[rancid] H3C S3600 Figure out prompt
Jethro R Binks
jethro.binks at strath.ac.uk
Thu Oct 7 17:42:19 UTC 2010
On Thu, 7 Oct 2010, john heasley wrote:
> Thu, Oct 07, 2010 at 04:30:05PM +0200, Jeremy Guasco:
> > Hi,
> >
> > I would like to use Rancid with a H3C S3600 but I have an "Figure out
> > prompt" error.
> >
> > Did someone resolve my problem ?
> >
> > Log :
> > Getting missed routers: round 4.
> > can not find channel named "exp6"
>
> this would inidicate that the device of the client (ssh/telnet) closed
> prematurely. though that with a timeout is odd; perhaps the script is
> closing the channel twice.
>
> if its really hanging on the prompt, try *login -d host
Nothing specific to add, other than please try the attached version of
h3clogin. I fixed various issues with it in recent months, maybe it fixes
this too.
Jethro.
>
> > while executing
> > "close"
> > ("foreach" body line 129)
> > invoked from within
> > "foreach router [lrange $argv $i end] {
> > set router [string tolower $router]
> > send_user "$router\n"
> >
> > # Figure out prompt.
> > # Since autoena..."
> > (file "/usr/lib/rancid/bin/h3clogin" line 657)
> > 192.168.0.193 h3clogin error: Error: TIMEOUT reached
> > 192.168.0.193: missed cmd(s): display domain,display ftm
> > topology-database,display current-configuration,display password-control
> > super,display cluster,dir /all unit2>flash:/,display device
> > manuinfo,display xrn-fabric,display password-control,display fan,dir
> > /all unit5>flash:/,display poe temperature-protection,display mirror
> > all,display lacp sys,display fib,dir /all unit3>flash:/,display poe
> > powersupply,display device,dir /all unit1>flash:/,display
> > version,display link-aggregation verbose,display ssh server status,dir
> > /all unit6>flash:/,display vlan all,display link-aggregation summary,dir
> > /all unit7>flash:/,dir /all unit4>flash:/,display ip route,display
> > power,display local-user,display boot-loader,dir /all unit8>flash:/
> > 192.168.0.193: End of run not found
> >
> > Jeremy
> >
> > _______________________________________________
> > Rancid-discuss mailing list
> > Rancid-discuss at shrubbery.net
> > http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss at shrubbery.net
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
. . . . . . . . . . . . . . . . . . . . . . . . .
Jethro R Binks, Network Manager,
Information Services Directorate, University Of Strathclyde, Glasgow, UK
The University of Strathclyde is a charitable body, registered in
Scotland, number SC015263.
