[rancid] FW: Cisco

[Freeh Sophia]

Hi rancideers,

Just added a couple SAN switches (Cisco MDS 9216i, SAN-OS 3.3(3)) to
rancid using the regular device type cisco and receive the below
cycling outputs every hour:  What could cause this, a pager problem?
FWIW I've already added 'term width 0' to the usual 'terminal length
0' in bin/clogin to address the VLAN membership line-wrap behavior.

Thanks,

--Adam

Index: configs/s1
===================================================================
- -- configs/s1 (revision 1777)
- Hide quoted text -
@@ -135,10 +135,10 @@
 snmp-server enable traps fcs
 snmp-server enable traps rscn
 snmp-server enable traps vrrp
- snmp-server enable traps snmp authentication
 snmp-server enable traps fspf
 snmp-server enable traps fdmi
 snmp-server enable traps license
+ snmp-server enable traps snmp authentication
 zone mode enhanced vsan 10
 callhome
 snmp-server enable traps aaa server-state-change

Index: configs/s1
===================================================================
- -- configs/s1(revision 1816)
- Hide quoted text -
@@ -135,10 +135,10 @@
 snmp-server enable traps fcs
 snmp-server enable traps rscn
 snmp-server enable traps vrrp
+ snmp-server enable traps snmp authentication
 snmp-server enable traps fspf
 snmp-server enable traps fdmi
 snmp-server enable traps license
- snmp-server enable traps snmp authentication
 zone mode enhanced vsan 10
 callhome
 snmp-server enable traps aaa server-state-change


Freeh Sophia
Marketing GmbH
Emanuelstr. 3,
10317 Berlin
Deutschland
Telefon: +49 (33) 5310967
Email: freehsophia at gmail.com
Site: http://flug.airego.de/