[rancid] Re: Cisco 3845 with a Cisco Unity Express unexplained hardware diffs

[Jose Leitao]

Hello,

We have run several tests on the Unity Module, it seems to work fine.

Thanks,
JL

On Wed, Oct 7, 2009 at 4:28 PM, john heasley <heas at shrubbery.net> wrote:
> Wed, Oct 07, 2009 at 10:12:32AM +0200, Jose Leitao:
>> Hello,
>>
>> I have a Cisco 3845 with a Cisco Unity Express module for which rancid
>> shows these diffs constantly:
>>
>> retrieving revision 1.50
>> diff -U 4 -r1.50 192.168.0.1
>> @@ -301,11 +301,9 @@
>>  !Slot 1: type Integrated Service Engine, 1 ports
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: part 800-29801-01, serial FOC11111111
>> - !Slot 1: hvers 0.0 rev UNKNOWN
>>  !Slot 1: part 800-29814-01, serial FOC22222222
>> - !Slot 1: part 00-0000-00, serial 0
>>
>> retrieving revision 1.51
>> diff -U 4 -r1.51 192.168.0.1
>> @@ -301,9 +301,11 @@
>> - Hide quoted text -
>>  !Slot 1: type Integrated Service Engine, 1 ports
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: part 800-29801-01, serial FOC11111111
>> + !Slot 1: hvers 0.0 rev UNKNOWN
>>  !Slot 1: part 800-29814-01, serial FOC22222222
>> + !Slot 1: part 00-0000-00, serial 0
>>
>> retrieving revision 1.52
>> diff -U 4 -r1.52 192.168.0.1
>> @@ -301,11 +301,9 @@
>> - Hide quoted text -
>>  !Slot 1: type Integrated Service Engine, 1 ports
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: part 800-29801-01, serial FOC11111111
>> - !Slot 1: hvers 0.0 rev UNKNOWN
>>  !Slot 1: part 800-29814-01, serial FOC22222222
>> - !Slot 1: part 00-0000-00, serial 0
>>
>> retrieving revision 1.53
>> diff -U 4 -r1.53 192.168.0.1
>> @@ -301,9 +301,11 @@
>> - Hide quoted text -
>>  !Slot 1: type Integrated Service Engine, 1 ports
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: hvers 1.0 rev A0
>>  !Slot 1: part 800-29801-01, serial FOC11111111
>> + !Slot 1: hvers 0.0 rev UNKNOWN
>>  !Slot 1: part 800-29814-01, serial FOC22222222
>> + !Slot 1: part 00-0000-00, serial 0
>>
>> In the Slot1 is a NME-CUE, what could this mean?:
>>
>> !Slot 1: hvers 0.0 rev UNKNOWN
>> !Slot 1: part 00-0000-00, serial 0
>>
>> I have another Cisco 3845 with a NME-CUE on the same slot without
>> incident. Both routers have the same IOS version
>> (adventerprisek9-mz.124-24.T1) and I recently opened a TAC case, but
>> since the above output seems to come from show inventory and show
>> diag, there wasn?t much they could do. In fact, running sh diag and
>> show inv from the CLI has never shown me the "Slot 1: hvers 0.0 rev
>> UNKNOWN" message.
>>
>> Any ideas?
>
> the module/card is broken?  this info comes from show diag, not inventory.
> the output does look odd, 3 hvers entries for slot 1.  there must be some
> daughter entries in the show diag output for the ISE card that rancid is
> missing; its hard to get that data because the output formatting is
> inconsistent even among platforms with the same IOS rev.  However,
> inconsistent o/p is an artifact of what the device is returning, not
> rancid.
>
>