[rancid] Re: problem with procurve 2900-24g and new firmware version (T13.23

[Jeroen]

john heasley wrote:
> Fri, Nov 21, 2008 at 08:55:10PM +0100, Jeroen:
>   
>> Jeroen wrote:
>>     
>>> john heasley wrote:
>>>   
>>>       
>>>> probably because some commands have changed.  try the attached.
>>>>
>>>>   
>>>>     
>>>>         
>>> Hi John,
>>>
>>> Thank you for your prompt answer but unfortunately this doesn't help.
>>> Still the same problem.
>>>
>>>
>>> Kind regards,
>>>
>>> Jeroen
>>>
>>>
>>>   
>>>       
>> Hi all,
>>
>> me again; problem fixed !
>> after I got the message from John I found out that:
>>
>> show system-information
>>     
>
> what i sent to you had a fix for this.  why didnt it work?
>
>   
Hi John,

I'm sorry, I really don't know; only that it didn't. Might be in the way 
it tries to find out to either use 'system-information' or 'system 
information' ?

Kind regards,

Jeroen

>> had to be changed to:
>>
>> show system information
>>
>> here is the patch:
>>
>>
>> @@ -461,7 +461,7 @@
>>  @commandtable = (
>>      {'show version'            => 'ShowVersion'},
>>      {'show flash'            => 'ShowFlash'},
>> -    {'show system-information'    => 'ShowSystem'},
>> +    {'show system information'    => 'ShowSystem'},
>>      {'show module'            => 'ShowModule'},
>>      {'show stack'            => 'ShowStack'},
>>      {'write term'            => 'WriteTerm'}
>>
>>
>>
>>
>> Have a nice weekend !
>>
>> Kind regards,
>>
>> Jeroen
>>     
>>>   
>>>       
>>>> Fri, Nov 21, 2008 at 12:40:25PM +0100, Jeroen:
>>>>   
>>>>     
>>>>         
>>>>> Hi Group,
>>>>>
>>>>> I'm a long time user of rancid but never had problems I couldn't solve 
>>>>> myself with a bit of googling, I'm currently using rancid-2.3.2a8.
>>>>>
>>>>> Problems started when I upgraded one of the many HP procurves we have 
>>>>> from T12.13 to firmware version T13.23.
>>>>>
>>>>> Rancid started complaining about not being able to fetch the config.
>>>>>
>>>>> I've tried debugging this by logging in from the console:
>>>>>
>>>>> bin/hlogin -f /home/rancid/.cloginrc <switchname>
>>>>>
>>>>> however, this is working fine as far as I can tell; it's logging in, 
>>>>> gives me a prompt and I'm able to give commands and everything.
>>>>>
>>>>> Is someone able to point me to the right direction, or may be even has a 
>>>>> patch already to make this work?
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> Jeroen
>>>>> _______________________________________________
>>>>> Rancid-discuss mailing list
>>>>> Rancid-discuss at shrubbery.net
>>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>>>     
>>>>>       
>>>>>           
>>> _______________________________________________
>>> Rancid-discuss mailing list
>>> Rancid-discuss at shrubbery.net
>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>   
>>>       
>> _______________________________________________
>> Rancid-discuss mailing list
>> Rancid-discuss at shrubbery.net
>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>