[rancid] .cloginrc - problem with password

[Paolo De Michele]

my .cloginrc:

add user 10.0.0.3 xxxxxxxxxx
add password 10.0.0.3 {P-------l----3--------@} {L------x-x-0----l-------}

output from console:

administrator at 10.0.0.6's password:
Permission denied, please try again.

Error: Check your passwd for 10.0.0.6


excuse me, but I don't understand where I'm wrong
are inexperienced and if I don't go out in this point are completely
blocked. Thanks again

On 01/23/2012 08:56 PM, Gareth Hopkins wrote:
> Hi, 
>
> userpassword is only used if the password is different to the password
> set by the add password option. 
>
> so change "add userpassword" to "add password"
>
> Cheers, 
>
> Gareth 
>  
> On 23 Jan 2012, at 9:45 PM, Paolo De Michele wrote:
>
>>
>>
>> On 01/23/2012 08:31 PM, Gareth Hopkins wrote:
>>> Hi,
>>
>> hi Gareth,
>>>
>>> Try just with add password. 
>>>
>>>> add password 10.0.0.3
>>>> {P-------l----3--------@} {L------x-x-0----l-------}
>>>
>>> As per the clogin sample file 
>>>
>>> <snip>
>>>
>>> # add userpassword <router name glob> <user password>
>>> #       The password for user if different than the password set
>>> #       using 'add password'.
>>
>> now it's correctly?
>>
>> add *userpassword* 10.0.0.3
>> {P-------l----3--------@} {L------x-x-0----l-------}
>>
>>>
>>> </snip>
>>>
>>> Cheers, 
>>>
>>> Gareth 
>>>
>>> On 23 Jan 2012, at 8:18 PM, Paolo De Michele wrote:
>>>
>>>> hi list,
>>>> I have problems to authenticate my cisco router with passwordi to
>>>> enable.
>>>>
>>>> the scenario is as follows:
>>>>     - authentication password has special characters, uppercase
>>>> letters, lowercase letters and numbers
>>>>     - enable password has capital letters, lowercase letters and
>>>> numbers
>>>>
>>>> my .cloginrc is:
>>>>
>>>> add method {ssh}
>>>> add user 10.0.0.3 username
>>>> add userpassword 10.0.0.3 {P-------l----3--------@}
>>>> add enauser 10.0.0.3 {L------x-x-0----l-------}
>>>>
>>>> I also tried:
>>>>
>>>>
>>>> add method {ssh}
>>>> add user 10.0.0.3 username
>>>> add userpassword 10.0.0.3 {P-------l----3--------@}
>>>> {L------x-x-0----l-------}
>>>>
>>>>
>>>>
>>>> the problem is that I am logging to the router but not in enable.
>>>> something wrong in the syntax of the file. cloginrc?
>>>> I look forward to your help
>>>> thanks in advance
>>>> _______________________________________________
>>>> Rancid-discuss mailing list
>>>> Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20120123/da8b3c88/attachment.html>