[rancid] Rancid Script for IBM BNT Switches
Jonathan Mills
jonmills at renci.org
Wed Apr 18 21:02:52 UTC 2012
I'm emailing the list with an update about IBM BNT switches.
Specifically, the G8052 and G8264 (and maybe others). I've attached a
tarball of my 'bntrancid' script, which is working just fine for me.
It works with 'clogin', and I'm specifying
RANCID-CONTENT-TYPE: ibmbnt
to distinguish these from older BNT switches, prior to the IBM
acquisition, which may have used Bladeos or other OS.
The IBM BNT G8052 and G8264 run:
!
version "6.8.1"
switch-type "IBM Networking Operating System RackSwitch G8052"
!
In my /usr/libexec/rancid/rancid-fe file, I update the %vendortable to
include an entry like:
'ibmbnt' => 'bntrancid',
and then, in my router.db file, I use
8052.example.com:ibmbnt:up
##
##
##
One note on the script. These switches support a "strong password"
mode, and if you enable it, then the root password will expire every X
number of days. There's no way to prevent the expiration if you use
"strong password enable". Worse, upon login, a password expiration
warning dialogue will pop up, and it will break my 'bntrancid' script.
I did not write any extra expect code to handle that. Upon the advice
of IBM, we chose to disable the strong password enforcement mechanism.
You can still choose to set a strong password, which we did ;-)
##
##
##
My sincere thanks to all those who provided advice and got me moving in
the right direction on this.
Cheers,
--
Jonathan Mills
Systems Administrator
Renaissance Computing Institute
UNC-Chapel Hill
-------------------------------------------------------------------------------
#! /usr/bin/perl
##
## $Id: rancid.in 2272 2011-01-10 20:01:58Z heas $
##
## rancid 2.3.6
## Copyright (c) 1997-2009 by Terrapin Communications, Inc.
## All rights reserved.
##
## This code is derived from software contributed to and maintained by
## Terrapin Communications, Inc. by Henry Kilmer, John Heasley, Andrew
Partan,
## Pete Whiting, Austin Schutz, and Andrew Fort.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
## 1. Redistributions of source code must retain the above copyright
## notice, this list of conditions and the following disclaimer.
## 2. Redistributions in binary form must reproduce the above copyright
## notice, this list of conditions and the following disclaimer in the
## documentation and/or other materials provided with the distribution.
## 3. All advertising materials mentioning features or use of this software
## must display the following acknowledgement:
## This product includes software developed by Terrapin
Communications,
## Inc. and its contributors for RANCID.
## 4. Neither the name of Terrapin Communications, Inc. nor the names of its
## contributors may be used to endorse or promote products derived from
## this software without specific prior written permission.
## 5. It is requested that non-binding fixes and modifications be
contributed
## back to Terrapin Communications, Inc.
##
## THIS SOFTWARE IS PROVIDED BY Terrapin Communications, INC. AND
CONTRIBUTORS
## ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED
## TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR
## PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COMPANY OR CONTRIBUTORS
## BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
## CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
## SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
## INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
## CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE
## POSSIBILITY OF SUCH DAMAGE.
#
# RANCID - Really Awesome New Cisco confIg Differ
#
# usage: rancid [-dV] [-l] [-f filename | hostname]
#
use Getopt::Std;
getopts('dflV');
if ($opt_V) {
print "rancid 2.3.6\n";
exit(0);
}
$log = $opt_l;
$debug = $opt_d;
$file = $opt_f;
$host = $ARGV[0];
$proc = "";
$ios = "IOS";
$clean_run = 0;
$found_end = 0;
$found_version = 0;
$found_env = 0;
$found_diag = 0;
$timeo = 30; # clogin timeout in seconds
my(@commandtable, %commands, @commands);# command lists
my($aclsort) = ("ipsort"); # ACL sorting mode
my($config_register); # configuration register value
my($filter_commstr); # SNMP community string filtering
my($filter_pwds); # password filtering mode
# This routine is used to print out the router configuration
sub ProcessHistory {
my($new_hist_tag,$new_command,$command_string, at string) = (@_);
if ((($new_hist_tag ne $hist_tag) || ($new_command ne $command))
&& scalar(%history)) {
print eval "$command \%history";
undef %history;
}
if (($new_hist_tag) && ($new_command) && ($command_string)) {
if ($history{$command_string}) {
$history{$command_string} = "$history{$command_string}@string";
} else {
$history{$command_string} = "@string";
}
} elsif (($new_hist_tag) && ($new_command)) {
$history{++$#history} = "@string";
} else {
print "@string";
}
$hist_tag = $new_hist_tag;
$command = $new_command;
1;
}
sub numerically { $a <=> $b; }
# This is a sort routine that will sort numerically on the
# keys of a hash as if it were a normal array.
sub keynsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort numerically keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# keys of a hash as if it were a normal array.
sub keysort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort keys(%lines)) {
$sorted_lines[$i] = $lines{$key};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# values of a hash as if it were a normal array.
sub valsort{
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $key (sort values %lines) {
$sorted_lines[$i] = $key;
$i++;
}
@sorted_lines;
}
# This is a numerical sort routine (ascending).
sub numsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $num (sort {$a <=> $b} keys %lines) {
$sorted_lines[$i] = $lines{$num};
$i++;
}
@sorted_lines;
}
# This is a sort routine that will sort on the
# ip address when the ip address is anywhere in
# the strings.
sub ipsort {
local(%lines) = @_;
local($i) = 0;
local(@sorted_lines);
foreach $addr (sort sortbyipaddr keys %lines) {
$sorted_lines[$i] = $lines{$addr};
$i++;
}
@sorted_lines;
}
# These two routines will sort based upon IP addresses
sub ipaddrval {
my(@a) = ($_[0] =~ m#^(\d+)\.(\d+)\.(\d+)\.(\d+)$#);
$a[3] + 256 * ($a[2] + 256 * ($a[1] +256 * $a[0]));
}
sub sortbyipaddr {
&ipaddrval($a) <=> &ipaddrval($b);
}
# This routine parses "show version"
sub ShowVersion {
print STDERR " In ShowVersion: $_" if ($debug);
my($slaveslot);
while (<INPUT>) {
tr/\015//d;
if (/^$prompt/) { $found_version = 1; last};
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(0) if ($found_version); # Only do this routine once
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^Slave in slot (\d+) is running/) {
$slave = " Slave:";
$slaveslot = ", slot $1";
next;
}
if (/cisco ios .* IOS-XE/i) { $ios = "XE"; }
if (/^Application and Content Networking .*Software/) { $type = "CE"; }
# treat the ACE like the Content Engines for matching endofconfig
if (/^Cisco Application Control Software/) { $type = "CE"; }
if (/^Cisco Storage Area Networking Operating System/) { $type = "SAN";}
if (/^Cisco Nexus Operating System/) { $type = "NXOS";}
/^Application and Content Networking Software Release /i &&
ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
/^Cisco Secure PIX /i &&
ProcessHistory("COMMENTS","keysort","F1", "!Image: $_") && next;
# ASA "time-based licenses" - eg: bot-net
/^This (PIX|platform) has a time-based license that will expire
in\s+(\d{2,})\s+day.*$/ &&
ProcessHistory("COMMENTS","keysort","D1",
"!This $1 has a time-based license\n") && next;
# PIX 6 fail-over license, as in "This PIX has an Unrestricted (UR)
# license." PIX 7 as "his platform has ..."
/^This (PIX|platform) has an?\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","D1", "!$_") && next;
/^(Cisco )?IOS .* Software,? \(([A-Za-z0-9_-]*)\), .*Version\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","F1",
"!Image:$slave Software: $2, $3\n") && next;
/^([A-Za-z-0-9_]*) Synced to mainline version: (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F2",
"!Image:$slave $1 Synced to mainline version: $2\n") && next;
/^Compiled (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F3",
"!Image:$slave Compiled: $1\n") && next;
/^ROM: (IOS \S+ )?(System )?Bootstrap.*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G1",
"!ROM Bootstrap: $3\n") && next;
if (/^Hardware:\s+(.*), (.* RAM), CPU (.*)$/) {
ProcessHistory("COMMENTS","keysort","A1",
"!Chassis type: $1 - a PIX\n");
ProcessHistory("COMMENTS","keysort","A2",
"!CPU: $3\n");
ProcessHistory("COMMENTS","keysort","B1", "!Memory: $2\n");
}
/^serial number:\s+(.*)$/i &&
ProcessHistory("COMMENTS","keysort","C1", "!Serial Number: $1") &&
next;
# More PIX stuff
/^Encryption hardware device\s+:\s+(.*)/ &&
ProcessHistory("COMMENTS","keysort","A3", "!Encryption: $1\n") &&
next;
/^running activation key\s*:\s+(.*)/i &&
ProcessHistory("COMMENTS","keysort","D2", "!Key: $1\n") &&
next;
# Flash on the PIX or FWSM (FireWall Switch Module)
/^Flash(\s+\S+)+ \@ 0x\S+,\s+(\S+)/ &&
ProcessHistory("COMMENTS","keysort","B2", "!Memory: Flash $2\n") &&
next;
# CatOS 3500xl stuff
/^system serial number\s*:\s+(.*)$/i &&
ProcessHistory("COMMENTS","keysort","C1", "!Serial Number: $1\n") &&
next;
/^Model / &&
ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
/^Motherboard / &&
ProcessHistory("COMMENTS","keysort","C3", "!$_") && next;
/^Power supply / &&
ProcessHistory("COMMENTS","keysort","C4", "!$_") && next;
/^Activation Key:\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","C2", "!$_") && next;
/^ROM: \d+ Bootstrap .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G2",
"!ROM Image: Bootstrap $1\n!\n") && next;
/^ROM: .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G3","!ROM Image: $1\n") && next;
/^BOOTFLASH: .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G4","!BOOTFLASH: $1\n") && next;
/^BOOTLDR: .*(Version.*)$/ &&
ProcessHistory("COMMENTS","keysort","G4","!BOOTLDR: $1\n") && next;
/^System image file is "([^\"]*)", booted via (\S*)/ &&
# removed the booted source due to
# CSCdk28131: cycling info in 'sh ver'
# ProcessHistory("COMMENTS","keysort","F4","!Image: booted via $2, $1\n") &&
ProcessHistory("COMMENTS","keysort","F4","!Image: booted $1\n") &&
next;
/^System image file is "([^\"]*)"$/ &&
ProcessHistory("COMMENTS","keysort","F5","!Image: $1\n") && next;
if
(/(\S+(?:\sseries)?)\s+(?:\((\S+)\)\s+processor|\(revision[^)]+\)).*\s+with
(\S+k) bytes/i) {
$proc = $1;
my($cpu) = $2;
my($mem) = $3;
my($device) = "router";
# the next line ought to be the more specific cpu info, grab it.
# yet, some boards/IOS vers have a processor ID line between these
# two. grrr. make sure we dont grab the "software" junk that
# follows these lines by looking for "CPU at " or the 2600s
# "processor: " unique string. there are undoubtedly many other
# incantations. for a slave, we dont get this info, its just a
# blank line.
$_ = <INPUT>;
if (/processor board id/i) {
my($sn);
if (/processor board id (\S+)/i) {
$sn = $1;
$sn =~ s/,$//;
ProcessHistory("COMMENTS","keysort","D9",
"!Processor ID: $sn\n");
}
$_ = <INPUT>;
}
$_ = "" if (! /(cpu at |processor: |$cpu processor,)/i);
tr/\015//d;
s/implementation/impl/i;
if ($_ !~ /^\s*$/) {
chomp;
s/^/, /;
}
if ($proc eq "CSC") {
$type = "AGS";
} elsif ($proc eq "CSC4") {
$type = "AGS+";
} elsif ($proc =~ /1900/) {
$type = "1900";
$device = "switch";
} elsif ($proc =~ /^(AS)?25[12][12]/) {
$type = "2500";
} elsif ($proc =~ /261[01]/ || $proc =~ /262[01]/ ) {
$type = "2600";
} elsif ($proc =~ /WS-C29/) {
$type = "2900XL";
$device = "switch";
} elsif ($proc =~ /WS-C355/) {
$type = "3550";
$device = "switch";
} elsif ($proc =~ /WS-C35/) {
$type = "3500XL";
$device = "switch";
} elsif ($proc =~ /^36[0246][0-9]/) {
$type = "3600";
} elsif ($proc =~ /^37/) {
$type = "3700";
} elsif ($proc =~ /^38/) {
$type = "3800";
} elsif ($proc =~ /WS-C45/) {
$type = "4500";
$device = "switch";
} elsif ( $proc =~ /^AS5300/) {
$type = "AS5300";
} elsif ( $proc =~ /^AS5350/) {
$type = "AS5350";
} elsif ( $proc =~ /^AS5400/) {
$type = "AS5400";
} elsif ($proc =~ /6000/) {
$type = "6000";
$device = "switch";
} elsif ($proc eq "WK-C65") {
$type = "6500";
} elsif ($proc eq "RP") {
$type = "7000";
} elsif ($proc eq "RP1") {
$type = "7000";
} elsif ($proc =~ /720[246]/) {
$type = "7200";
} elsif ( $proc =~ /^73/) {
$type = "7300";
} elsif ($proc eq "RSP7000") {
$type = "7500";
} elsif ($proc =~ /RSP\d/) {
$type = "7500";
} elsif ($proc =~ /OSR-76/) {
$type = "7600";
} elsif ($proc =~ /CISCO76/) {
$type = "7600";
} elsif ($proc =~ /1200[48]\/(GRP|PRP)/ || $proc =~
/1201[26]\/(GRP|PRP)/) {
$type = "12000";
} elsif ($proc =~ /1201[26]-8R\/(GRP|PRP)/) {
$type = "12000";
} elsif ($proc =~ /1240[48]\/(GRP|PRP)/ || $proc =~
/1241[06]\/(GRP|PRP)/) {
$type = "12400";
} else {
$type = $proc;
}
print STDERR "TYPE = $type\n" if ($debug);
ProcessHistory("COMMENTS","keysort","A1",
"!Chassis type:$slave $proc - a $type $device\n");
ProcessHistory("COMMENTS","keysort","B1",
"!Memory:$slave main $mem\n");
if (defined($cpu)) {
ProcessHistory("COMMENTS","keysort","A3",
"!CPU:$slave $cpu$_$slaveslot\n");
}
next;
}
if (/(\S+) Silicon\s*Switch Processor/) {
if (!defined($C0)) {
$C0 = 1; ProcessHistory("COMMENTS","keysort","C0","!\n");
}
ProcessHistory("COMMENTS","keysort","C2","!SSP: $1\n");
$ssp = 1;
$sspmem = $1;
next;
}
/^(\d+[kK]) bytes of multibus/ &&
ProcessHistory("COMMENTS","keysort","B2",
"!Memory: multibus $1\n") && next;
/^(\d+[kK]) bytes of (non-volatile|NVRAM)/ &&
ProcessHistory("COMMENTS","keysort","B3",
"!Memory: nvram $1\n") && next;
/^(\d+[kK]) bytes of flash memory/ &&
ProcessHistory("COMMENTS","keysort","B5","!Memory: flash $1\n") &&
next;
/^(\d+[kK]) bytes of .*flash partition/ &&
ProcessHistory("COMMENTS","keysort","B6",
"!Memory: flash partition $1\n") && next;
/^(\d+[kK]) bytes of Flash internal/ &&
ProcessHistory("COMMENTS","keysort","B4",
"!Memory: bootflash $1\n") && next;
if (/^(\d+[kK]) bytes of (Flash|ATA)?.*PCMCIA .*(slot|disk) ?(\d)/i) {
ProcessHistory("COMMENTS","keysort","B7",
"!Memory: pcmcia $2 $3$4 $1\n");
next;
}
if (/^(\d+[kK]) bytes of (slot|disk)(\d)/i) {
ProcessHistory("COMMENTS","keysort","B7",
"!Memory: pcmcia $2$3 $1\n");
next;
}
if (/^WARNING/) {
if (!defined($I0)) {
$I0 = 1;
ProcessHistory("COMMENTS","keysort","I0","!\n");
}
ProcessHistory("COMMENTS","keysort","I1","! $_");
}
if (/^Configuration register is (.*)$/) {
$config_register = $1;
next;
}
if (/^Configuration register on node \S+ is (.*)$/) {
$config_register = $1 if (length($config_register) < 1);
next;
}
}
return(0);
}
# This routine parses "show redundancy"
sub ShowRedundancy {
print STDERR " In ShowRedundancy: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^Version information for secondary in slot (\d+):/) {
$slave = " Slave:";
$slaveslot = ", slot $1";
next;
}
/^IOS .* Software \(([A-Za-z0-9_-]*)\), .*Version\s+(.*)$/ &&
ProcessHistory("COMMENTS","keysort","F1",
"!Image:$slave Software: $1, $2\n") && next;
/^Compiled (.*)$/ &&
ProcessHistory("COMMENTS","keysort","F3",
"!Image:$slave Compiled: $1\n") && next;
}
return(0);
}
# This routine parses "show IDprom"
sub ShowIDprom {
my($tmp);
print STDERR " In ShowIDprom: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
/FRU is .(.*)\'/ && ($tmp = $1);
/Product Number = .(.*)\'/ &&
ProcessHistory("COMMENTS","keysort","D0",
"!Catalyst Chassis type: $1, $tmp\n");
/Serial Number = .([0-9A-Za-z]+)/ &&
ProcessHistory("COMMENTS","keysort","D1",
"!Catalyst Chassis S/N: $1\n");
/Manufacturing Assembly Number = .([-0-9]+)/ && ($tmp = $1);
/Manufacturing Assembly Revision = .(.*)\'/ && ($tmp .= ", rev " . $1);
/Hardware Revision = ([0-9.]+)/ &&
ProcessHistory("COMMENTS","keysort","D2",
"!Catalyst Chassis assembly: $tmp, ver $1\n");
}
return(0);
}
# This routine parses "show install active"
sub ShowInstallActive {
print STDERR " In ShowInstallActive: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/^\s*\^\s*$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
ProcessHistory("COMMENTS","keysort","F5","!Image: $_") && next;
}
return(0);