-------------- next part --------------
#! /usr/local/bin/expect --
##
## $Id: h3clogin.in,v 1.79 2004/05/27 21:57:52 heas Exp $
##
## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
## All rights reserved.
##
## This software may be freely copied, modified and redistributed
## without fee for non-commerical purposes provided that this license
## remains intact and unmodified with any RANCID distribution.
##
## There is no warranty or other guarantee of fitness of this software.
## It is provided solely "as is". The author(s) disclaim(s) all
## responsibility and liability with respect to this software's usage
## or its effect upon hardware, computer systems, other software, or
## anything else.
##
## Except where noted otherwise, rancid was written by and is maintained by
## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
##
#
# The login expect scripts were based on Erik Sherk's gwtn, by permission.
#
# h3clogin - H3C (Huawei-3Com) login
#
# Most options are intuitive for logging into a Cisco router.
# The default is to enable (thus -noenable). Some folks have
# setup tacacs to have a user login at priv-lvl = 15 (enabled)
# so the -autoenable flag was added for this case (don't go through
# the process of enabling and the prompt will be the "#" prompt.
# The default username password is the same as the vty password.
#
# Set to 1 to enable some debugging:
exp_internal 0
# Usage line
set usage "Usage: $argv0 \[-autoenable\] \[-noenable\] \[-c command\] \
\[-Evar=x\] \[-e enable-password\] \[-f cloginrc-file\] \[-p user-password\] \
\[-s script-file\] \[-t timeout\] \[-u username\] \
\[-v vty-password\] \[-w enable-username\] \[-x command-file\] \
\[-y ssh_cypher_type\] router \[router...\]\n"
# env(CLOGIN) may contain:
# x == do not set xterm banner or name
# Password file
set password_file $env(HOME)/.cloginrc
# Default is to login to the router
set do_command 0
set do_script 0
# The default is to automatically enable
set avenable 1
# The default is that you login non-enabled (tacacs can have you login already
# enabled)
set avautoenable 0
# The default is to look in the password file to find the passwords. This
# tracks if we receive them on the command line.
set do_passwd 1
set do_enapasswd 1
# attempt at platform switching.
set platform ""
# Find the user in the ENV, or use the unix userid.
if {[ info exists env(CISCO_USER) ] } {
set default_user $env(CISCO_USER)
} elseif {[ info exists env(USER) ]} {
set default_user $env(USER)
} elseif {[ info exists env(LOGNAME) ]} {
set default_user $env(LOGNAME)
} else {
# This uses "id" which I think is portable. At least it has existed
# (without options) on all machines/OSes I've been on recently -
# unlike whoami or id -nu.
if [ catch {exec id} reason ] {
send_error "\nError: could not exec id: $reason\n"
exit 1
}
regexp {\(([^)]*)} "$reason" junk default_user
}
# Sometimes routers take awhile to answer (the default is 10 sec)
set timeout 45
# Process the command line
for {set i 0} {$i < $argc} {incr i} {
set arg [lindex $argv $i]
switch -glob -- $arg {
# Username
-u* -
-U* {
if {! [ regexp .\[uU\](.+) $arg ignore user]} {
incr i
set username [ lindex $argv $i ]
}
# VTY Password
} -p* -
-P* {
if {! [ regexp .\[pP\](.+) $arg ignore userpasswd]} {
incr i
set userpasswd [ lindex $argv $i ]
}
set do_passwd 0
# VTY Password
} -v* -
-v* {
if {! [ regexp .\[vV\](.+) $arg ignore passwd]} {
incr i
set passwd [ lindex $argv $i ]
}
set do_passwd 0
# Enable Username
} -w* -
-W* {
if {! [ regexp .\[wW\](.+) $arg ignore enauser]} {
incr i
set enausername [ lindex $argv $i ]
}
# Environment variable to pass to -s scripts
} -E*
{
if {[ regexp .\[E\](.+)=(.+) $arg ignore varname varvalue]} {
set E$varname $varvalue
} else {
send_user "\nError: invalid format for -E in $arg\n"
exit 1
}
# Enable Password
} -e*
{
if {! [ regexp .\[e\](.+) $arg ignore enapasswd]} {
incr i
set enapasswd [ lindex $argv $i ]
}
set do_enapasswd 0
# Command to run.
} -c* -
-C* {
if {! [ regexp .\[cC\](.+) $arg ignore command]} {
incr i
set command [ lindex $argv $i ]
}
set do_command 1
# Expect script to run.
} -s* -
-S* {
if {! [ regexp .\[sS\](.+) $arg ignore sfile]} {
incr i
set sfile [ lindex $argv $i ]
}
if { ! [ file readable $sfile ] } {
send_user "\nError: Can't read $sfile\n"
exit 1
}
set do_script 1
# 'ssh -c' cypher type
} -y* -
-Y* {
if {! [ regexp .\[eE\](.+) $arg ignore cypher]} {
incr i
set cypher [ lindex $argv $i ]
}
# alternate cloginrc file
} -f* -
-F* {
if {! [ regexp .\[fF\](.+) $arg ignore password_file]} {
incr i
set password_file [ lindex $argv $i ]
}
# Timeout
} -t* -
-T* {
if {! [ regexp .\[tT\](.+) $arg ignore timeout]} {
incr i
set timeout [ lindex $argv $i ]
}
# Command file
} -x* -
-X {
if {! [ regexp .\[xX\](.+) $arg ignore cmd_file]} {
incr i
set cmd_file [ lindex $argv $i ]
}
if [ catch {set cmd_fd [open $cmd_file r]} reason ] {
send_user "\nError: $reason\n"
exit 1
}
set cmd_text [read $cmd_fd]
close $cmd_fd
set command [join [split $cmd_text \n] \;]
set do_command 1
# Do we enable?
} -noenable {
set avenable 0
# Does tacacs automatically enable us?
} -autoenable {
set avautoenable 1
set avenable 0
} -* {
send_user "\nError: Unknown argument! $arg\n"
send_user $usage
exit 1
} default {
break
}
}
}
# Process routers...no routers listed is an error.
if { $i == $argc } {
send_user "\nError: $usage"
}
# Only be quiet if we are running a script (it can log its output
# on its own)
if { $do_script } {
log_user 0
} else {
log_user 1
}
#
# Done configuration/variable setting. Now run with it...
#
# Sets Xterm title if interactive...if its an xterm and the user cares
proc label { host } {
global env
# if CLOGIN has an 'x' in it, don't set the xterm name/banner
if [info exists env(CLOGIN)] {
if {[string first "x" $env(CLOGIN)] != -1} { return }
}
# take host from ENV(TERM)
if [info exists env(TERM)] {
if [regexp \^(xterm|vs) $env(TERM) ignore ] {
send_user "\033]1;[lindex [split $host "."] 0]\a"
send_user "\033]2;$host\a"
}
}
}
# This is a helper function to make the password file easier to
# maintain. Using this the password file has the form:
# add password sl* pete cow
# add password at* steve
# add password * hanky-pie
proc add {var args} { global int_$var ; lappend int_$var $args}
proc include {args} {
global env
regsub -all "(^{|}$)" $args {} args
if { [ regexp "^/" $args ignore ] == 0 } {
set args $env(HOME)/$args
}
source_password_file $args
}
proc find {var router} {
upvar int_$var list
if { [info exists list] } {
foreach line $list {
if { [string match [lindex $line 0] $router ] } {
return [lrange $line 1 end]
}
}
}
return {}
}
# Loads the password file. Note that as this file is tcl, and that
# it is sourced, the user better know what to put in there, as it
# could install more than just password info... I will assume however,
# that a "bad guy" could just as easy put such code in the clogin
# script, so I will leave .cloginrc as just an extention of that script
proc source_password_file { password_file } {
global env
if { ! [file exists $password_file] } {
send_user "\nError: password file ($password_file) does not exist\n"
exit 1
}
file stat $password_file fileinfo
if { [expr ($fileinfo(mode) & 007)] != 0000 } {
send_user "\nError: $password_file must not be world readable/writable\n"
exit 1
}
if [ catch {source $password_file} reason ] {
send_user "\nError: $reason\n"
exit 1
}
}
# Log into the router.
proc login { router user userpswd passwd enapasswd cmethod cyphertype } {
global spawn_id in_proc do_command do_script platform
global prompt u_prompt p_prompt e_prompt sshcmd
set in_proc 1
set uprompt_seen 0
# try each of the connection methods in $cmethod until one is successful
set progs [llength $cmethod]
foreach prog [lrange $cmethod 0 end] {
if [string match "telnet*" $prog] {
regexp {telnet(:([^[:space:]]+))*} $prog command suffix port
if {"$port" == ""} {
set retval [ catch {spawn telnet $router} reason ]
} else {
set retval [ catch {spawn telnet $router $port} reason ]
}
if { $retval } {
send_user "\nError: telnet failed: $reason\n"
exit 1
}
} elseif [string match "ssh*" $prog] {
regexp {ssh(:([^[:space:]]+))*} $prog command suffix port
if {"$port" == ""} {
set retval [ catch {spawn $sshcmd -c $cyphertype -x -l $user $router} reason ]
} else {
set retval [ catch {spawn $sshcmd -c $cyphertype -x -l $user -p $port $router} reason ]
}
if { $retval } {
send_user "\nError: $sshcmd failed: $reason\n"
exit 1
}
} elseif ![string compare $prog "rsh"] {
if [ catch {spawn rsh -l $user $router} reason ] {
send_user "\nError: rsh failed: $reason\n"
exit 1
}
} else {
puts "\nError: unknown connection method: $prog"
