[rancid] Rancid WLC - no command after login

[king1982 at centrum.cz]

Hi Alex,

this is exactly my problem:

(Cisco Controller)
User: rancid
Password:******
(Cisco Controller) >
Error: TIMEOUT reached
rancid at ejpsrvnetmng01:~$

How can I fix this problem with expecting autoenable mode?

Martin
______________________________________________________________
> Od: "Alex DEKKER" <rancid at ale.cx>
> Komu: rancid-discuss at shrubbery.net
> Datum: 13.12.2010 21:24
> Předmět: Re: [rancid] Rancid WLC - no command after login
>
>On Monday 13 December 2010 09:36:48 king1982 at centrum.cz wrote:
>
>> At this time  WLC´s command line don´t work correctly, device don´t accept
>> any usual command (show, clear, ...). Same for SSH method.
>> 
>> If I try to list configuration, this happens:
>> 
>> (Cisco Controller) > show run-config
>> 
>> Error: TIMEOUT reached
>
>This looks like a classic autoenable problem - it's waiting to see the 
>privileged prompt and doesn't, so times out. You will probably find that you 
>get a TIMEOUT even if you don't type anything.
>
>alexd
>_______________________________________________
>Rancid-discuss mailing list
>Rancid-discuss at shrubbery.net
>http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss