUS: Embedded Agent
>        Test hist: 0x00    RMA#: 00-00-00    RMA hist: 0x00
>  DIAG: Test count: 0x00000000    Test results: 0x00000000
>  FRU:  Linecard/Module: 12000-SIP-601=
>        Processor Memory: MEM-LC5-2048=(Non-Replaceable)
>        Packet Memory: MEM-LC5-PKT-256=(Non-Replaceable)
>  L3 Engine: 5 - ISE 10 Gbps
>  MBUS Agent Software version 2.51 (RAM) (ROM version is 3.50)
>  ROM Monitor version 17.1
>  Fabric Downloader version used 4.1 (ROM version is 4.1)
>  Primary clock is CSC 1
>  Board is analyzed
>  Board State is Line Card Enabled (IOS  RUN )
>  Insertion time: 00:22:52 (2w4d ago)
>  Processor Memory size: 2147483648 bytes
>  TX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 32768
> bytes
>  RX Packet Memory size: 268435456 bytes, Packet Memory pagesize: 32768
> bytes
>  0 crashes since restart
>
>  SPA Information:
>        subslot 1/0: SPA-10X1GE-V2 (0x508), status is ok
>        subslot 1/1: Empty
>        subslot 1/2: Empty
>        subslot 1/3: Empty
> CHR1.NYC-NY#
>
> >
> > > It is possible I am using a version of rancid that needs to
> > be upgraded
> > > and/or patched.
> >
> > possibly.  'show inventory' has been added and that ought to
> > include this
> > information...if cisco has gotten around to adding it to this platform
> > yet.
> >
>
> Looks like this might be the best way to go.  From the show inventory:
>
> NAME: "slot 1", DESCR: "ISE 10G Modular Services Card v2"
> PID: 12000-SIP-601     , VID: V02, SN: SAD111403M0
>
> NAME: "SPA subslot 1/0", DESCR: "10-port Gigabit Ethernet Shared Port
> Adapter"
> PID: SPA-10X1GE-V2     , VID: V01, SN: JAB111701NG
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20080302/c7260a39/attachment.html