[rancid] RANCID, CRS and SDR

[Jens Link]

Hi,

I'm having some problems with RANCID when querying CRS SDRs (Secure
Domain Router). RANCID is running once an hour and every time RANCID 
finds some differences in the hardware configuration. 

Here is an example:

This moring a 7 o'clock:
- !NAME: "0/0/* - host - Inlet0", DESCR: "Temperature Sensor"
- !VID: N/A
- !NAME: "0/0/* - host - Inlet1", DESCR: "Temperature Sensor"

And at 8 o'clock
+ !NAME: "0/0/* - host - Inlet0", DESCR: "Temperature Sensor"
+ !VID: N/A
+ !NAME: "0/0/* - host - Inlet1", DESCR: "Temperature Sensor"

This is not on related to sensors, I've also seen fan trays, interface
cards, ... appearing and disappearing. Any ideas? Querying the actual
(hardware) CRS works fine.

Regards

Jens
-- 
-------------------------------------------------------------------------
| Foelderichstr. 40   | 13595 Berlin, Germany    | +49-151-18721264     |
| http://blog.quux.de | jabber: jenslink at guug.de | -------------------  | 
-------------------------------------------------------------------------