[rancid] Rancid problem using h3c switches

[Ugo Bellavance]

Hi,

We've been using Rancid for our Cisco and Procurve switches, and since we
bought a pair of H3C s5800, I'd like to use rancid for them as well.

I followed the instructions here
http://sites.google.com/site/jrbinks/code/rancid/h3c (thanks Jethro) and
then I edited h3clogin to make sure the shebang pointed to the right
location of expect.  But I can't get it to work yet.

Here is what I get for the h3clogin command:

[rancid at rancid bin]$ h3clogin -autoenable -t 5 -c "dis device" switch1
atq-irf-1.atqlan.agri-tracabilite.qc.ca
spawn ssh -c 3des -x -l manager switch1
manager at switch1's password:

******************************************************************************
* Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
*
* Without the owner's prior written consent,
*
* no decompiling or reverse-engineering shall be allowed.
*
******************************************************************************

<SWITCH1>undo terminal monitor
Info: Current terminal monitor is off.

<SWITCH1>
<SWITCH1>
Error: TIMEOUT reached
===================

Any help would be appreciated.

Thanks,

Ugo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20101022/faeb8269/attachment.html>