[rancid] FWSM compatibility

[Jiménez Fernández, Mikel]

Hello,
 
I have succesfully  patched but I have some questions...
 
My intention is to login like a typical Cisco device and inside it, run commands (usercmd_chat may be...) but the login mode, what should be ?
 
I have to do "enable" and type the password... I can not use the "ssh" method ?
 
Can I use SSH method and then call usercmd-chat or what is the recomendation ? 
In the patch example I can see "add usercmd host {ssh} {-t} {-p 1234} {command ?¿?}" but what happen with password and "enable ?
 
Thanks and I hope I will solve it with your help guys!!
 
Thanks in advance.

________________________________

De: Ryan West [mailto:rwest at zyedge.com] 
Enviado el: miércoles, 02 de marzo de 2011 18:03
Para: Jiménez Fernández, Mikel; rancid-discuss at shrubbery.net
Asunto: RE: FWSM compatibility



Just edit clogin in the bin directory to add the patch.

-ryan

From: Jiménez Fernández, Mikel [mailto:m.jimenez at ibermatica.com] 
Sent: Wednesday, March 02, 2011 11:57 AM
To: Ryan West; rancid-discuss at shrubbery.net
Subject: RE: FWSM compatibility

So I have to download the source code, patch, compile and it should work ?

Thanks!

________________________________

De: Ryan West [mailto:rwest at zyedge.com] 
Enviado el: miércoles, 02 de marzo de 2011 17:43
Para: Jiménez Fernández, Mikel; rancid-discuss at shrubbery.net
Asunto: RE: FWSM compatibility

http://www.shrubbery.net/pipermail/rancid-discuss/2006-May/001490.html

It's a small patch to clogin, but still works in 2.3.6.

-ryan

From: Jiménez Fernández, Mikel [mailto:m.jimenez at ibermatica.com] 
Sent: Wednesday, March 02, 2011 11:28 AM
To: Ryan West; rancid-discuss at shrubbery.net
Subject: RE: FWSM compatibility

What do you want to say with "command / chat" ? 

I have to use admin context and "jump" from it...

Thanks!!

________________________________

De: Ryan West [mailto:rwest at zyedge.com] 
Enviado el: miércoles, 02 de marzo de 2011 17:26
Para: Jiménez Fernández, Mikel; rancid-discuss at shrubbery.net
Asunto: RE: FWSM compatibility

User command / chat might do the trick for you, or create a management interface for the contexts and back them as normal firewalls.

-ryan

From: rancid-discuss-bounces at shrubbery.net [mailto:rancid-discuss-bounces at shrubbery.net] On Behalf Of Jiménez Fernández, Mikel
Sent: Wednesday, March 02, 2011 11:06 AM
To: rancid-discuss at shrubbery.net
Subject: [rancid] FWSM compatibility

Hi!

First of all, I have to say that I have read numerous of forums before asking here anything.

I want to backup Cisco FWSM 3.x and 4.x contexts configurations. Is possible with actual Rancid/Clogin ?

Actually I define a file with the commands, but when I change from admin context to fwlearning2 context, the session get "stalled", here the output.

[rancid at jazznetmon rancid]$ clogin -x file -u mike -p "kikoko"  -e kikoko 172.24.133.40

172.24.133.40

spawn ssh -c 3des -x -l mike 172.24.133.40

mike at 172.24.133.40's password: 

*********************************************

 FWSM - FIREWALL SERVICES MODULE

 Dtpo. COMUNICACIONES IBERMATICA 913849100

*********************************************

Type help or '?' for a list of available commands.

fwcat1/admin> enable

Password: ******

fwcat1/admin# 

fwcat1/admin# terminal length 0

                       ^

ERROR: % Invalid input detected at '^' marker.

fwcat1/admin#  changeto context fwelearning2  -- "(stalled....)

And here the file with the commands:

[rancid at jazznetmon ~]$ cat file 

changeto context fwelearning2

config t

sh run

I doesn´t work to run commands inside another context...

Any ideas ?

Thanks!!

Mikel Jimenez Fernandez

Departamento de Comunicaciones

Ibermatica

Tlf: 91 384 9100 ext 7561

Camino de Hormigueras, 172

28031 MADRID

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20110308/744cd973/attachment.html>