[rancid] Rancid enable problem

[michael schnatterer]

Hy,
Here is my Output:

rancid at srv01: /home/rancid/bin/clogin -c show version "hostname"

version
spawn ssh -c 3des -x -l rancid version
ssh: Could not resolve hostname version: Name or service not known

Error: Couldn't login: version
"hostname"
spawn ssh -c 3des -x -l "User" "hostname"
"user"@"hostnames" password:
#######ASA Firewall ########
ASA-FW>
ASA-FW> termin terminal length 0
          ^
ERROR: % Invalid input detected at '^' marker.
ERROR: Command authorization failed
ASA-FW>show
INFO: % Type "show ?" for a list of
 subcommands
ASA-FW> exit


________________________________
 Von: Ryan West <rwest at zyedge.com>
An: michael schnatterer <michael6at at yahoo.de> 
CC: Adam Korab <adam.korab at gmail.com>; "rancid-discuss at shrubbery.net" <rancid-discuss at shrubbery.net> 
Gesendet: 17:42 Dienstag, 29.Mai 2012
Betreff: RE: [rancid] Rancid enable problem
 

 
The autoenable should be set to 0 for your config.
 
-ryan
 
From:michael schnatterer [mailto:michael6at at yahoo.de] 
Sent: Tuesday, May 29, 2012 10:39 AM
To: Ryan West
Cc: Adam Korab; rancid-discuss at shrubbery.net
Subject: Re: [rancid] Rancid enable problem
 
.cloginrc
 
add user user1 {password}
add user * {rancid}

#Firewall
add password 193.186.1.2 {userpassword} {enablepassword} 
add autoenable 193.186.1.2 1 or 0

add method * {ssh} {telnet}


Thats it, how i said in my further post on every asa firewall work this config
Best regards and thanks
 

________________________________
 
Von:Ryan West <rwest at zyedge.com>
An: michael schnatterer <michael6at at yahoo.de> 
CC: Adam Korab <adam.korab at gmail.com>; "rancid-discuss at shrubbery.net" <rancid-discuss at shrubbery.net> 
Gesendet: 14:49 Dienstag, 29.Mai 2012
Betreff: Re: [rancid] Rancid enable problem
 
Paste a sanitized version of your .cloginrc file. 

Sent from handheld 

On May 29, 2012, at 8:46 AM, "michael schnatterer" <michael6at at yahoo.de> wrote:
In this case i have an other username as RANCID, but this username is entered in the cloginrc too.
> 
>add user 193.186.1.2 {User}
>I login with the User and a password, after that i write enable and enter an other password as the first one.
> 
>Thanks
> 
>
>________________________________
> 
>Von:Ryan West <rwest at zyedge.com>
>An: michael schnatterer <michael6at at yahoo.de>; Adam Korab <adam.korab at gmail.com> 
>CC: "rancid-discuss at shrubbery.net" <rancid-discuss at shrubbery.net> 
>Gesendet: 13:56 Dienstag, 29.Mai 2012
>Betreff: RE: [rancid] Rancid enable problem
>
>On Tue, May 29, 2012 at 02:47:51, michael schnatterer wrote:
>> Subject: Re: [rancid] Rancid enable problem
>> 
>> Hy Guy's
>> 
>> Thanks for your help, but it wouldn't work...
>> I tried with clogin -autoenable 193.186.1.2 but the enable command 
>> doesn't come.
>> I tried to write the add autoenable 193.186.1.2 1 or 0 on the top of 
>> my cloginrc, without success.
>> 
>> I'am a little bit frustrated about the problem :(
>> 
>> have anybody any other idea?
>> 
>> Realy thanks for every help
>
>When you login to the device manually with the RANCID username, what exactly do you type?  Is it {username}, followed by {password}, then enable, followed by the same {password}?
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.shrubbery.net/pipermail/rancid-discuss/attachments/20120531/9cb2c8dc/attachment.html>