[rancid] .cloginrc - problem with password

[Paolo De Michele]

my .cloginrc:

add user 10.0.0.3 xxxxxxxxxx
add password 10.0.0.3 {P-------l----3--------@} {L------x-x-0----l-------}

from console:

xxxxxxxxxx at 10.0.0.3's password:
Permission denied, please try again.

Error: Check your passwd for 10.0.0.3

why?




On 01/23/2012 10:16 PM, Paolo De Michele wrote:
> have the same password of all routers
> It is not a problem of global settings
>
> On 01/23/2012 09:04 PM, Gareth Hopkins wrote:
>> Do you perhaps have a global setting somewhere else in your clogin
>> file as you only have an entry for 10.0.0.3
>> and not 10.0.0.6 which you are getting the error from. 
>>
>> Cheers, 
>>
>> Gareth 
>>
>> On 23 Jan 2012, at 10:02 PM, Paolo De Michele wrote:
>>
>>> my .cloginrc:
>>>
>>> add user 10.0.0.3 xxxxxxxxxx
>>> add password 10.0.0.3
>>> {P-------l----3--------@} {L------x-x-0----l-------}
>>>
>>> output from console:
>>>
>>> administrator at 10.0.0.6's password:
>>> Permission denied, please try again.
>>>
>>> Error: Check your passwd for 10.0.0.6
>>>
>>>
>>> excuse me, but I don't understand where I'm wrong
>>> are inexperienced and if I don't go out in this point are completely
>>> blocked. Thanks again
>>>
>>> On 01/23/2012 08:56 PM, Gareth Hopkins wrote:
>>>> Hi, 
>>>>
>>>> userpassword is only used if the password is different to the
>>>> password set by the add password option. 
>>>>
>>>> so change "add userpassword" to "add password"
>>>>
>>>> Cheers, 
>>>>
>>>> Gareth 
>>>>  
>>>> On 23 Jan 2012, at 9:45 PM, Paolo De Michele wrote:
>>>>
>>>>>
>>>>>
>>>>> On 01/23/2012 08:31 PM, Gareth Hopkins wrote:
>>>>>> Hi,
>>>>>
>>>>> hi Gareth,
>>>>>>
>>>>>> Try just with add password. 
>>>>>>
>>>>>>> add password 10.0.0.3
>>>>>>> {P-------l----3--------@} {L------x-x-0----l-------}
>>>>>>
>>>>>> As per the clogin sample file 
>>>>>>
>>>>>> <snip>
>>>>>>
>>>>>> # add userpassword <router name glob> <user password>
>>>>>> #       The password for user if different than the password set
>>>>>> #       using 'add password'.
>>>>>
>>>>> now it's correctly?
>>>>>
>>>>> add *userpassword* 10.0.0.3
>>>>> {P-------l----3--------@} {L------x-x-0----l-------}
>>>>>
>>>>>>
>>>>>> </snip>
>>>>>>
>>>>>> Cheers, 
>>>>>>
>>>>>> Gareth 
>>>>>>
>>>>>> On 23 Jan 2012, at 8:18 PM, Paolo De Michele wrote:
>>>>>>
>>>>>>> hi list,
>>>>>>> I have problems to authenticate my cisco router with passwordi
>>>>>>> to enable.
>>>>>>>
>>>>>>> the scenario is as follows:
>>>>>>>     - authentication password has special characters, uppercase
>>>>>>> letters, lowercase letters and numbers
>>>>>>>     - enable password has capital letters, lowercase letters and
>>>>>>> numbers
>>>>>>>
>>>>>>> my .cloginrc is:
>>>>>>>
>>>>>>> add method {ssh}
>>>>>>> add user 10.0.0.3 username
>>>>>>> add userpassword 10.0.0.3 {P-------l----3--------@}
>>>>>>> add enauser 10.0.0.3 {L------x-x-0----l-------}
>>>>>>>
>>>>>>> I also tried:
>>>>>>>
>>>>>>>
>>>>>>> add method {ssh}
>>>>>>> add user 10.0.0.3 username
>>>>>>> add userpassword 10.0.0.3 {P-------l----3--------@}
>>>>>>> {L------x-x-0----l-------}
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> the problem is that I am logging to the router but not in
>>>>>>> enable. something wrong in the syntax of the file. cloginrc?
>>>>>>> I look forward to your help
>>>>>>> thanks in advance
>>>>>>> _______________________________________________
>>>>>>> Rancid-discuss mailing list
>>>>>>> Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
>>>>>>> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>>>>>>
>>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20120123/4f94bf95/attachment.html>