return 1
}
incr progs -1
sleep 0.3
# This helps cleanup each expect clause.
expect_after {
timeout {
send_user "\nError: TIMEOUT reached\n"
catch {close}; wait
if { $in_proc} {
return 1
} else {
continue
}
} eof {
send_user "\nError: EOF received\n"
catch {close}; wait
if { $in_proc} {
return 1
} else {
continue
}
}
}
# Here we get a little tricky. There are several possibilities:
# the router can ask for a username and passwd and then
# talk to the TACACS server to authenticate you, or if the
# TACACS server is not working, then it will use the enable
# passwd. Or, the router might not have TACACS turned on,
# then it will just send the passwd.
# if telnet fails with connection refused, try ssh
expect {
-re "(Connection refused|Secure connection \[^\n\r]+ refused)" {
catch {close}; wait
if !$progs {
send_user "\nError: Connection Refused ($prog): $router\n"
return 1
}
}
-re "(Connection closed by|Connection to \[^\n\r]+ closed)" {
catch {close}; wait
if !$progs {
send_user "\nError: Connection closed ($prog): $router\n"
return 1
}
}
eof { send_user "\nError: Couldn't login: $router\n"; wait; return 1 }
-nocase "unknown host\r" {
catch {close};
send_user "\nError: Unknown host $router\n"; wait; return 1
}
"Host is unreachable" {
catch {close};
send_user "\nError: Host Unreachable: $router\n"; wait; return 1
}
"No address associated with name" {
catch {close};
send_user "\nError: Unknown host $router\n"; wait; return 1
}
-re "(Host key not found |The authenticity of host .* be established).*\(yes\/no\)\?" {
send "yes\r"
send_user "\nHost $router added to the list of known hosts.\n"
exp_continue }
-re "HOST IDENTIFICATION HAS CHANGED.* \(yes\/no\)\?" {
send "no\r"
send_user "\nError: The host key for $router has changed. Update the SSH known_hosts file accordingly.\n"
return 1 }
-re "Offending key for .* \(yes\/no\)\?" {
send "no\r"
send_user "\nError: host key mismatch for $router. Update the SSH known_hosts file accordingly.\n"
return 1 }
-re "(denied|Sorry)" {
send_user "\nError: Check your passwd for $router\n"
catch {close}; wait; return 1
}
"Login failed" {
send_user "\nError: Check your passwd for $router\n"
return 1
}
-re "% (Bad passwords|Authentication failed)" {
send_user "\nError: Check your passwd for $router\n"
return 1
}
"Press any key to continue." {
# send_user "Pressing the ANY key\n"
send "\r"
