[rancid] rancid-run and Catalyst switches running IOS 11.2

[Chandler, Mel]

I'm having a similar issue, was about to troubleshoot it myself.  I was
resigning myself that I'd have to upgrade that switch to 12.x code.


-----Original Message-----
From: rancid-discuss-bounces at shrubbery.net
[mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Chris Knight
Sent: Sunday, August 22, 2010 10:10 PM
To: rancid-discuss
Subject: [rancid] rancid-run and Catalyst switches running IOS 11.2

Howdy,

  I was setting up Rancid to auto-backup the configs on some network
gear, and found that rancid-run completely failed to pull the configs
from two switches.  After some poking, verifying that clogin worked,
etc, I determined that the only difference between these switches and
the rest of the gear is that they are running IOS 11.2 while the rest
of the hardware is 12.x.

  Is there a device type, or other configuration switch, that I can
use to pull the configs off of IOS 11.x devices?

Thanks,

-Chris
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss at shrubbery.net
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
****************************************************************************************** 
This message may contain confidential or proprietary information intended only for the use of the 
addressee(s) named above or may contain information that is legally privileged. If you are 
not the intended addressee, or the person responsible for delivering it to the intended addressee, 
you are hereby notified that reading, disseminating, distributing or copying this message is strictly 
prohibited. If you have received this message by mistake, please immediately notify us by 
replying to the message and delete the original message and any copies immediately thereafter. 

Thank you. 
****************************************************************************************** 
FACLD -