}
# This routine parses "show env all"
sub ShowEnv {
# Skip if this is not a 7500, 7200, or 7000.
print STDERR " In ShowEnv: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
if (/^$prompt/) { $found_env = 1; last};
next if (/^(\s*|\s*$cmd\s*)$/);
#return(1) if ($type !~ /^7/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(0) if ($found_env); # Only do this routine once
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (!defined($E0)) {
$E0 = 1;
ProcessHistory("COMMENTS","keysort","E0","!\n");
}
if (/^Arbiter type (\d), backplane type (\S+)/) {
if (!defined($C0)) {
$C0 = 1; ProcessHistory("COMMENTS","keysort","C0","!\n");
}
ProcessHistory("COMMENTS","keysort","C1",
"!Enviromental Arbiter Type: $1\n");
ProcessHistory("COMMENTS","keysort","A2",
"!Chassis type: $2 backplane\n");
next;
}
/^Power Supply Information$/ && next;
/^\s*Power Module\s+Voltage\s+Current$/ && next;
/^\s*(Power [^:\n]+)$/ &&
ProcessHistory("COMMENTS","keysort","E1","!Power: $1\n") && next;
/^\s*(Lower Power .*)/i &&
ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
/^\s*(redundant .*)/i &&
ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
/^\s*(RPS is .*)/i &&
ProcessHistory("COMMENTS","keysort","E2","!Power: $1\n") && next;
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show rsp chassis-info" for the rsp
# This will create arrays for hw info.
sub ShowRSP {
print STDERR " In ShowRSP: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# return(1) if ($type !~ /^12[40]/);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
/^$/ && next;
/^\s+Chassis model: (\S+)/ &&
ProcessHistory("COMMENTS","keysort","D1",
"!RSP Chassis model: $1\n") &&
next;
/^\s+Chassis S\/N: (.*)$/ &&
ProcessHistory("COMMENTS","keysort","D2",
"!RSP Chassis S/N: $1\n") &&
next;
}
return(0);
}
# This routine parses "show gsr chassis-info" for the gsr
# This will create arrays for hw info.
sub ShowGSR {
# Skip if this is not a 1200n.
print STDERR " In ShowGSR: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# return(1) if ($type !~ /^12[40]/);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
/^$/ && next;
/^\s+Chassis: type (\S+) Fab Ver: (\S+)/ &&
ProcessHistory("COMMENTS","keysort","D1",
"!GSR Chassis type: $1 Fab Ver: $2\n") &&
next;
/^\s+Chassis S\/N: (.*)$/ &&
ProcessHistory("COMMENTS","keysort","D2",
"!GSR Chassis S/N: $1\n") &&
next;
/^\s+PCA: (\S+)\s*rev: (\S+)\s*dev: \S+\s*HW ver: (\S+)$/ &&
ProcessHistory("COMMENTS","keysort","D3",
"!GSR Backplane PCA: $1, rev $2, ver $3\n") &&
next;
/^\s+Backplane S\/N: (\S+)$/ &&
ProcessHistory("COMMENTS","keysort","D4",
"!GSR Backplane S/N: $1\n") &&
next;
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show boot"
sub ShowBoot {
# Pick up boot variables if 7000/7200/7500/12000/2900/3500;
# otherwise pick up bootflash.
print STDERR " In ShowBoot: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/^\s*\^\s*$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(1) if (/Ambiguous command/i);
return(1) if (/(Open device \S+ failed|Error opening \S+:)/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
next if /CONFGEN variable/;
if (!defined($H0)) {
$H0 = 1; ProcessHistory("COMMENTS","keysort","H0","!\n");
}
if ($type !~ /^(12[04]|7)/) {
if ($type !~ /^(29|35)00/) {
ProcessHistory("COMMENTS","keysort","H2","!BootFlash: $_");
} else {
ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
}
} elsif (/(variable|register)/) {
ProcessHistory("COMMENTS","keysort","H1","!Variable: $_");
}
}
ProcessHistory("COMMENTS","","","!\n");
return(0);
}
# This routine parses "show flash"
sub ShowFlash {
# skip if this is 7000, 7200, 7500, or 12000; else we end up with
# redundant data from dir /all slot0:
print STDERR " In ShowFlash: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if ($type =~ /^(12[40]|7)/);
return(1) if ($ios eq "XE");
return(1) if (/^\s*\^\s*$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
# Filter dhcp database
next if (/dhcp_[^. ]*\.txt/);
/\s+(multiple-fs|nv_hdr|vlan\.dat)$/ && next;
ProcessHistory("FLASH","","","!Flash: $_");
}
ProcessHistory("","","","!\n");
return;
}
# This routine parses "dir /all ((disk|slot)N|bootflash|nvram):"
sub DirSlotN {
print STDERR " In DirSlotN: $_" if ($debug);
my($dev) = (/\s([^\s]+):/);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(1) if (/(No such device|Error Sending Request)/i);
return(1) if (/\%Error: No such file or directory/);
return(1) if (/No space information available/);
# Corrupt flash
/\%Error calling getdents / &&
ProcessHistory("FLASH","","","!Flash: $dev: $_") && next;
return(-1) if (/\%Error calling/);
return(-1) if (/(: device being squeezed|ATA_Status time out)/i); # busy
return(-1) if (/\%Error opening \S+:\S+ \(Device or resource busy\)/i);
return(-1) if (/command authorization failed/i);
return(1) if (/(Open device \S+ failed|Error opening \S+:)/);
# filter frequently changing files from IOX bootflash
if ($dev =~ /bootflash/) {
next if (/temp_cont\s*$/);
next if (/uptime_cont\s*$/);
}
# Filter dhcp database
next if (/dhcp_[^. ]*\.txt/);
if ($ios eq "XE" && /.*\((\d+) bytes free\)/) {
my($tmp) = $1;
if ($tmp >= (1024 * 1024 * 1024)) {
$tmp = int($tmp / (1024 * 1024 * 1024));
s/$1 bytes free/$tmp GB free/;
} else {
$tmp = int($tmp / (1024 * 1024));
s/$1 bytes free/$tmp MB free/;
}
}
if ($ios eq "XE" && /^((\s+)?\d+\s+\S+)\s+\d+.*(tracelogs$)/) {
$_ = "$1" . sprintf("%43s", "") . "$3\n";
}
if ($ios eq "IOS" && /^((\s+)?\d+\s+\S+)\s+\d+.*(sflog$)/) {
$_ = "$1" . sprintf("%43s", "") . "$3\n";
}
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
ProcessHistory("FLASH","","","!Flash: $dev: $_");
}
ProcessHistory("","","","!\n");
return(0);