exp_continue
}
-re "Enter Selection: " {
# Catalyst 1900s have some lame menu. Enter
# K to reach a command-line.
send "K\r"
exp_continue;
}
-re "@\[^\r\n]+ $p_prompt" {
# ssh pwd prompt
sleep 1
send "$userpswd\r"
exp_continue
}
-re "$u_prompt" {
send "$user\r"
set uprompt_seen 1
exp_continue
}
-re "$p_prompt" {
sleep 1
if {$uprompt_seen == 1} {
send "$userpswd\r"
} else {
send "$passwd\r"
}
exp_continue
}
-re "$prompt" { break; }
"Login invalid" {
send_user "\nError: Invalid login: $router\n";
catch {close}; wait; return 1
}
}
}
set in_proc 0
return 0
}
# Enable
proc do_enable { enauser enapasswd } {
global prompt in_proc
global u_prompt e_prompt
set in_proc 1
set enacmd "system-view"
send "$enacmd\r"
expect {
-re "$u_prompt" { send "$enauser\r"; exp_continue}
-re "$e_prompt" { send "$enapasswd\r"; exp_continue}
-re "(denied|Sorry|Incorrect)" {
# % Access denied - from local auth and poss. others
send_user "\nError: Check your Enable passwd\n";
return 1
}
"% Error in authentication" {
send_user "\nError: Check your Enable passwd\n"
return 1
}
"% Bad passwords" {
send_user "\nError: Check your Enable passwd\n"
return 1
}
}
# We set the prompt variable (above) so script files don't need
# to know what it is.
set in_proc 0
return 0
}
# Run commands given on the command line.
proc run_commands { prompt command } {
global in_proc platform
set in_proc 1
# escape any parens in the prompt, such as "(enable)"
regsub -all {[][)(]} $prompt {\\&} reprompt
expect {
-re $reprompt {}
-re "\[\n\r]+" { exp_continue }
}
# this is the only way i see to get rid of more prompts in o/p..grrrrr
log_user 0
# Is this a multi-command?
if [ string match "*\;*" "$command" ] {
set commands [split $command \;]
set num_commands [llength $commands]
# The pager can not be turned off on some 3Com/H3C, so we have to look
# for the "More" prompt.
for {set i 0} {$i < $num_commands} { incr i} {
send "[subst -nocommands [lindex $commands $i]]\r"
expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user -- "$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprompt." { send_user -- "$expect_out(buffer)"
exp_continue }
-re "\[\n\r]+" { send_user -- "$expect_out(buffer)"
exp_continue }
-re "^ ---- More ----.*\[^\n\r]*" {
sleep 0.1
send " "
exp_continue }
}
}
} else {
# The pager can not be turned off on some 3Com/H3C, so we have to look
# for the "More" prompt.
send "[subst -nocommands $command]\r"
expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user -- "$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprompt." { send_user -- "$expect_out(buffer)"
exp_continue }
-re "\[\n\r]+" { send_user -- "$expect_out(buffer)"
exp_continue }
-re "^ ---- More ----.*\[^\n\r]*" {
sleep 0.1
send " "
exp_continue }
}
}
log_user 1
send "quit\r"
expect {
-re "^\[^\n\r *]*$reprompt" {
# H3C products
# return to non-enabled mode
# on exit in enabled mode.
send "quit\r"
exp_continue;
}
# TODO: we will need to do this too:
# "Do you wish to save your configuration changes" {
# send "n\r"
# exp_continue
# }
-re "\[\n\r]+" { exp_continue }
# hwlogin+mod:
-re "\[^\n\r *]Note:" { return 0 }
timeout { return 0 }
eof { return 0 }
}
set in_proc 0
}
#
# For each router... (this is main loop)
#
source_password_file $password_file
set in_proc 0
foreach router [lrange $argv $i end] {
set router [string tolower $router]
send_user "$router\n"
# Figure out prompt.
# Since autoenable is off by default, if we have it defined, it
# was done on the command line. If it is not specifically set on the
# command line, check the password file.
if $avautoenable {
set autoenable 1
set enable 0
# hwlogin:
#set prompt "(#| \\(enable\\))"
set prompt ">"
} else {
set ae [find autoenable $router]
if { "$ae" == "1" } {
set autoenable 1
set enable 0
# hwlogin:
set prompt ">"
} else {
set autoenable 0
set enable $avenable
set prompt ">"
