[rancid] HP Procurve 2810

[Gerhard Mourani]

Hello List,

I've problem making Rancid (version 2.3.6) work with HP Procurve 2810 switches. I'm able to connect to the switch correctly but the generated report is empty! If I check inside the log files, I can see the following:

10.1.6.254: found unexpected command - "show system"
10.1.6.254: missed cmd(s): show stack,write term
10.1.6.254: End of run not found

I use the following parameters in my .cloginrc file:
add autoenable  10.1.6.254          1
add user                10.1.6.254          myadmin
add password    10.1.6.254           mypassword      myenpassword

Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20111018/c6a4fcb9/attachment.html>