}
# This routine parses "show controllers"
sub ShowContAll {
# Skip if this is a 70[01]0, 7500, or 12000.
print STDERR " In ShowContAll: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
# return(1) if ($type =~ /^(12[40]|7[05])/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^Interface ([^ \n(]*)/) { $INT = "$1, "; next; }
/^(BRI unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^LANCE unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^(LANCE unit \d)/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/(Media Type is \S+),/ &&
ProcessHistory("INT","","","!\t$1\n");
if (/(M\dT[^ :]*:) show controller:$/) {
my($ctlr) = $1;
$_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr $_");
}
if (/^(\S+) : show controller:$/) {
my($ctlr) = $1;
$_ = <INPUT>; tr/\015//d; s/ subunit \d,//;
ProcessHistory("INT","","","!Interface: $ctlr: $_");
}
/^(HD unit \d), idb/ &&
ProcessHistory("INT","","","!Interface: $1\n") && next;
/^HD unit \d, NIM/ &&
ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ HD unit \d, (.*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^AM79970 / && ProcessHistory("INT","","","!Interface: $_") && next;
/^buffer size \d+ (Universal Serial: .*)/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^Hardware is (.*)/ &&
ProcessHistory("INT","","","!Interface: $INT$1\n") && next;
/^(QUICC Serial unit \d),/ &&
ProcessHistory("INT","","","!$1\n") && next;
/^QUICC Ethernet .*/ &&
ProcessHistory("INT","","","!$_") && next;
/^DTE .*\.$/ &&
ProcessHistory("INT","","","!\t$_") && next;
/^(cable type :.*),/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^(.* cable.*), received clockrate \d+$/ &&
ProcessHistory("INT","","","!\t$1\n") && next;
/^.* cable.*$/ &&
ProcessHistory("INT","","","!\t$_") && next;
}
return(0);
}
# This routine parses "show controllers cbus"
# Some of this is printed out in ShowDiagbus.
sub ShowContCbus {
# Skip if this is not a 7000 or 7500.
print STDERR " In ShowContCbus: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
#return(1) if ($type !~ /^7[05]0/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^\s*slot(\d+): ([^,]+), hw (\S+), sw (\S+), ccb/) {
$slot = $1;
$board{$slot} = $2;
$hwver{$slot} = $3;
$hwucode{$slot} = $4;
} elsif (/^\s*(\S+) (\d+), hardware version (\S+), microcode version
(\S+)/) {
$slot = $2;
$board{$slot} = $1;
$hwver{$slot} = $3;
$hwucode{$slot} = $4;
} elsif (/(Microcode .*)/) {
$ucode{$slot} = $1;
} elsif (/(software loaded .*)/) {
$ucode{$slot} = $1;
} elsif (/(\d+) Kbytes of main memory, (\d+) Kbytes cache memory/) {
$hwmemd{$slot} = $1;
$hwmemc{$slot} = $2;
} elsif (/byte buffers/) {
chop;
s/^\s*//;
$hwbuf{$slot} = $_;
} elsif (/Interface (\d+) - (\S+ \S+),/) {
$interface = $1;
ProcessHistory("HW","","",
"!\n!Int $interface: in slot $slot, named $2\n"); next;
} elsif (/(\d+) buffer RX queue threshold, (\d+) buffer TX queue limit,
buffer size (\d+)/) {
ProcessHistory("HW","","","!Int $interface: rxq $1, txq $2, bufsize
$3\n");
next;
}
}
return(0);
}
# This routine parses "show debug"
sub ShowDebug {
print STDERR " In ShowDebug: $_" if ($debug);
my($lines) = 0;
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
/^No matching debug flags set$/ && next;
/^No debug flags set$/ && next;
ProcessHistory("COMMENTS","keysort","J1","!DEBUG: $_");
$lines++;
}
if ($lines) {
ProcessHistory("COMMENTS","keysort","J0","!\n");
}
return(0);
}
# This routine parses "show diagbus"
# This will create arrays for hw info.
sub ShowDiagbus {
# Skip if this is not a 7000, 70[01]0, or 7500.
print STDERR " In ShowDiagbus: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
#return(1) if ($type !~ /^7[05]/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^\s*Slot (\d+):/i) {
$slot = $1;
next;
} elsif (/^\s*Slot (\d+) \(virtual\):/i) {
$slot = $1;
next;
} elsif (/^\s*(.*Processor.*|.*controller|.*controler|.*Chassis
Interface)(, FRU\s?:.*)?, HW rev (\S+), board revision (\S+)/i) {
$board = $1;
$hwver = $3;
$boardrev = $4;
if ($board =~ /Processor/) {
if ($board =~ /7000 Route\/Switch/) {
$board = "RSP7000";
} elsif ($board =~ /Route\/Switch Processor (\d)/) {
$board = "RSP$1";
} elsif ($board =~ /Route/) {
$board = "RP";
} elsif ($board =~ /Silicon Switch/) {
$board = "SSP";
} elsif ($board =~ /Switch/) {
$board = "SP";
$board = "SSP $sspmem" if $ssp;
} elsif ($board =~ /ATM/) {
$board = "AIP";
}
} elsif ($board =~ /(.*) controller/i) {
$board = $1;
}
# hwucode{$slot} defined in ShowContCbus
if (defined $hwucode{$slot}) {
ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev
$boardrev ucode $hwucode{$slot}\n");
} else {
ProcessHistory("SLOT","","","!\n!Slot $slot/$board: hvers $hwver rev
$boardrev\n");
}
# These are also from the ShowContCbus
ProcessHistory("SLOT","","","!Slot $slot/$board: $ucode{$slot}\n")
if (defined $ucode{$slot});
ProcessHistory("SLOT","","","!Slot $slot/$board: memd
$hwmemd{$slot}, cache $hwmemc{$slot}\n")
if ((defined $hwmemd{$slot}) && (defined $hwmemc{$slot}));
ProcessHistory("SLOT","","","!Slot $slot/$board: $hwbuf{$slot}\n")
if (defined $hwbuf{$slot});
next;
}
/Serial number: (\S+)\s*Part number: (\S+)/ &&
ProcessHistory("SLOT","","",
"!Slot $slot/$board: part $2, serial $1\n") &&
next;
/^\s*Controller Memory Size: (.*)$/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: $1\n") &&
next;
if (/PA Bay (\d) Information/) {
$pano = $1;
if ("PA" =~ /$board/) {
($s,$c) = split(/\//,$board);
$board = "$s/$c/PA $pano";
} else {
$board =~ s/\/PA \d//;
$board = "$board/PA $pano";
}
next;
}
/\s+(.*) (IP|PA), (\d) ports?,( \S+,)? (FRU\s?: )?(\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: type $6, $3
ports\n") &&
next;
/\s+(.*) (IP|PA)( \(\S+\))?, (\d) ports?/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: type $1$3, $4
ports\n") &&
next;
/^\s*HW rev (\S+), Board revision (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: hvers $1 rev $2\n") &&
next;
/Serial number: (\S+)\s*Part number: (\S+)/ &&
ProcessHistory("SLOT","","","!Slot $slot/$board: part $2, serial
$1\n") && next;
}
return(0);
