[rancid] F10 - S50 and rancid 2.3.6

Matthew Arguin matt.arguin at currensee.com
Wed Jul 25 16:25:28 UTC 2012


ok....i am running the latest FTOS...and running f10rancid in debug 
seems to look pretty good...

[rancid at s6xen1 ~]$ bin/f10rancid -d 192.168.C.D
executing clogin -t 90 -c"show version;show bootvar;dir flash:;dir 
slot0:;show chassis;show system;show inventory;show vlan;show running" 
192.168.C.D
PROMPT MATCH: csw3-1#
HIT COMMAND:csw3-1#show version
     In ShowVersion: csw3-1#show version
HIT COMMAND:csw3-1#show bootvar
     In ShowBoot: csw3-1#show bootvar
HIT COMMAND:csw3-1#dir flash:
     In DirSlotN: csw3-1#dir flash:
HIT COMMAND:csw3-1#dir slot0:
     In DirSlotN: csw3-1#dir slot0:
HIT COMMAND:csw3-1#show chassis
     In ShowChassis: csw3-1#show chassis
HIT COMMAND:csw3-1#show system
     In ShowChassis: csw3-1#show system
HIT COMMAND:csw3-1#show inventory
     In ShowInventory: csw3-1#show inventory
HIT COMMAND:csw3-1#show vlan
     In ShowVLAN: csw3-1#show vlan
HIT COMMAND:csw3-1#show running
     In WriteTerm: csw3-1#show running


and it writes a nice new file with the results 192.168.C.D.new in the 
dir i ran it from, but does not seem to put it in to the repository... i 
have not used Rancid for anything other than just cisco devices before 
and have not need to run anything other than the rancid-run, so forgive 
my ignorance on this one.

also, using f10rancid, do i still put the entry in the router.db file 
that my other network stuff is in? Do i schedule a cronjob to run the 
f10rancid script, or when i have everything correct should the 
rancid-run call this?

thanks in advance,

matt




On 7/24/2012 2:37 PM, Brian Talley wrote:
> What model of switch and, more importantly, is it FTOS or SFTOS?  FTOS 
> will work w/ RANCID out of the box using f10rancid, but SFTOS will 
> not.  (IME, anyway.)
>
> On Tue, Jul 24, 2012 at 10:06 AM, Matthew Arguin 
> <matt.arguin at currensee.com <mailto:matt.arguin at currensee.com>> wrote:
>
>     Hello all,
>       i have been trying to get my Force10 switch in to my rancid
>     repository, i configured it as a Forec10 (docuementation says
>     Force 10 router, but i was hoping that the switch would work as
>     well). but nothing seems to be working.  I confirmed that rancid
>     is working by making a minor change to one of my C3650's and
>     verifying the change in the repo after forcing a run.  nothing is
>     showing for my F10.  I tested the login bin/clogin <ip add> and
>     that was successful. executing the run against just the one host
>      with -x and checking the logs does not yeild much either:
>
>     $ cat networking.20120724.112705
>     ++ date
>     + echo starting: Tue Jul 24 11:27:05 EDT 2012
>     starting: Tue Jul 24 11:27:05 EDT 2012
>     + echo
>
>     + '[' -f /tmp/.networking.run.lock ']'
>     + trap 'rm -fr $LOCKFILE;exit 1' 1 2 3 6 10 15
>     + touch /tmp/.networking.run.lock
>     + '[' 0 -eq 0 ']'
>     + control_rancid -r 192.168.20.243 networking
>
>     + rm -f /tmp/.networking.run.lock
>     + trap '' 1 2 3 6 10 15
>     + echo
>
>     ++ date
>     + echo ending: Tue Jul 24 11:27:05 EDT 2012
>     ending: Tue Jul 24 11:27:05 EDT 2012
>
>
>     should rancid work with force10 as the type for a switch or do i
>     have to do it as an unsupported type?  i am running rancid 2.3.6
>
>     -- 
>     Matthew Arguin
>     Currensee, Inc.
>     54 Canal St, 4th Floor
>     Boston, MA 02114
>     (617) 986-4758 <tel:%28617%29%20986-4758> (Office)
>     _________________________________________________________________________
>     This email and any files transmitted with it are confidential and
>     intended solely for the addressee.  If you received this email in
>     error, please do not disclose the contents to anyone; kindly
>     notify the sender by return email and delete this email and any
>     attachments from your system.
>
>     © 2011 Currensee Inc. is a member of the National Futures
>     Association (NFA) Member ID 0403251 | Over the counter retail
>     foreign currency (Forex) trading may involve significant risk of
>     loss. It is not suitable for all investors and you should make
>     sure you understand the risks involved before trading and seek
>     independent advice if necessary. Performance, strategies and
>     charts shown are not necessarily predictive of any particular
>     result and past performance is no indication of future results.
>     Investor returns may vary from Trade Leader returns based on
>     slippage, fees, broker spreads, volatility or other market conditions.
>
>     Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 |
>     +1.617.624.3824 <tel:%2B1.617.624.3824>
>
>     _______________________________________________
>     Rancid-discuss mailing list
>     Rancid-discuss at shrubbery.net <mailto:Rancid-discuss at shrubbery.net>
>     http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
>
>
>
> -- 
> Brian Talley
>

-- 
Matthew Arguin
Currensee, Inc.
54 Canal St, 4th Floor
Boston, MA 02114
(617) 986-4758 (Office)
_________________________________________________________________________
This email and any files transmitted with it are confidential and intended solely for the addressee.  If you received this email in error, please do not disclose the contents to anyone; kindly notify the sender by return email and delete this email and any attachments from your system.

© 2011 Currensee Inc. is a member of the National Futures Association (NFA) Member ID 0403251 | Over the counter retail foreign currency (Forex) trading may involve significant risk of loss. It is not suitable for all investors and you should make sure you understand the risks involved before trading and seek independent advice if necessary. Performance, strategies and charts shown are not necessarily predictive of any particular result and past performance is no indication of future results. Investor returns may vary from Trade Leader returns based on slippage, fees, broker spreads, volatility or other market conditions.

Currensee Inc | 54 Canal St 4th Floor | Boston, MA 02114 | +1.617.624.3824

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20120725/7b5eee6b/attachment.html>


More information about the Rancid-discuss mailing list