}
}
# look for noenable option in .cloginrc
# Strath: but I do not know why I made this change, and it does not appear
# to be reflected in other *rancid in svn trunk.
# if [find noenable $router] != ""
if { [find noenable $router] == "1" } {
send_user "\nset enable 0.\n"
set enable 0
}
# Figure out passwords
if { $do_passwd || $do_enapasswd } {
set pswd [find password $router]
if { [llength $pswd] == 0 } {
send_user "\nError: no password for $router in $password_file.\n"
continue
}
if { $enable && $do_enapasswd && $autoenable == 0 && [llength $pswd] < 2 } {
send_user "\nError: no enable password for $router in $password_file.\n"
continue
}
set passwd [join [lindex $pswd 0] ""]
set enapasswd [join [lindex $pswd 1] ""]
}
# Figure out username
if {[info exists username]} {
# command line username
set ruser $username
} else {
set ruser [join [find user $router] ""]
if { "$ruser" == "" } { set ruser $default_user }
}
# Figure out username's password (if different from the vty password)
if {[info exists userpasswd]} {
# command line username
set userpswd $userpasswd
} else {
set userpswd [join [find userpassword $router] ""]
if { "$userpswd" == "" } { set userpswd $passwd }
}
# Figure out enable username
if {[info exists enausername]} {
# command line enausername
set enauser $enausername
} else {
set enauser [join [find enauser $router] ""]
if { "$enauser" == "" } { set enauser $ruser }
}
# Figure out prompts
set u_prompt [find userprompt $router]
if { "$u_prompt" == "" } {
set u_prompt "(Username|Login|login|user name):"
} else {
set u_prompt [join [lindex $u_prompt 0] ""]
}
set p_prompt [find passprompt $router]
if { "$p_prompt" == "" } {
set p_prompt "(\[Pp]assword|passwd):"
} else {
set p_prompt [join [lindex $p_prompt 0] ""]
}
set e_prompt [find enableprompt $router]
if { "$e_prompt" == "" } {
set e_prompt "\[Pp]assword:"
} else {
set e_prompt [join [lindex $e_prompt 0] ""]
}
# Figure out cypher type
if {[info exists cypher]} {
# command line cypher type
set cyphertype $cypher
} else {
set cyphertype [find cyphertype $router]
if { "$cyphertype" == "" } { set cyphertype "3des" }
}
# Figure out connection method
set cmethod [find method $router]
if { "$cmethod" == "" } { set cmethod {{telnet} {ssh}} }
# Figure out the SSH executable name
set sshcmd [find sshcmd $router]
if { "$sshcmd" == "" } { set sshcmd {ssh} }
# Login to the router
if {[login $router $ruser $userpswd $passwd $enapasswd $cmethod $cyphertype]} {
continue
}
# Disable log junk being sent to terminal: must be done before $enacmd is run
# It would be nice for this to be setable in .cloginrc
send "undo terminal monitor\r"
expect -re $prompt {}
# Turn session paging off; this only works on models like 3Com 4800G and H3C
# Other models like 3Com 5500 have a screen-length command that only works on
# a vty basis
send "screen-length disable\r"
if { $enable } {
if {[do_enable $enauser $enapasswd]} {
if { $do_command || $do_script } {
close; wait
continue
}
}
}
# we are logged in, now figure out the full prompt
send "\r"
expect {
-re "\[\r\n]+" { exp_continue; }
-re "^.+$prompt" { set junk $expect_out(0,string);
regsub -all "\[\]\[]" $junk {\\&} prompt;
}
-re "^.+> \\\(enable\\\)" {
set junk $expect_out(0,string);
regsub -all "\[\]\[]" $junk {\\&} prompt;
}
}
if { $do_command } {
if {[run_commands $prompt $command]} {
continue
}
} elseif { $do_script } {
# # If the prompt is (enable), then we are on a switch and the
# # command is "set length 0"; otherwise its "term length 0".
# if [ regexp -- ".*> .*enable" "$prompt" ] {
# send "set length 0\r"
# send "set logging session disable\r"
# } else {
# send "term length 0\r"
# }
expect -re $prompt {}
source $sfile
close
} else {
label $router
log_user 1
interact
}
# End of for each router
wait
sleep 0.3
}
exit 0
More information about the Rancid-discuss
mailing list