}
# This routine parses "show diag" for the gsr, 7200, 3700, 3600, 2600.
# This will create arrays for hw info.
sub ShowDiag {
print STDERR " In ShowDiag: $_" if ($debug);
while (<INPUT>) {
REDUX: tr/\015//d;
if (/^$prompt/) { $found_diag = 1; last};
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(0) if ($found_diag); # Only do this routine once
return(-1) if (/command authorization failed/i);
/^$/ && next;
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
s/Port Packet Over SONET/POS/;
if (/^\s*SLOT\s+(\d+)\s+\((.*)\): (.*)/) {
$slot = $1;
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","A","!Slot $slot: $3\n");
next;
}
if (/^\s*NODE\s+(\S+) : (.*)/) {
$slot = $1;
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","A","!Slot $slot: $2\n");
next;
}
if (/^\s*PLIM\s+(\S+) : (.*)/) {
$slot = $1 . " PLIM";
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","A","!Slot $slot: $2\n");
next;
}
if (/^\s*RACK\s+(\S+) : (.*)/) {
$slot = "Rack/" . $1;
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","A","!Slot $slot: $2\n");
next;
}
if (/^\s+MAIN:\s* type \S+,\s+(.*)/) {
local($part) = $1;
$_ = <INPUT>;
if (/^\s+(HW version|Design Release) (\S+)\s+S\/N (\S+)/i) {
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part $part,
serial $3\n");
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: hvers $2\n");
} else {
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part $part\n");
goto REDUX;
}
next;
}
if (/^\s+MAIN:\s* board type \S+$/) {
$_ = <INPUT>;
tr/\015//d;
if (/^\s+(.+)$/) {
local($part) = $1;
$_ = <INPUT>;
tr/\015//d;
if (/^\s+dev (.*)$/) {
local($dev) = $1;
$_ = <INPUT>;
if (/^\s+S\/N (\S+)/) {
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part $part,
dev $dev, serial $1\n");
} else {
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part $part,
dev $dev\n");
goto REDUX;
}
} else {
ProcessHistory("SLOT","keysort","AM","!Slot $slot/MAIN: part
$part\n");
goto REDUX;
}
} else {
goto REDUX;
}
next;
}
if (/^c3700\s+(io-board|mid-plane)/i) {
$slot = $1;
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","A","!Slot $slot: part $1\n");
next;
}
if (/ Engine:\s+(.*)/) {
ProcessHistory("SLOT","keysort","AE","!Slot $slot/Engine: $1\n");
}
if (/FRU:\s+Linecard\/Module:\s+(\S+)/) {
ProcessHistory("SLOT","keysort","AF","!Slot $slot/FRU:
Linecard/Module: $1\n");
next;
}
if (/\s+Processor Memory:\s+(\S+)/) {
ProcessHistory("SLOT","keysort","AF","!Slot $slot/FRU: Processor
Memory: $1\n");
next;
}
if (/\s+Packet Memory:\s+(\S+)/) {
ProcessHistory("SLOT","keysort","AF","!Slot $slot/FRU: Packet
Memory: $1\n");
next;
}
if (/\s+Route Memory:\s+(\S+)/) {
ProcessHistory("SLOT","keysort","AF","!Slot $slot/FRU: Route
Memory: $1\n");
next;
}
if (/^\s+PCA:\s+(.*)/) {
local($part) = $1;
$_ = <INPUT>;
if (/^\s+(HW version|design release) (\S+)\s+S\/N (\S+)/i) {
ProcessHistory("SLOT","keysort","C1","!Slot $slot/PCA: part $part,
serial $3\n");
ProcessHistory("SLOT","keysort","C2","!Slot $slot/PCA: hvers $2\n");
} else {
ProcessHistory("SLOT","keysort","C1","!Slot $slot/PCA: part $part\n");
goto REDUX;
}
next;
}
if (/^\s+MBUS: .*\)\s+(.*)/) {
local($tmp) = "!Slot $slot/MBUS: part $1";
$_ = <INPUT>;
/^\s+HW version (\S+)\s+S\/N (\S+)/ &&
ProcessHistory("SLOT","keysort","MB1","$tmp, serial $2\n") &&
ProcessHistory("SLOT","keysort","MB2","!Slot $slot/MBUS: hvers $1\n");
next;
}
if (/^\s+MBUS Agent Software version (.*)/) {
ProcessHistory("SLOT","keysort","MB3","!Slot $slot/MBUS: software
$1\n");
next;
}
if (/^\s+PLD: (.*)/) {
ProcessHistory("SLOT","keysort","P","!Slot $slot/PLD: $1\n");
next;
}
if (/^\s+MONLIB: (.*)/) {
ProcessHistory("SLOT","keysort","Q","!Slot $slot/MONLIB: $1\n");
next;
}
if (/^\s+ROM Monitor version (.*)/) {
ProcessHistory("SLOT","keysort","R","!Slot $slot/ROM Monitor:
version $1\n");
next;
}
if (/^\s+ROMMON: Version (.*)/) {
ProcessHistory("SLOT","keysort","R","!Slot $slot/ROMMON: version
$1\n");
next;
}
if (/^\s+Fabric Downloader version used (.*)/) {
ProcessHistory("SLOT","keysort","Z","!Slot $slot/Fabric Downloader:
version $1\n");
next;
}
if (/^\s+DRAM size: (\d+)/) {
local($dram) = $1 / 1048576;
$_ = <INPUT>;
if (/^\s+FrFab SDRAM size: (\d+)/) {
ProcessHistory("SLOT","keysort","MB4","!Slot $slot/MBUS: $dram Mbytes
DRAM, "
. $1 / 1024 . " Kbytes SDRAM\n");
} else {
ProcessHistory("SLOT","keysort","MB4","!Slot $slot/MBUS: $dram Mbytes
DRAM\n");
goto REDUX;
}
next;
}
# 7200, 3600, 2600, and 1700 stuff
if (/^(Slot)\s+(\d+(\/\d+)?):/
|| /^\s+(WIC|VIC|WIC\/VIC) Slot (\d):/
|| /^(Encryption AIM) (\d):/) {
if ($1 eq "WIC") {
$WIC = "/$2";
} elsif ($1 eq "VIC") {
$WIC = "/$2";
} elsif ($1 eq "WIC/VIC") {
$WIC = "/$2";
} elsif ($1 eq "DSP") {
$WIC = "/$2";
} elsif ($1 eq "Encryption AIM") {
$slot = "$2";
undef($WIC);
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1\n");
next;
} else {
$slot = $2;
undef($WIC);
}
$_ = <INPUT>; tr/\015//d;
# clean up hideous 7200/etc formats to look more like 7500 output
s/Fast-ethernet on C7200 I\/O card/FE-IO/;
s/ with MII or RJ45/-TX/;
s/Fast-ethernet /100Base/; s/[)(]//g;
s/intermediate reach/IR/i;
ProcessHistory("SLOT","","","!\n");
/\s+(.*) port adapter,?\s+(\d+)\s+/i &&
ProcessHistory("SLOT","keysort","B",
"!Slot $slot: type $1, $2 ports\n") && next;
# I/O controller with no interfaces
/\s+(.*)\s+port adapter\s*$/i &&
ProcessHistory("SLOT","keysort","B",
"!Slot $slot: type $1, 0 ports\n") && next;
/\s+(.*)\s+daughter card(.*)$/ &&
ProcessHistory("SLOT","keysort","B",
"!Slot $slot$WIC: type $1$2\n") && next;
/\s+(FT1)$/ &&
ProcessHistory("SLOT","keysort","B",
"!Slot $slot$WIC: type $1\n") && next;
# AS5300/5400 handling
/^Hardware is\s+(.*)$/i &&
ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1\n")
&& next;
/^DFC type is\s+(.*)$/i &&
ProcessHistory("SLOT","keysort","B","!Slot $slot: type $1\n")
&& next;
#
# handle WICs lacking "daughter card" in the 2nd line of their
# show diag o/p
if (defined($WIC)) {
s/^\s+//;
ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: type $_");
}
next;
} elsif (/^\s+(.* (DSP) Module) Slot (\d):/) {
# The 1760 (at least) has yet another format...where it has two
# dedicated DSP slots, and thus two slot 0s.
my($TYPE) = $1;
$WIC = "/$3";
ProcessHistory("SLOT","","","!\n");
ProcessHistory("SLOT","keysort","B",
"!Slot $slot$WIC: type $TYPE\n");
next;
}
# yet another format. seen on 2600s w/ 12.1, but appears to be all
# 12.1, including 7200s & 3700s. Sometimes the PCB serial appears
# before the hardware revision.
if (/(pcb serial number|hardware revision)\s+:\s+(\S+)$/i) {
my($hw, $pn, $rev, $sn);
if ($1 =~ /^pcb/i) {
$sn = $2;
} else {
$hw = $2;
}
while (<INPUT>) {
tr/\015//d;
# Sometimes "show diag" just ends while we are
# trying to process this pcb stuff. Check for a
# prompt so we can get out.
if (/^$prompt/) {
$found_diag=1;
goto PerlSucks;
}
if (/0x..: / || /^$/) {
# no effing idea why break does not work there
goto PerlSucks;
