[rancid] Re: following problem

[Chris Gauthier]

I was not referring to file permissions.  I was referring to the
permissions given to your account (toto) on the network device by your
network administrator.  This does not sound like a problem with rancid
at all, in my opinion.

Chris

-----Original Message-----
From: hina [mailto:hina at hina.fr] 
Sent: Friday, September 19, 2008 7:25 AM
To: Chris Gauthier
Subject: Re: [rancid] following problem

On Thu, Sep 18, 2008 at 09:32:28AM -0700, Chris Gauthier wrote:
Hi Chris
Do you know which binaries are used by rancid-run , to check the
permissions ?
Many thanks
hina


> This sounds more like a permissions issue since clogin isn't running
the
> commands rancid does.  Try just logging in without using clogin and
see
> if the same show commands work the same way.  If they do, it's not a
> rancid problem at all (as I suspect).
> 
> Chris
> 
> -----Original Message-----
> From: rancid-discuss-bounces at shrubbery.net
> [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of hina
> Sent: Thursday, September 18, 2008 5:31 AM
> To: rancid-discuss at shrubbery.net
> Subject: [rancid] following problem
> 
> 
> Hi guys, the configuration you gave to me, is working perfectly..
> I can login with a user
> and without enable it, try to start the backup ..
> BUt ....  (of course, there is a "but" ) My network administrator gave
> us a user (toto) who has the right (level 1/15) to do "show run" and
> "show start".
> so I try, by clogin to test it .. 
> look by yourself :
> 
> $ clogin 10.0.10.XX
> scape character is '^]'.
> 
> 
> User Access Verification
> 
> Username: toto
> Password: 
> Sw_CCR_1>show start
>  Using 3319 out of 32768 bytes
> !
> .....
> .....
> line con 0
>  exec-timeout 0 0
> line vty 0 4
>  password XXXXXXXX
>  login XOXO
> line vty 5 15
>  password XXXXXXXX
>  login XIXI
> !
> end
> 
> Sw_CCR_1>show run
> Building configuration...
> 
> Current configuration : 13 bytes
> !
> !
> !
> !
> end
> 
> Sw_CCR_1>
> The show run doesnt show any thing.. The show start is working.
> What is missing ?  Which else binary are use during the show run. Can
> you help me again ? 
> Many thx
> hina
>