[rancid] Re: Problems with Dell Extension

[Temporary Mailbox]

Good question.

It pages through it w/out error or problem.

Any other ideas?


On Wed, Jun 3, 2009 at 3:14 PM, Jeremy Singletary <jeremys at rickyninja.net>wrote:

> What happens if you run dlogin from the command line with a switch
> command that will produce more than a page of output?  Try dlogin with
> the show running-config command (assuming there's more than one page of
> ocnfig), and let me know if it hangs.
>
> -jeremy
>
> On 06/03/09, Temporary Mailbox <2009 at tybox.net> said:
> >
> >    I'm   attempting   to   set   up   the   dell   extension   found   at
> >    [1]http://www.rickyninja.net/rancid/
> >    Everything seems to work fine when logging in with dlogin:
> >    $ sudo -u www /opt/local/libexec/rancid/dlogin -autoenable -u Engineer
> >    -p <snip> -c "show version" 10.13.8.1
> >    10.13.8.1
> >    spawn telnet 10.13.8.1
> >    Trying 10.13.8.1...
> >    Connected to 10.13.8.1.
> >    Escape character is '^]'.
> >    04-Jun-2009  02:12:41  %MSCM-I-NEWTERM:  New  TELNET  connection  from
> >    10.75.224.12
> >    User Name:Engineer
> >    Password:**********
> >    TW-G-6024-1#
> >    TW-G-6024-1#  show version
> >    SW version    1.0.2.07 ( date  21-Nov-2003 time  09:58:38 )
> >    Boot version    1.0.0.13 ( date  13-Aug-2003 time  15:28:31 )
> >    HW version    00.01.64
> >    TW-G-6024-1#eConnection closed by foreign host.
> >    However, when I set up cloginrc:
> >    #CTX
> >    add autoenable 10.13.* 1
> >    add method 10.13.* telnet
> >    add password 10.13.* Engineer <snip>
> >    and router.db:
> >    10.13.8.1:dell:up
> >    It doesn't seem to work when running rancid manually:
> >    $ sudo -u www /opt/local/bin/rancid-run GROUP -r 10.13.8.1
> >    Trying to get all of the configs.
> >    opened     network     stream     from     10.13.8.1    if    ()    at
> >    /opt/local/libexec/rancid/drancid line 266.
> >    found_end = 0, clean_run = 0
> >    10.13.8.1 dlogin error: Error: Connection closed (telnet): 10.13.8.1
> >    [2]10.13.8.1:  missed  cmd(s):  show  version,show
> running-config,show
> >    vlan
> >    [3]10.13.8.1: End of run not found
> >    !
> >    The error in the log isn't really revealing.
> >    I installed rancid from macports, this is in the header of rancid-run:
> >    ## $Id: [4]rancid-run.in,v 1.30 2004/03/12 23:17:28 heas Exp $
> >    I  really  appreciate  any support/ideas/help anyone can offer to help
> >    figure this out.
> >    -Josh
> >
> > References
> >
> >    1. http://www.rickyninja.net/rancid/
> >    2. http://10.13.8.1/
> >    3. http://10.13.8.1/
> >    4. http://rancid-run.in/
>
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20090603/21ac2c36/attachment.html