}
if (/hardware revision\s+:\s+(\S+)/i) { $hw = $1; }
if (/part number\s+:\s+(\S+)/i) { $pn = $1; }
if (/board revision\s+:\s+(\S+)/i) { $rev = $1; }
if (/pcb serial number\s+:\s+(\S+)/i) { $sn = $1; }
# fru/pid bits, true Cisco evolving "standard", hopefully
# "show inventory" will be "the way" soon.
#
if (/product \(fru\) number\s+:\s+(\S+)/i) { $fn = $1; }
if (/product number\s+:\s+(\S+)/i) { $fn = $1; }
if (/product\s+identifier\s+\(PID\)\s+:\s+(\S+)/i) { $fn = $1; }
if (/fru\s+part\s+number\s+(\S+)/i) { $fn = $1; }
}
PerlSucks:
# fru/pid bits
ProcessHistory("SLOT","keysort","AG","!Slot $slot$WIC: fru $fn\n");
#
ProcessHistory("SLOT","keysort","B","!Slot $slot$WIC: hvers $hw rev
$rev\n");
ProcessHistory("SLOT","keysort","C","!Slot $slot$WIC: part $pn,
serial $sn\n");
# If we saw the prompt, then we are done.
last if $found_diag;
}
/revision\s+(\S+).*revision\s+(\S+)/ &&
ProcessHistory("SLOT","keysort","C","!Slot $slot$WIC: hvers $1 rev
$2\n") &&
next;
/number\s+(\S+)\s+Part number\s+(\S+)/ &&
ProcessHistory("SLOT","keysort","D","!Slot $slot$WIC: part $2,
serial $1\n") &&
next;
# AS5x00 bits
/^\ Board Revision\s+(\S+),\s+Serial Number\s+(\S+),/ &&
ProcessHistory("SLOT","keysort","D",
"!Slot $slot$WIC: rev $1, serial $2\n") && next;
/^\ Board Hardware Version\s+(\S+),\s+Item Number\s+(\S+),/ &&
ProcessHistory("SLOT","keysort","D",
"!Slot $slot$WIC: hvers $1, part $2\n") && next;
/^Motherboard Info:/ &&
ProcessHistory("SLOT","keysort","D",
"!Slot $slot$WIC: Motherboard\n") && next;
#
}
ProcessHistory("SLOT","","","!\n");
return(0);
}
# This routine parses "show inventory".
sub ShowInventory {
print STDERR " In ShowInventory: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
return if (/^\s*\^$/);
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^(NAME: "[^"]*",) (DESCR: "[^"]+")/) {
ProcessHistory("INVENTORY","","", sprintf("!%-30s %s\n", $1, $2));
next;
}
# split PID/VID/SN line
if (/^PID: (\S*)\s*,\s*VID: (\S*)\s*,\s*SN: (\S*)\s*$/) {
my($entries) = "";
$entries .= "!PID: $1\n" if ($1);
$entries .= "!VID: $2\n" if ($2);
$entries .= "!SN: $3\n" if ($3);
ProcessHistory("INVENTORY","","", "$entries");
next;
}
ProcessHistory("INVENTORY","","","!$_");
}
ProcessHistory("INVENTORY","","","!\n");
return(0);
}
# This routine parses "show module".
sub ShowModule {
print STDERR " In ShowModule: $_" if ($debug);
my(@lines);
my($slot, $pa);
while (<INPUT>) {
tr/\015//d;
return if (/^\s*\^$/);
last if (/online diag status/i);
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
# match slot/card info line
if (/^ *(\d+)\s+(\d+)\s+(.*)\s+(\S+)\s+(\S+)\s*$/) {
$lines[$1 * 1000] .= "!Slot $1: type $3, $2 ports\n!Slot $1: part
$4, serial $5\n";
$lines[$1 * 1000] =~ s/\s+,/,/g;
next;
}
# now match the Revs in the second paragraph of o/p and stick it in
# the array with the previous bits...grumble.
if (/^ *(\d+)\s+\S+\s+to\s+\S+\s+(\S+)\s+(\S*)\s+(\S+)(\s+\S+)?\s*$/) {
$lines[$1 * 1000] .= "!Slot $1: hvers $2, firmware $3, sw $4\n";
$lines[$1 * 1000] =~ s/\s+,/,/g;
next;
}
# grab the sub-modules, if any
if (/^\s+(\d+)\s(.*)\s+(\S+)\s+(\S+)\s+(\S+)\s+\S+\s*$/) {
my($idx);
$pa = 0 if ($1 != $slot);
$slot = $1;
$idx = $1 * 1000 + $1 * 10 + $pa;
$lines[$idx] .= "!Slot $1/$pa: type $2\n";
$lines[$idx] .= "!Slot $slot/$pa: part $3, serial $4\n";
$lines[$idx] .= "!Slot $slot/$pa: hvers $5\n";
$pa++;
}
}
foreach $slot (@lines) {
next if ($slot =~ /^\s*$/);
ProcessHistory("Module","","","$slot!\n");
}
return(0);
}
# This routine parses "show spe version".
sub ShowSpeVersion {
print STDERR " In ShowSpeVersion: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(-1) if (/command authorization failed/i);
ProcessHistory("MODEM","","","!Modem: $_") && next;
}
ProcessHistory("MODEM","","","!\n");
return(0);
}
# This routine parses "show c7200" for the 7200
# This will create arrays for hw info.
sub ShowC7200 {
# Skip if this is not a 7200.
print STDERR " In ShowC7200: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
#return(1) if ($type !~ /^72/);
return(-1) if (/command authorization failed/i);
/^$/ && next;
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^(C7200 )?Midplane EEPROM:/) {
$_ = <INPUT>;
/revision\s+(\S+).*revision\s+(\S+)/;
ProcessHistory("SLOT","","","!Slot Midplane: hvers $1 rev $2\n");
$_ = <INPUT>;
/number\s+(\S+)\s+Part number\s+(\S+)/;
ProcessHistory("SLOT","","","!Slot Midplane: part $2, serial $1\n!\n");
next;
}
if (/C720\d(VXR)? CPU EEPROM:/) {
my ($hvers,$rev,$part,$serial);
# npe400s report their cpu eeprom info differently w/ 12.0.21S
while (<INPUT>) {
/Hardware Revision\s+: (\S+)/ && ($hvers = $1) && next;
/Board Revision\s+: (\S+)/ && ($rev = $1) && next;
/Part Number\s+: (\S+)/ && ($part = $1) && next;
/Serial Number\s+: (\S+)/ && ($serial = $1) && next;
/revision\s+(\S+).*revision\s+(\S+)/ &&
($hvers = $1, $rev = $2) && next;
/number\s+(\S+)\s+Part number\s+(\S+)/ &&
($serial = $1, $part = $2) && next;
/^\s*$/ && last;
}
ProcessHistory("SLOT","","","!Slot CPU: hvers $hvers rev $rev\n");
ProcessHistory("SLOT","","","!Slot CPU: part $part, serial
$serial\n!\n");
next;
}
}
return(0);
}
# This routine parses "show vtp status"
sub ShowVTP {
print STDERR " In ShowVTP: $_" if ($debug);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
#return(1) if ($type !~ /^(2900XL|3500XL|6000)$/);
return(-1) if (/command authorization failed/i);
next if (/^Configuration last modified by/);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
if (/^VTP Operating Mode\s+:\s+(Transparent|Server)/) {
$DO_SHOW_VLAN = 1;
}
ProcessHistory("COMMENTS","keysort","I0","!VTP: $_");
}
ProcessHistory("COMMENTS","keysort","I0","!\n");
return(0);
}
# This routine parses "show vlan"
sub ShowVLAN {
print STDERR " In ShowVLAN: $_" if ($debug);
($_ = <INPUT>, return(1)) if (!$DO_SHOW_VLAN);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
next if (/^(\s*|\s*$cmd\s*)$/);
return(1) if /^\s*\^\s*$/;
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(1) if (/Ambiguous command/i);
return(-1) if (/command authorization failed/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
ProcessHistory("COMMENTS","keysort","IO","!VLAN: $_");
}
ProcessHistory("COMMENTS","keysort","IO","!\n");
return(0);
}
# This routine processes a "write term"
sub WriteTerm {
print STDERR " In WriteTerm: $_" if ($debug);
my($lineauto,$comment,$linecnt) = (0,0,0);
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
return(1) if (!$linecnt && /^\s+\^\s*$/);
next if (/^\s*$cmd\s*$/);
return(1) if (/Line has invalid autocommand /);
return(1) if (/(Invalid (input|command) detected|Type help or )/i);
return(1) if (/\%Error: No such file or directory/);
return(1) if (/(Open device \S+ failed|Error opening \S+:)/);
return(0) if ($found_end); # Only do this routine once
return(-1) if (/command authorization failed/i);
return(-1) if (/% ?configuration buffer full/i);
# the pager can not be disabled per-session on the PIX
if (/^(<-+ More -+>)/) {
my($len) = length($1);
s/^$1\s{$len}//;
}
/^! no configuration change since last restart/i && next;
# skip emtpy lines at the beginning
if (!$linecnt && /^\s*$/) {
next;
}
if (!$linecnt && defined($config_register)) {
ProcessHistory("","","", "!\nconfig-register $config_register\n");
}
/Non-Volatile memory is in use/ && return(-1); # NvRAM is locked
/% Configuration buffer full, / && return(-1); # buffer is in use
$linecnt++;
$lineauto = 0 if (/^[^ ]/);
# skip the crap
if (/^(##+|(building|current) configuration)/i) {
while (<INPUT>) {
next if (/^Current configuration\s*:/i);
next if (/^:/);
next if (/^([%!].*|\s*)$/);
next if (/^ip add.*ipv4:/); # band-aid for 3620 12.0S
last;
}
tr/\015//d;
}
# skip ASA 5520 configuration author line
/^: written by /i && next;
# some versions have other crap mixed in with the bits in the
# block above
/^! (Last configuration|NVRAM config last)/ && next;
# and for the ASA
/^: (Written by \S+ at|Saved)/ && next;
# skip consecutive comment lines to avoid oscillating extra comment
# line on some access servers. grrr.
if (/^!\s*$/) {
next if ($comment);
ProcessHistory("","","",$_);
$comment++;
next;
}
$comment = 0;
# Dog gone Cool matches to process the rest of the config
/^tftp-server flash / && next; # kill any tftp remains
/^ntp clock-period / && next; # kill ntp clock-period
/^ length / && next; # kill length on serial lines
/^ width / && next; # kill width on serial lines
$lineauto = 1 if /^ modem auto/;
/^ speed / && $lineauto && next; # kill speed on serial lines
/^ clockrate / && next; # kill clockrate on serial interfaces
if (/^(enable )?(password|passwd)( level \d+)? / && $filter_pwds >= 1) {
ProcessHistory("ENABLE","","","!$1$2$3 <removed>\n");
next;
}
if (/^(enable secret) / && $filter_pwds >= 2) {
ProcessHistory("ENABLE","","","!$1 <removed>\n");
next;
}
if (/^username (\S+)(\s.*)? secret /) {
if ($filter_pwds >= 2) {
ProcessHistory("USER","keysort","$1",
"!username $1$2 secret <removed>\n");
} else {
ProcessHistory("USER","keysort","$1","$_");
}
next;
}
if (/^username (\S+)(\s.*)? password ((\d) \S+|\S+)/) {
if ($filter_pwds >= 2) {
ProcessHistory("USER","keysort","$1",
"!username $1$2 password <removed>\n");
} elsif ($filter_pwds >= 1 && $4 ne "5"){
ProcessHistory("USER","keysort","$1",
"!username $1$2 password <removed>\n");
} else {
ProcessHistory("USER","keysort","$1","$_");
}
next;
}
# cisco AP w/ IOS
if (/^(wlccp \S+ username (\S+)(\s.*)? password) (\d \S+|\S+)/) {
if ($filter_pwds >= 1) {
ProcessHistory("USER","keysort","$2","!$1 <removed>\n");
} else {
ProcessHistory("USER","keysort","$2","$_");
}
next;
}
# filter auto "rogue ap" configuration lines
/^rogue ap classify / && next;
if (/^( set session-key (in|out)bound ah \d+ )/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1<removed>\n");
next;
}
if (/^( set session-key (in|out)bound esp \d+ (authenticator|cypher) )/
&& $filter_pwds >= 1) {
ProcessHistory("","","","!$1<removed>\n");
next;
}
if (/^(\s*)password / && $filter_pwds >= 1) {
ProcessHistory("LINE-PASS","","","!$1password <removed>\n");
next;
}
if (/^(\s*)secret / && $filter_pwds >= 2) {
ProcessHistory("LINE-PASS","","","!$1secret <removed>\n");
next;
}
if (/^\s*neighbor (\S*) password / && $filter_pwds >= 1) {
ProcessHistory("","","","! neighbor $1 password <removed>\n");
next;
}
if (/^(ppp .* password) 7 .*/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
if (/^(ip ftp password) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
if (/^( ip ospf authentication-key) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
# isis passwords appear to be completely plain-text
if (/^\s+isis password (\S+)( .*)?/ && $filter_pwds >= 1) {
ProcessHistory("","","","!isis password <removed>$2\n"); next;
}
if (/^\s+(domain-password|area-password) (\S+)( .*)?/
&& $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>$3\n"); next;
}
# this is reversable, despite 'md5' in the cmd
if (/^( ip ospf message-digest-key \d+ md5) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
# this is also reversable, despite 'md5 encrypted' in the cmd
if (/^( message-digest-key \d+ md5 (7|encrypted)) /
&& $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
if (/^((crypto )?isakmp key) \S+ / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed> $'"); next;
}
# filter HSRP passwords
if (/^(\s+standby \d+ authentication) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
# this appears in "measurement/sla" images
if (/^(\s+key-string \d?)/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
if (/^( l2tp tunnel \S+ password)/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
# i am told these are plain-text on the PIX
if (/^(vpdn username (\S+) password)/) {
if ($filter_pwds >= 1) {
ProcessHistory("USER","keysort","$2","!$1 <removed>\n");
} else {
ProcessHistory("USER","keysort","$2","$_");
}
next;
}
# ASA/PIX keys in more system:running-config
if (/^( pre-shared-key | key |failover key ).*/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed> $'"); next;
}
if (/(\s+ldap-login-password )\S+(.*)/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed> $'"); next;
}
#
if (/^( cable shared-secret )/ && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n");
next;
}
/fair-queue individual-limit/ && next;
# sort ip explicit-paths.
if (/^ip explicit-path name (\S+)/) {
my($key) = $1;
my($expath) = $_;
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/);
last if (/^$prompt/ || ! /^(ip explicit-path name |[ !])/);
if (/^ip explicit-path name (\S+)/) {
ProcessHistory("EXPATH","keysort","$key","$expath");
$key = $1;
$expath = $_;
} else {
$expath .= $_;
}
}
ProcessHistory("EXPATH","keysort","$key","$expath");
}
# sort route-maps
if (/^route-map (\S+)/) {
my($key) = $1;
my($routemap) = $_;
while (<INPUT>) {
tr/\015//d;
last if (/^$prompt/ || ! /^(route-map |[ !])/);
if (/^route-map (\S+)/) {
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
$key = $1;
$routemap = $_;
} else {
$routemap .= $_;
}
}
ProcessHistory("ROUTEMAP","keysort","$key","$routemap");
}
# filter out any RCS/CVS tags to avoid confusing local CVS storage
s/\$(Revision|Id):/ $1:/;
# order access-lists
/^access-list\s+(\d\d?)\s+(\S+)\s+(\S+)/ &&
ProcessHistory("ACL $1 $2","$aclsort","$3","$_") && next;
# order extended access-lists
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+host\s+(\S+)/ &&
ProcessHistory("EACL $1 $2","$aclsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+(\d\S+)/ &&
ProcessHistory("EACL $1 $2","$aclsort","$3","$_") && next;
/^access-list\s+(\d\d\d)\s+(\S+)\s+ip\s+any/ &&
ProcessHistory("EACL $1 $2","$aclsort","0.0.0.0","$_") && next;
# order arp lists
/^arp\s+(\d+\.\d+\.\d+\.\d+)\s+/ &&
ProcessHistory("ARP","$aclsort","$1","$_") && next;
/^ip(v6)? prefix-list\s+(\S+)\s+seq\s+(\d+)\s+(permit|deny)\s+(\S+)(\/.*)$/
&& ProcessHistory("PACL $2 $4","$aclsort","$5",
"ip$1 prefix-list $2 $4 $5$6\n")
&& next;
# order logging statements
/^logging (\d+\.\d+\.\d+\.\d+)/ &&
ProcessHistory("LOGGING","ipsort","$1","$_") && next;
# order/prune snmp-server host statements
# we only prune lines of the form
# snmp-server host a.b.c.d <community>
if (/^snmp-server host (\d+\.\d+\.\d+\.\d+) /) {
if ($filter_commstr) {
my($ip) = $1;
my($line) = "snmp-server host $ip";
my(@tokens) = split(' ', $');
my($token);
while ($token = shift(@tokens)) {
if ($token eq 'version') {
$line .= " " . join(' ', ($token, shift(@tokens)));
if ($token eq '3') {
$line .= " " . join(' ', ($token, shift(@tokens)));
}
} elsif ($token eq 'vrf') {
$line .= " " . join(' ', ($token, shift(@tokens)));
} elsif ($token =~ /^(informs?|traps?|(no)?auth)$/) {
$line .= " " . $token;
} else {
$line = "!$line " . join(' ', ("<removed>",
join(' ', at tokens)));
last;
}
}
ProcessHistory("SNMPSERVERHOST","ipsort","$ip","$line\n");
} else {
ProcessHistory("SNMPSERVERHOST","ipsort","$1","$_");
}
next;
}
if (/^(snmp-server community) (\S+)/) {
if ($filter_commstr) {
ProcessHistory("SNMPSERVERCOMM","keysort","$_",
"!$1 <removed>$'") && next;
} else {
ProcessHistory("SNMPSERVERCOMM","keysort","$_","$_") && next;
}
}
# prune tacacs/radius server keys
if (/^((tacacs|radius)-server\s(\w*[-\s(\s\S+])*\s?key) (\d )?\w+/
&& $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>$'"); next;
}
# order clns host statements
/^clns host \S+ (\S+)/ &&
ProcessHistory("CLNS","keysort","$1","$_") && next;
# order alias statements
/^alias / && ProcessHistory("ALIAS","keysort","$_","$_") && next;
# delete ntp auth password - this md5 is a reversable too
if (/^(ntp authentication-key \d+ md5) / && $filter_pwds >= 1) {
ProcessHistory("","","","!$1 <removed>\n"); next;
}
# order ntp peers/servers
if (/^ntp (server|peer) (\d+)\.(\d+)\.(\d+)\.(\d+)/) {
$sortkey = sprintf("$1 %03d%03d%03d%03d",$2,$3,$4,$5);
ProcessHistory("NTP","keysort",$sortkey,"$_");
next;
}
# order ip host statements
/^ip host (\S+) / &&
ProcessHistory("IPHOST","keysort","$1","$_") && next;
# order ip nat source static statements
/^ip nat (\S+) source static (\S+)/ &&
ProcessHistory("IP NAT $1","ipsort","$2","$_") && next;
# order atm map-list statements
/^\s+ip\s+(\d+\.\d+\.\d+\.\d+)\s+atm-vc/ &&
ProcessHistory("ATM map-list","ipsort","$1","$_") && next;
# order ip rcmd lines
/^ip rcmd/ && ProcessHistory("RCMD","keysort","$_","$_") && next;
# system controller
/^syscon address (\S*) (\S*)/ &&
ProcessHistory("","","","!syscon address $1 <removed>\n") &&
next;
if (/^syscon password (\S*)/ && $filter_pwds >= 1) {
ProcessHistory("","","","!syscon password <removed>\n");
next;
}
/^ *Cryptochecksum:/ && next;
# catch anything that wasnt matched above.
ProcessHistory("","","","$_");
# end of config. the ": " game is for the PIX
#if (/^(: +)?end$/) {
if (/^end$/) {
$found_end = 1;
return(0);
}
}
# The ContentEngine lacks a definitive "end of config" marker. If we
# know that it is a CE, SAN, or NXOS and we have seen at least 5 lines
# of write term output, we can be reasonably sure that we got the
config.
if (($type == "CE" || $type == "SAN" || $type == "NXOS" ) &&
$linecnt > 5) {
$found_end = 1;
return(0);
}
return(0);
}
# dummy function
sub DoNothing {print STDOUT;}
# Main
@commandtable = (
{'show version' => 'ShowVersion'},
{'show vlan' => 'ShowVLAN'},
{'show running-config' => 'WriteTerm'},
);
# Use an array to preserve the order of the commands and a hash for mapping
# commands to the subroutine and track commands that have been completed.
@commands = map(keys(%$_), @commandtable);
%commands = map(%$_, @commandtable);
$cisco_cmds = join(";", at commands);
$cmds_regexp = join("|", map quotemeta($_), @commands);
if (length($host) == 0) {
if ($file) {
print(STDERR "Too few arguments: file name required\n");
exit(1);
} else {
print(STDERR "Too few arguments: host name required\n");
exit(1);
}
}
open(OUTPUT,">$host.new") || die "Can't open $host.new for writing: $!\n";
select(OUTPUT);
# make OUTPUT unbuffered if debugging
if ($debug) { $| = 1; }
if ($file) {
print STDERR "opening file $host\n" if ($debug);
print STDOUT "opening file $host\n" if ($log);
open(INPUT,"<$host") || die "open failed for $host: $!\n";
} else {
print STDERR "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n"
if ($debug);
print STDOUT "executing clogin -t $timeo -c\"$cisco_cmds\" $host\n"
if ($log);
if (defined($ENV{NOPIPE})) {
system "clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null >
$host.raw 2>&1" || die "clogin failed for $host: $!\n";
open(INPUT, "< $host.raw") || die "clogin failed for $host: $!\n";
} else {
open(INPUT,"clogin -t $timeo -c \"$cisco_cmds\" $host </dev/null |") ||
die "clogin failed for $host: $!\n";
}
}
# determine ACL sorting mode
if ($ENV{"ACLSORT"} =~ /no/i) {
$aclsort = "";
}
# determine community string filtering mode
if (defined($ENV{"NOCOMMSTR"}) &&
($ENV{"NOCOMMSTR"} =~ /yes/i || $ENV{"NOCOMMSTR"} =~ /^$/)) {
$filter_commstr = 1;
} else {
$filter_commstr = 0;
}
# determine password filtering mode
if ($ENV{"FILTER_PWDS"} =~ /no/i) {
$filter_pwds = 0;
} elsif ($ENV{"FILTER_PWDS"} =~ /all/i) {
$filter_pwds = 2;
} else {
$filter_pwds = 1;
}
#ProcessHistory("","","","!RANCID-CONTENT-TYPE: cisco\n!\n");
ProcessHistory("","","","!RANCID-CONTENT-TYPE: ibmbnt\n!\n");
ProcessHistory("COMMENTS","keysort","B0","!\n");
ProcessHistory("COMMENTS","keysort","D0","!\n");
ProcessHistory("COMMENTS","keysort","F0","!\n");
ProcessHistory("COMMENTS","keysort","G0","!\n");
TOP: while(<INPUT>) {
tr/\015//d;
if (/[>#]\s?exit/) {
$clean_run = 1;
last;
}
if (/^Error:/) {
print STDOUT ("$host clogin error: $_");
print STDERR ("$host clogin error: $_") if ($debug);
$clean_run = 0;
last;
}
while (/[>#]\s*($cmds_regexp)\s*$/) {
$cmd = $1;
if (!defined($prompt)) {
$prompt = ($_ =~ /^([^#>]+[#>])/)[0];
$prompt =~ s/([][}{)(\\])/\\$1/g;
print STDERR ("PROMPT MATCH: $prompt\n") if ($debug);
}
print STDERR ("HIT COMMAND:$_") if ($debug);
if (! defined($commands{$cmd})) {
print STDERR "$host: found unexpected command - \"$cmd\"\n";
$clean_run = 0;
last TOP;
}
$rval = &{$commands{$cmd}};
delete($commands{$cmd});
if ($rval == -1) {
$clean_run = 0;
last TOP;
}
}
}
print STDOUT "Done $logincmd: $_\n" if ($log);
# Flush History
ProcessHistory("","","","");
# Cleanup
close(INPUT);
close(OUTPUT);
if (defined($ENV{NOPIPE})) {
unlink("$host.raw") if (! $debug);
}
# check for completeness
if (scalar(%commands) || !$clean_run || !$found_end) {
if (scalar(%commands)) {
printf(STDOUT "$host: missed cmd(s): %s\n", join(',', keys(%commands)));
printf(STDERR "$host: missed cmd(s): %s\n", join(',', keys(%commands)))
if ($debug);
}
if (!$clean_run || !$found_end) {
print STDOUT "$host: End of run not found\n";
print STDERR "$host: End of run not found\n" if ($debug);
system("/usr/bin/tail -1 $host.new");
}
unlink "$host.new" if (! $debug);
}
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bntrancid.tar.gz
Type: application/x-gzip
Size: 15144 bytes
Desc: bntrancid.tar.gz
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20120418/1bdbb231/attachment.bin>
More information about the Rancid-discuss
mailing list